☆ 4.7 Article

Novel Biodegradable Poly (Lactic Acid)/Wood Leachate Composites: Investigation of Antibacterial, Mechanical, Morphological, and Thermal Properties

POLYMERS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Environmental Sciences

Ecotoxic, genotoxic, and cytotoxic potential of leachate obtained from chromated copper arsenate-treated wood ashes

Rahisa Scussel et al.

Summary: This study evaluated the toxicity and genotoxicity of bottom ash leachates originating from burning chromated copper arsenate (CCA)-treated wood. The results showed that the leachates' arsenic and chromium contents had significant effects on the ecotoxicity and genotoxicity of the bottom ash.

ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH (2022)

添加到收藏夹

Article Materials Science, Characterization & Testing

Rotational molding of polylactide (PLA) composites filled with copper slag as a waste filler from metallurgical industry

Mateusz Barczewski et al.

Summary: Research has shown that using waste-based fillers in the production of PLA-based composites can increase hardness and stiffness, with filler concentrations up to 35%. For filler contents below 20%, the composite materials exhibit good structural stability and acceptable mechanical performance. Despite the lack of surface modification, the adhesion between PLA and the filler was beneficial.

POLYMER TESTING (2022)

添加到收藏夹

Article Forestry

Use of Agave durangensis Bagasse Fibers in the Production of Wood-Based Medium Density Fiberboard (MDF)

Oswaldo Moreno-Anguiano et al.

Summary: This study evaluated the feasibility of using Agave durangensis Gentry bagasse fibers for the production of wood-based medium density fiberboard (MDF). It was found that the addition of 10% and 30% ADBF could meet the quality requirements of the panels, and up to 30% ADBF can be used.

FORESTS (2022)

添加到收藏夹

Article Polymer Science

Characteristics of the Waste Wood Biomass and Its Effect on the Properties of Wood Sanding Dust/Recycled PP Composite

Sanita Vitolina et al.

Summary: In order to reduce climate changes, researchers are focusing on decreasing the burning of waste wood biomass and increasing its conversion into value-added products. This study investigates the effect of waste wood biomass on the properties of recycled polypropylene-based wood-plastic composites. The results show that the presence of waste biomass positively affects the mechanical properties, water uptake, and dimensional stability of the composite samples.

POLYMERS (2022)

添加到收藏夹

Article Polymer Science

A Critical Review on Wood-Based Polymer Composites: Processing, Properties, and Prospects

Manickam Ramesh et al.

Summary: Waste recycling is crucial for boosting circular economy, and wood-polymer composites (WPC) offer a wide range of applications with low environmental impact. Rheological characterization techniques are used to evaluate WPC quality. Bio-based adhesives can be used for manufacturing wood composites. WPC plays significant roles in various sectors such as construction and flooring.

POLYMERS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Leveraging the Entrepreneurial Method as a Tool for the Circular Economy: The Case of Wood Waste

Saskia de Klerk et al.

Summary: New policies and regulations promoting a circular economy have increased interest in repurposing commercial waste streams, and firms are now considering reducing and reusing their production waste. This paper explores three case studies from the Australian forestry sector that show how wood waste can be profitably repurposed. Effectual logic allows the reconceptualization of forestry waste streams into inputs for creating new commercial products, driving innovation in Australia's emerging circular economy.

SUSTAINABILITY (2022)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Emerging uses of PLA-PEG copolymer in cancer drug delivery

Rohit Mundel et al.

Summary: Nanotechnology has the potential to revolutionize drug delivery by enabling targeted treatment with minimal side effects. The development of nanopolymer-based drug carriers allows for controlled release of therapeutic drugs, improving the effectiveness and safety of cancer treatment.

3 BIOTECH (2022)

添加到收藏夹

Review Pharmacology & Pharmacy

Poly(Lactic Acid)-Based Microparticles for Drug Delivery Applications: An Overview of Recent Advances

Antonios Vlachopoulos et al.

Summary: The sustained release of pharmaceutical substances through polymeric microparticles is a convenient and widely-used drug delivery system. Poly(lactic acid) and poly(lactic-co-glycolic acid) microparticles are frequently used biodegradable carriers for drug encapsulation.

