☆ 4.7 Article

Pyrolysis Evaluation of Tennis String Polyurethane and Water-Borne Polyurethane Wastes through Isoconversional Kinetic Analysis

POLYMERS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Isoconversional analysis of kinetic pyrolysis of virgin polystyrene and its two real-world packaging wastes

Xuan Ren et al.

Summary: A comparison of EPS, YPS, and PS in high-temperature nitrogen pyrolysis experiments showed that EPS is the most readily pyrolyzed, while YPS is the most thermally stable. Kinetic analysis revealed that activation energies are mass conversion-dependent, with YPS having the highest average activation energy.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2022)

添加到收藏夹

Article Engineering, Environmental

Dynamic pyrolysis behaviors, products, and mechanisms of waste rubber and polyurethane bicycle tires

Xiaojie Tang et al.

Summary: This study investigated the pyrolysis behavior, gaseous products, and reaction mechanisms of waste bicycle tires (RT) and polyurethane tires (PUT) using thermogravimetry (TG), TG-Fourier transform infrared spectroscopy (TG-FTIR), and pyrolysis-gas chromato-graphy/mass spectrometry (Py-GC/MS). The results showed that the decomposition of PUT was easier compared to RT, as confirmed by kinetic, thermodynamic, and comprehensive pyrolysis index data. The pyrolysis mechanism models for RT were described by two-dimensional diffusion and two second-order models, while PUT was best described by three consecutive reaction-order models.

JOURNAL OF HAZARDOUS MATERIALS (2021)

添加到收藏夹

Article Materials Science, Composites

Facile fabrication of NiAl-LDH and its application in TPU nanocomposites targets for reducing fire hazards

Xinliang Liu et al.

Summary: The study demonstrated that NiAl-LDH can improve the thermal stability of TPU/NiAl-LDH nanocomposites, reduce fire hazards, and produce a denser char residue layer with significantly enhanced graphitization degree.

PLASTICS RUBBER AND COMPOSITES (2021)

添加到收藏夹

Article Chemistry, Physical

Kinetic Analysis of Pyrolysis and Thermo-Oxidative Decomposition of Tennis String Nylon Wastes

Haibo Wan et al.

Summary: The thermal degradation of nylon-6 tennis string nylon wastes was studied using multiple heating-rate thermogravimetric analyses in different atmospheres. Kinetic analysis methods were used to calculate activation energy and evaluate thermodynamic parameters during the thermal degradation process.

MATERIALS (2021)

添加到收藏夹

Article Polymer Science

Pyrolysis Kinetic Behaviour of Glass Fibre-Reinforced Epoxy Resin Composites Using Linear and Nonlinear Isoconversional Methods

Samy Yousef et al.

Summary: This research aimed to study the effect of mechanical pre-treatment on the pyrolysis behavior and kinetic of GFRC. Experimental panels were prepared and milled, with the thermal and chemical decomposition of the milled GFRC studied using TG-FTIR and TG-GC-MS. The kinetic analysis revealed activation energies ranging from 165 to 193 KJ/mol using different isoconversional methods.

POLYMERS (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Determining Preexponential Factor in Model-Free Kinetic Methods: How and Why?

Sergey Vyazovkin

Summary: This article highlights the importance of determining the preexponential factor as an integral part of model-free kinetic analysis and the compensation effect as an efficient method for evaluating it. Experimental effects often involve changes in both activation energy and preexponential factor, and are better understood by combining both parameters into the rate constant.

MOLECULES (2021)

添加到收藏夹

Article Polymer Science

A Comparative Study on Suitability of Model-Free and Model-Fitting Kinetic Methods to Non-Isothermal Degradation of Lignocellulosic Materials

Hamayoun Mahmood et al.

Summary: Thermal kinetic modeling is crucial for sustainable processes involving lignocellulosic fuels, with thermal decomposition of three materials analyzed using both model-fitting and isoconversional methods. The activation energy order based on model-free analysis is rice husk > bagasse > wheat straw, recommending isoconversional approach as more realistic and precise for modeling non-isothermal kinetics of lignocellulosic residues.

POLYMERS (2021)

添加到收藏夹

Article Engineering, Civil

Thermal decomposition of flexible polyurethane foams in air

D. S. W. Pau et al.

FIRE SAFETY JOURNAL (2020)

添加到收藏夹

Article Chemistry, Analytical

Temperature-dependent pyrolysis behavior of polyurethane elastomers with different hard- and soft-segment compositions

Yuya Nishiyama et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2020)

添加到收藏夹

Article Polymer Science

Thermal stability of flexible polyurethane foams containing modified layered double hydroxides and zinc borate

Xu Zhang et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2020)

添加到收藏夹

Article Polymer Science

Thermal Decomposition Mechanism and Kinetics Study of Plastic Waste Chlorinated Polyvinyl Chloride

Ru Zhou et al.

