☆ 4.7 Article

Feasibility Study on the Fused Filaments of Injection-Molding-Grade Poly(Ethylene Terephthalate) for 3D Printing

POLYMERS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Experimental Investigation of Polypropylene Composite Drawn Fibers with Talc, Wollastonite, Attapulgite and Single-Wall Carbon Nanotubes

Costas Tsioptsias et al.

Summary: Isotactic polypropylene composite drawn fibers were prepared using different fillers as reinforcement agents. It was found that the use of ultrafine talc particles yields better results, while needle-like fillers such as wollastonite and single-wall carbon nanotubes also showed improved performance.

POLYMERS (2022)

添加到收藏夹

Article Polymer Science

A Review of Polymer-Based Materials for Fused Filament Fabrication (FFF): Focus on Sustainability and Recycled Materials

Daniela Fico et al.

Summary: Fused Filament Fabrication (FFF) is a promising additive manufacturing technique, but there are challenges in converting FFF-printed prototypes into functional objects for industrial applications. Scientists are focusing on developing biodegradable green materials to address the issue of waste disposal from non-biodegradable materials.

POLYMERS (2022)

添加到收藏夹

Article Polymer Science

CaCO3 Polymorphs Used as Additives in Filament Production for 3D Printing

Lucie Zarybnicka et al.

Summary: Additive manufacturing, or 3D printing, is a well-established technology used in various material processing industries. This study investigated the impact of different synthetic polymorphs of calcium carbonate on the properties of polymeric filaments. It was found that aragonite particles had a beneficial effect on the mechanical properties of the filaments.

POLYMERS (2022)

添加到收藏夹

Article Engineering, Manufacturing

Effect of extrusion and fused filament fabrication processing parameters of recycled poly(ethylene terephthalate) on the crystallinity and mechanical properties

Babs Van de Voorde et al.

Summary: This study focuses on the thermal and mechanical behavior of recycled PET after extrusion and 3D printing. The use of recycled PET as feedstock for FFF supports the efforts for improving the sustainability of plastics by valorizing PET waste.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Polymer Science

Improvement of the PLA Crystallinity and Heat Distortion Temperature Optimizing the Content of Nucleating Agents and the Injection Molding Cycle Time

Laura Aliotta et al.

Summary: This study investigates the mechanical and thermo-mechanical behavior of poly(lactic acid) (PLA) blends with different commercial nucleating agents. The crystallinity greatly affects the properties of PLA, and the sensitivity of nucleating agents varies with different injection molding parameters.

POLYMERS (2022)

添加到收藏夹

Review Environmental Sciences

3D printing filament as a second life of waste plastics-a review

Katarzyna Mikula et al.

Summary: In recent years, the issue of plastic recycling has gained significant attention in the 3D printing market, focusing on the production of printable filaments from recycled plastics and devices that allow self-production of filaments for 3D printing from plastic waste.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2021)

添加到收藏夹

Article Engineering, Environmental

A starch-based zwitterionic hydrogel coating for blood-contacting devices with durability and bio-functionality

Mengmeng Yao et al.

Summary: The study developed a novel hydrogel coating that effectively prevents thrombosis, exhibiting excellent biocompatibility and anti-adhesion properties. By introducing specific proteins on the coating surface, it promotes the adhesion and migration of specific cells while reducing the adhesion of others.

CHEMICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Polymer Science

Improvement of Interlayer Adhesion and Heat Resistance of Biodegradable Ternary Blend Composite 3D Printing

Wattanachai Prasong et al.

Summary: Binary and ternary blend composites from PLA/PBAT and PBS with nano talc were prepared and applied to FDM 3D printing. The incorporation of PBS enhanced the crystallinity of the blend composite 3D prints, resulting in improved mechanical properties, heat resistance, and anisotropic characteristics, while the presence of PBAT provided flexibility to the blend composites. The core-shell morphology of the ternary blend influenced the reduction of volume shrinkage, leading to good surface roughness and dimensional accuracy in the ternary blend composite 3D printing.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

A Review on Reinforcement Methods for Polymeric Materials Processed Using Fused Filament Fabrication (FFF)

Juan Pratama et al.

Summary: Fused filament fabrication (FFF) has become a widely used technique for rapid prototyping, but its products are known to have poor mechanical properties. Researchers have explored various reinforcement methods in attempts to improve the mechanical properties of FFF-processed products.

POLYMERS (2021)

添加到收藏夹

Review Polymer Science

Applications of 3D-Printed PEEK via Fused Filament Fabrication: A Systematic Review

Rupak Dua et al.

Summary: PEEK is an organic polymer with excellent performance and ease of 3D printing, currently widely used in various fields. 3D-printed PEEK is mainly done through FFF or FDM printers, with most applications still in the research phase, but progressing towards commercialization in various industries.