PHARMACEUTICS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

A facile structural manipulation strategy to prepare ultra-strong, super-tough, and thermally stable polylactide/nucleating agent composites

Tairong Kuang et al.

Summary: This study reported a facile strategy for fabricating high-performance PLA composites by adding self-assembled nucleation agent, which achieved a chain-like interlocking shish-kebab crystal structure and resulted in superior mechanical properties and thermal stability. Thus, the super-PLA materials could serve as potential alternatives to commodity and engineering plastics.

ADVANCED COMPOSITES AND HYBRID MATERIALS (2022)

添加到收藏夹

Article Engineering, Environmental

Bio-inspired water resistant and fast multi-responsive Janus actuator assembled by cellulose nanopaper and graphene with lignin adhesion

Xinpeng Che et al.

Summary: In this study, a novel Janus film with multi-responses to humidity, near-infrared radiation, and electrical stimulation was successfully fabricated as a flexible actuator. The film exhibited excellent mechanical strength and durability, making it a promising candidate for various practical applications.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Energy & Fuels

Comparative study of seven agricultural wastes for renewable heat and power generation using integrated gasification combined cycle based on energy and exergy analyses

Mohammad Hassan Shahavi et al.

Summary: The aim of this study was to produce renewable energy from agricultural waste through waste gasification integrated with low-temperature air separation, gas turbine, and CO2 power generation cycle. The results showed that rice husk and milled straw were the most efficient materials for gasification, generating the highest amount of electricity and thermal energy.

FUEL (2022)

添加到收藏夹

Review Engineering, Chemical

Recent developments in the performance of micro/nanoparticle-modified urea-formaldehyde resins used as wood-based composite binders: A review

Ali Dorieh et al.

Summary: This article discusses the application of urea-formaldehyde resins (UFs) in wood panels technology and emphasizes the importance of nanotechnology in improving the properties of UF resins.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Additive manufacturing of antibacterial PLA-ZnO nanocomposites: Benefits, limitations and open challenges

Wei Juene Chong et al.

Summary: This review introduces PLA-ZnO nanocomposites and analyzes the main factors influencing their antibacterial activity. The importance of embedded antibacterial functions in applications such as food packaging and wound dressing is discussed. The emerging research on the additive manufacturing of PLA-ZnO nanocomposites, particularly in fused filament fabrication, is highlighted, along with the associated challenges.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Review Chemistry, Applied

A review of recent progress in melamine-formaldehyde resin based nanocomposites as coating materials

Ali Dorieh et al.

Summary: Nanomaterials play a crucial role in enhancing the performance of MFR adhesives, improving mechanical properties, thermal stability, fire retardancy, and reducing free formaldehyde emission. The use of nanotechnology in synthesizing MFR nanocomposites can significantly decrease environmental and health hazards.

PROGRESS IN ORGANIC COATINGS (2022)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Optimization and significance of fabrication parameters on the mechanical properties of 3D printed Chitosan/PLA scaffold

Johnson Kehinde Abifarin et al.

Summary: This study investigated the fabrication parameters of 3D printed chitosan/PLA scaffold and their effects on the mechanical responses. It was found that the wt% of chitosan, infill density, and annealing temperature all had an impact on the mechanical properties of the composite. By optimizing these parameters, a mechanically enhanced scaffold could be fabricated.

MATERIALS TODAY-PROCEEDINGS (2022)

添加到收藏夹

Article Polymer Science

Experimental study ofPLAthermal behavior during fused filament fabrication

Hamid Reza Vanaei et al.

Summary: Fused filament fabrication (FFF) is an additive manufacturing technique used for producing prototypes and final products. Experimental measurements of filament temperature during deposition were compared to a model, showing good agreement, especially regarding reheating peaks when new filaments are deposited. The developed experimental technique demonstrates sensitivity to changing operating conditions and can help predict bond quality in FFF parts more accurately.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Chemistry, Applied

Preparation of a novel biodegradable packaging film based on corn starch-chitosan and poloxamers

Abril Fonseca-Garcia et al.

