期刊
POLYMERS
卷 14, 期 11, 页码 -出版社
MDPI
DOI: 10.3390/polym14112165
关键词
bio-polyurethane resins; impregnation; lignin; ramie fibers; thermal stability; mechanical properties
资金
- National Research and Innovation Agency of Republic of Indonesia
The aim of this study was to enhance the thermal and mechanical properties of ramie fiber through impregnation with low-viscosity lignin-based polyurethane (LPU) resins. The LPU resins were synthesized by dissolving lignin in 20% NaOH and adding polymeric 4,4-methane diphenyl diisocyanate (pMDI) with a mole ratio of 0.3 NCO/OH. Impregnation of ramie fiber with LPU resins led to the formation of urethane bonds, increasing thermal stability by an average of 6% and mechanical properties by an average of 100% compared to untreated fiber. The best results were obtained with LPU-ethyl acetate, with a residual weight of 22% and tensile strength of 648.7 MPa after 30 minutes of impregnation.
The purpose of this study was to prepare low-viscosity lignin-based polyurethane (LPU) resins for the modification of ramie (Boehmeria nivea (L.) Gaudich) fiber via impregnation to improve the fiber's thermal and mechanical properties. Low-viscosity LPU resins were prepared by dissolving lignin in 20% NaOH and then adding polymeric 4,4-methane diphenyl diisocyanate (pMDI, 31% NCO) with a mole ratio of 0.3 NCO/OH. Ramie fiber was impregnated with LPU in a vacuum chamber equipped with a two-stage vacuum pump. Several techniques such as Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry, thermogravimetric analysis, pyrolysis-gas chromatography-mass spectroscopy, field emission-scanning electron microscopy coupled with energy dispersive X-ray (EDX), and a universal testing machine were used to characterize lignin, LPU, and ramie fiber. The LPU resins had low viscosity ranging from 77 to 317 mPa center dot s(-1). According to FTIR and EDX analysis, urethane bonds were formed during the synthesis of LPU resins and after impregnation into ramie fibers. After impregnation, the reaction between the LPU's urethane group and the hydroxy group of ramie fiber increased thermal stability by an average of 6% and mechanical properties by an average of 100% compared to the untreated ramie fiber. The highest thermal stability and tensile strength were obtained at ramie impregnated with LPU-ethyl acetate for 30 min, with a residual weight of 22% and tensile strength of 648.7 MPa. This study showed that impregnation with LPU resins can enhance the thermal and mechanical properties of fibers and increase their wider industrial utilization in value-added applications.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据