POLYMERS (2021)

添加到收藏夹

Review Automation & Control Systems

Gaining a better understanding of the extrusion process in fused filament fabrication 3D printing: a review

Bahaa Shaqour et al.

Summary: Fused filament fabrication 3D printing technology shows great potential but the processability of materials may be a limiting factor. Recent research has focused on optimizing the process to ensure product quality and properties.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Polypropylene/talc foams with high weight-reduction and improved surface quality fabricated by mold-opening microcellular injection molding

Junji Hou et al.

Summary: The study examined the preparation of foamed polypropylene parts using mold-opening microcellular injection molding with talc as a nucleating agent. Talc was found to promote PP crystallization but did not enhance its viscoelasticity. High packing pressure can eliminate cells, improving surface quality, while cell density and size are influenced by packing time and mold-opening distance.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Polymer Science

Effect of Printing Parameters on the Thermal and Mechanical Properties of 3D-Printed PLA and PETG, Using Fused Deposition Modeling

Ming-Hsien Hsueh et al.

Summary: FDM technology is widely used in various industries to manufacture complex geometries and internal structures. The study focused on characterizing the mechanical properties of PLA and PETG materials under different loading conditions, showing that varying printing temperatures and speeds can affect the performance of the materials.

POLYMERS (2021)

添加到收藏夹

Article Crystallography

Comparative Study of the Sensitivity of PLA, ABS, PEEK, and PETG's Mechanical Properties to FDM Printing Process Parameters

Mohammed Algarni et al.

Summary: Fused deposition modeling (FDM) technology has become increasingly prominent in additive manufacturing, with significant advances and diverse applications. Research indicates that infill percentage and layer thickness are the most influential process parameters on the mechanical properties of various materials.

CRYSTALS (2021)

添加到收藏夹

Article Thermodynamics

Comparison of crystallization kinetics of polyethylene terephthalate (PET) and reorganized PET

Amita A. Gaonkar et al.

THERMOCHIMICA ACTA (2020)

添加到收藏夹

Review Polymer Science

Fused Filament Fabrication of PEEK: A Review of Process-Structure-Property Relationships

Ali Reza Zanjanijam et al.

POLYMERS (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Contamination Levels in Recollected PET Bottles from Non-Food Applications and their Impact on the Safety of Recycled PET for Food Contact

Roland Franz et al.

MOLECULES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Semi-Crystalline Polymer Blends for Material Extrusion Additive Manufacturing Printability: A Case Study with Poly(ethylene terephthalate) and Polypropylene

Camden A. Chatham et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2019)

添加到收藏夹

Article Polymer Science

Printability and Tensile Performance of 3D Printed Polyethylene Terephthalate Glycol Using Fused Deposition Modelling

Sofiane Guessasma et al.

POLYMERS (2019)

添加到收藏夹

Article Polymer Science

Physical Foaming and Crosslinking of Polyethylene with Modified Talcum

Anna Kaltenegger-Uray et al.

POLYMERS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Sustainable composite fused deposition modelling filament using recycled pre-consumer polypropylene

David Stoof et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Polymer Science

Correlating molecular and crystallization dynamics to macroscopic fusion and thermodynamic stability in fused deposition modeling; a model study on polylactides

Varun Srinivas et al.

POLYMER (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

A study on the crystallization behavior and mechanical properties of poly(ethylene terephthalate) induced by chemical degradation nucleation

Diran Wang et al.

RSC ADVANCES (2017)

添加到收藏夹

Proceedings Paper Energy & Fuels

Role of crystallinity on moisture absorption and mechanical performance of recycled PET compounds

Takanori Negoro et al.

COE ON SUSTAINABLE ENERGY SYSTEM (THAI-JAPAN) (2016)

添加到收藏夹

Article Materials Science, Composites

Role of polymer/filler interactions in the linear viscoelasticity of poly(butylene succinate)/fumed silica nanocomposite

Xun Chen et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Characterization & Testing

Thermal analysis as a quality tool for assessing the influence of thermo-mechanical degradation on recycled poly(ethylene terephthalate)

J. D. Badia et al.

POLYMER TESTING (2009)

添加到收藏夹

Article Polymer Science

Effect of nucleating agents on crystallization kinetics of PET

X. L. Jiang et al.

EXPRESS POLYMER LETTERS (2007)

添加到收藏夹

Article Polymer Science

Isothermal crystallization kinetics of chain-extended PET

L Sorrentino et al.

JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2005)

添加到收藏夹

Article Polymer Science

Preparation and characterization of PET/Silica nanocomposites

WT Liu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.