Summary: Starch and chitosan-based biodegradable materials can be enhanced with the addition of Pluronic F127 to increase their hydrophobicity and improve water vapor barrier properties, resulting in a more homogeneous and smoother surface.

CARBOHYDRATE POLYMERS (2021)

添加到收藏夹

Article Agricultural Engineering

The quality of composts prepared in automatic composters from fruit waste generated by the production of beverages

Helena Raclavska et al.

Summary: Processing food waste from food and beverage production in automatic composters can be challenging due to the physicochemical properties of input materials. Optimization by adding bulk materials like sawdust can help, but some compounds in these materials may cause toxicity in the compost. Release of tannins and phenolic compounds could have a significant impact on compost quality.

BIORESOURCE TECHNOLOGY (2021)

添加到收藏夹

Review Forestry

The role of lignin in wood working processes using elevated temperatures: an abbreviated literature survey

Zoltan Borcsok et al.

Summary: Lignin, cellulose, and hemicelluloses in wood are polymers bonded together in wood, with lignin having a highly branched, amorphous, three-dimensional structure. Lignin softening at around 100 degrees C plays a significant role in woodworking processes and understanding this process can lead to improvements in industrial processes.

EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2021)

添加到收藏夹

Article Chemistry, Physical

Are nickel- and titanium- doped fullerenes suitable adsorbents for dopamine in an aqueous solution? Detailed DFT and AIM studies

Ali Shokuhi Rad et al.

Summary: This study investigated the enhancement of fullerene C60 polarity in water by doping titanium and nickel atoms, and explored the adsorption of dopamine on generated metallofullerenes using density functional theory. The results showed that the most energetically favorable positions had adsorption energy values of -311.4 and -157.8 kJ/mol using Ti- and Ni-doped fullerene, respectively. Atom in molecule (AIM) calculations revealed the ionic bond responsible for attaching dopamine molecule to each metallofullerene, with detailed analysis from the perspective of quantum chemistry.

JOURNAL OF MOLECULAR LIQUIDS (2021)

添加到收藏夹

Article Engineering, Chemical

Reducing free formaldehyde emission, improvement of thickness swelling and increasing storage stability of novel medium density fiberboard by urea-formaldehyde adhesive modified by phenol derivatives

Peyman Pouresmaeel Selakjani et al.

Summary: This study successfully reduced the free formaldehyde emission of medium density fiberboard by adding phenolic compounds to urea-formaldehyde polymer, resulting in improved water resistance and lower thickness swelling, thus showing potential benefits for the production industry.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new cyanoacrylate-poly(lactic acid)-based system for a wound dressing with on-demand removal

Jimin Liu et al.

Summary: The study developed a new polymeric system based on poly(lactic acid)-modified cyanoacrylate (PLA-CA), which could rapidly polymerize into flexible solid films on skin and wound surfaces, providing excellent adhesion and coverage protection, and easy removal. After antimicrobial, biocompatibility, and cytotoxicity testing, the system showed potential as a wound dressing material.

MATERIALS LETTERS (2021)

添加到收藏夹

Article Polymer Science

Eco-Friendly Fiberboard Panels from Recycled Fibers Bonded with Calcium Lignosulfonate

Petar Antov et al.

Summary: The study investigated the potential of using residual softwood fibers from the pulp and paper industry to produce eco-friendly, zero-formaldehyde fiberboard panels, bonded with a lignin-based, formaldehyde-free adhesive. The fiberboards produced had close-to-zero formaldehyde content but exhibited some drawbacks in moisture-related properties.

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Modification of PLA Scaffold Surface for Medical Applications

Michal Mlotek et al.

Summary: The research aims to increase the wettability and porosity of the membrane's surface, using dielectric barrier discharge to effectively modify the polyactide membranes without damaging their structure. Membranes prepared by dry phase inversion were easier to modify and showed higher surface free energy values after modification.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Pharmacology & Pharmacy

Preparation and Characterization of Electrospun Polylactic Acid (PLA) Fiber Loaded with Birch Bark Triterpene Extract for Wound Dressing

Tianyuan Fan et al.