POLYMERS (2019)

添加到收藏夹

Article Engineering, Chemical

Thermal Stability of Malonic Acid Dissolved in Poly(vinylpyrrolidone) and Other Polymeric Matrices

Tatsiana Liavitskaya et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2018)

添加到收藏夹

Article Engineering, Environmental

Recycling of polyurethanes from laboratory to industry, a journey towards the sustainability

D. Simon et al.

WASTE MANAGEMENT (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Polyvinylpyrrolidone affects thermal stability of drugs in solid dispersions

Yasmine Ben Osman et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

添加到收藏夹

Article Thermodynamics

A simple and linear isoconversional method to determine the pre-exponential factors and the mathematical reaction mechanism functions

Djalal Trache et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2017)

添加到收藏夹

Article Chemistry, Analytical

Effects of hard-and soft-segment composition on pyrolysis characteristics of MDI, BD, and PTMG-based polyurethane elastomers

Shogo Kumagai et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2017)

添加到收藏夹

Article Polymer Science

Structural and thermal degradation properties of novel metallocene-polyurethanes

Beatriz Lucio et al.

POLYMER DEGRADATION AND STABILITY (2017)

添加到收藏夹

Article Chemistry, Physical

Discovering the kinetics of thermal decomposition during continuous cooling

Tatsiana Liavitskaya et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2016)

添加到收藏夹

Article Chemistry, Applied

Application of genetic algorithm to pyrolysis of typical polymers

Lin Jiang et al.

FUEL PROCESSING TECHNOLOGY (2015)

添加到收藏夹

Article Chemistry, Analytical

Pyrolysis and combustion study of flexible polyurethane foam

M. A. Garrido et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2015)

添加到收藏夹

Article Polymer Science

Effects of different ionizable groups on the thermal properties of waterborne polyurethanes used in bulletproof composites

Yan Li et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2015)

添加到收藏夹

Article Thermodynamics

Solidification and thermal degradation of printable, stretchable electrical conductor from waterborne polyurethane and silver flakes

Hui-Wang Cui et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2015)

添加到收藏夹

Article Chemistry, Analytical

Pyrolysis treatment of waste polyurethane foam in the presence of metallic compounds

O. Terakado et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2014)

添加到收藏夹

Article Chemistry, Physical

Properties and paper sizing application of waterborne polyurethane emulsions synthesized with TDI and IPDI

Yu-hua Guo et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2013)

添加到收藏夹

Article Chemistry, Analytical

TG-FTIR characterization of volatile compounds from flame retardant polyurethane foams materials

Xilei Chen et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2013)

添加到收藏夹

Article Polymer Science

Thermal degradation characteristics of rigid polyurethane foam and the volatile products analysis with TG-FTIR-MS

Lingling Jiao et al.

POLYMER DEGRADATION AND STABILITY (2013)

添加到收藏夹

Article Thermodynamics

Kinetics and volatile products of thermal degradation of building insulation materials

Lingling Jiao et al.

THERMOCHIMICA ACTA (2012)

添加到收藏夹

Article Thermodynamics

DEVELOPMENT OF THE THERMAL DECOMPOSITION MECHANISM OF POLYETHER POLYURETHANE FOAM USING BOTH CONDENSED AND GAS-PHASE RELEASE DATA

Thomas Rogaume et al.

COMBUSTION SCIENCE AND TECHNOLOGY (2011)

添加到收藏夹

Review Thermodynamics

ICTAC Kinetics Committee recommendations for performing kinetic computations on thermal analysis data

Sergey Vyazovkin et al.

THERMOCHIMICA ACTA (2011)

添加到收藏夹

Article Chemistry, Analytical

Investigations on the thermal stability of a MDI based polyurethane elastomer

Dan Rosu et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2010)

添加到收藏夹

Article Chemistry, Physical

Effects of sulfonated polyol on the properties of the resultant aqueous polyurethane dispersions

HT Lee et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2006)

添加到收藏夹

Article Polymer Science

Kinetic analysis of pyrolysis of cross-linked polymers

J Lefebvre et al.

POLYMER DEGRADATION AND STABILITY (2005)

添加到收藏夹

Article Thermodynamics

The determination of activation energy from linear heating rate experiments: a comparison of the accuracy of isoconversion methods

MJ Starink

THERMOCHIMICA ACTA (2003)

添加到收藏夹

Article Polymer Science

Study of the kinetics of pyrolysis of a rigid polyurethane foam: Use of the invariant kinetics parameters method

J Lefebvre et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.