Summary: Polylactic acid (PLA) was chosen as the electrospinnable polymer for producing triterpene extract (TE)-loaded electrospun fibers. A binary solvent system of dichloromethane (DCM) and dimethyl sulfoxide (DMSO) was optimized for preparing smooth and uniform fibers. The results revealed that TE-loaded electrospun PLA microfibers have promising future prospects in wound therapy.

AAPS PHARMSCITECH (2021)

添加到收藏夹

Article Materials Science, Composites

Physical, mechanical, and thermal properties of Dalbergia sissoo wood waste-filled poly(lactic acid) composites

Tej Singh et al.

Summary: The study found that increasing wood waste content resulted in certain properties of the composite materials increasing, such as modulus, porosity, and water absorption, while other properties decreased such as density, tensile strength, impact strength, and stress at break. However, the flexural strength of the composites remained relatively constant. Differential scanning calorimetry analysis showed that wood waste helped increase the glass transition and cold crystallization temperature of PLA composites.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Experimental, Theoretical and Simulation Studies on the Thermal Behavior of PLA-Based Nanocomposites Reinforced with Different Carbonaceous Fillers

Giovanni Spinelli et al.

Summary: This study focuses on the thermal properties of poly(lactic acid) filled with different nanomaterials, and suggests that loading TNIGNP can significantly enhance thermal conductivity. Experimental design and response surface analysis were used to provide insights for potential heat transfer applications.

NANOMATERIALS (2021)

添加到收藏夹

Article Environmental Sciences

Future-proofing plastic waste management for a circular bioeconomy

Ana L. Patricio Silva

Summary: Advancements in biotechnology and polymer chemistry have enabled the production of more sustainable biobased plastics, but their distinct chemical structures from fossil-based plastics may disrupt current recycling systems, hindering the achievement of a circular economy.

CURRENT OPINION IN ENVIRONMENTAL SCIENCE & HEALTH (2021)

添加到收藏夹

Review Food Science & Technology

The antibacterial properties of phenolic isomers, carvacrol and thymol

Karina Kachur et al.

CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2020)

添加到收藏夹

Article Engineering, Chemical

Fabrication of Biocompatible Composites of Poly(lactic acid)/Hydroxyapatite Envisioning Medical Applications

Eduardo Henrique Backes et al.

POLYMER ENGINEERING AND SCIENCE (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

Tailored crystallization behavior, thermal stability, and biodegradability of poly(ethylene adipate): Effects of a biocompatible diamide nucleating agent

Jingjing Tang et al.

POLYMER TESTING (2020)

添加到收藏夹

Review Food Science & Technology

Soft and hard sections from cellulose-reinforced poly(lactic acid)-based food packaging films: A critical review

Azadeh Khosravi et al.

FOOD PACKAGING AND SHELF LIFE (2020)

添加到收藏夹

Article Materials Science, Composites

Lignocellulosic fillers and graphene nanoplatelets as hybrid reinforcement for polylactic acid: Effect on mechanical properties and degradability

Roberto Scaffaro et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Multifunctional PLA Blends Containing Chitosan Mediated Silver Nanoparticles: Thermal, Mechanical, Antibacterial, and Degradation Properties

Agueda Sonseca et al.

NANOMATERIALS (2020)

添加到收藏夹

Article Polymer Science

Poly(lactic Acid)-Biochar Biocomposites: Effect of Processing and Filler Content on Rheological, Thermal, and Mechanical Properties

Rossella Arrigo et al.

POLYMERS (2020)

添加到收藏夹

Article Polymer Science

Rotational Molding of Linear Low-Density Polyethylene Composites Filled with Wheat Bran

Aleksander Hejna et al.

POLYMERS (2020)

添加到收藏夹

Article Engineering, Manufacturing

Mechanical Properties of Direct Waste Printing of Polylactic Acid with Universal Pellets Extruder: Comparison to Fused Filament Fabrication on Open-Source Desktop Three-Dimensional Printers

Arthur Alexandre et al.

3D PRINTING AND ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Study of the matrix-filler interface in PLA/Mg composites manufactured by Material Extrusion using a colloidal feedstock

A. Ferrandez-Montero et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Chemistry, Physical

Surface Activation of Polylactic Acid-Based Wood-Plastic Composite by Atmospheric Pressure Plasma Treatment

Philipp Sauerbier et al.

MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

The recycling potential of wood waste into wood-wool/cement composite

F. Berger et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Review Biochemistry & Molecular Biology

Poly (lactic acid) blends: Processing, properties and applications

Mohammadreza Nofar et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Article Thermodynamics

The application of the synergistic effect between the crystal structure of poly(lactic acid) (PLA) and the presence of ethylene vinyl acetate copolymer (EVA) to produce highly ductile PLA/EVA blends

Tamas Tabi

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Mechanics

Impact of thermal modification on the chemical changes and impact bending strength of European oak and Norway spruce wood

Milan Gaff et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Review Polymer Science

Degradation and Recycling of Films Based on Biodegradable Polymers: A Short Review

Roberto Scaffaro et al.

POLYMERS (2019)

添加到收藏夹

Article Engineering, Chemical

Direct filtration procedure to attain antibacterial TFC membrane: A facile developing route of membrane surface properties and fouling resistance

Atefe Soleymani Lashkenrai et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)

添加到收藏夹

Article Polymer Science

Surface hydrophobisation of lignocellulosic waste for biothermoelastoplastic composites

Korneliusz Wolski et al.

EUROPEAN POLYMER JOURNAL (2019)

添加到收藏夹

Article Thermodynamics

TGA-FTIR study on the slow pyrolysis of lignin and cellulose-rich fractions derived from imidazolium-based ionic liquid pre-treatment of sugarcane straw

Pobitra Halder et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Agricultural Engineering

Biochar as a cheap and environmental friendly filler able to improve polymer mechanical properties

Mauro Giorcelli et al.

BIOMASS & BIOENERGY (2019)

添加到收藏夹

Article Engineering, Environmental

Influence of wood ash pre-treatment on leaching behaviour, liming and fertilising potential

A. Maresca et al.

WASTE MANAGEMENT (2019)

添加到收藏夹

Article Polymer Science

Effect of Lignin Plasticization on Physico-Mechanical Properties of Lignin/Poly(Lactic Acid) Composites

Chan-Woo Park et al.

POLYMERS (2019)

添加到收藏夹

Article Engineering, Chemical

Investigating the Effect of Treated Rice Straw in PLLA/Starch Composite: Mechanical, Thermal, Rheological, and Morphological Study

Seyed Mohammad Davachi et al.

ADVANCES IN POLYMER TECHNOLOGY (2018)

添加到收藏夹

Article Agriculture, Multidisciplinary

Novel Brassinosteroid-Modified Polyethylene Glycol Micelles for Controlled Release of Agrochemicals

Javier Perez Quinones et al.

JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2018)

添加到收藏夹

Article Engineering, Chemical

Superporous pellicular kappa-Carrageenan-Nickel composite beads; morphological, physical and hydrodynamics evaluation for expanded bed adsorption application

Mohadese Niksefat Abatari et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2017)

添加到收藏夹

Article Engineering, Chemical

Clove oil nanoemulsion as an effective antibacterial agent: Taguchi optimization method

Mohammad Hassan Shahavi et al.

DESALINATION AND WATER TREATMENT (2016)

添加到收藏夹

Article Environmental Sciences

Characterization of wood mulch and leachate/runoff from three wood recycling facilities

Sarat Kannepalli et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2016)

添加到收藏夹

Review Multidisciplinary Sciences

Sustainable polymers from renewable resources

Yunqing Zhu et al.

NATURE (2016)

添加到收藏夹

Article Polymer Science

Effect of Lignin Removal on Mechanical, Thermal, and Morphological Properties of Polylactide/Starch/Rice Husk Blend Used in Food Packaging

Jamshid Mohammadi-Rovshandeh et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Maleic-Anhydride Grafting on the Physical and Mechanical Properties of Poly(L-lactic acid)/Starch Blends

Sung Wook Hwang et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2013)

添加到收藏夹

Review Materials Science, Multidisciplinary

Bioadhesives for Wood and Fibres: A Critical Review

A. Pizzi

REVIEWS OF ADHESION AND ADHESIVES (2013)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.