☆ 4.7 Article

Effect of Dispersing Multiwalled Carbon Nanotubes and Graphene Nanoplatelets Hybrids in the Matrix on the Flexural Fatigue Properties of Carbon/Epoxy Composites

POLYMERS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Computer Science, Interdisciplinary Applications

A Review on Fracture Analysis of CNT/Graphene Reinforced Composites for Structural Applications

Aanchal Yadav et al.

Summary: This review summarizes the fracture analysis of CNT/Graphene reinforced composites, including fabrication methods and potential applications. Various modeling techniques and computational formulations for fracture mechanics are discussed in detail, providing valuable insights for the broader application of these composites.

ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

A review on the mechanical properties of polymer composites reinforced by carbon nanotubes and graphene

Amit Kumar et al.

Summary: This review compares the properties of carbon nanotubes (CNTs) and graphene in polymer composites, discussing their surface characteristics, functionalization effects, and mechanical properties. Furthermore, potential applications and future challenges regarding filler and their polymer composites are also addressed.

CARBON LETTERS (2021)

添加到收藏夹

Article Polymer Science

Temperature-Dependent Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Tensile Quasi-Static and Fatigue Properties of Epoxy Nanocomposites

Yi-Ming Jen et al.

Summary: This study investigates the influence of temperature on the mechanical properties of polymer nanocomposites, specifically the fatigue behavior of hybrid polymer nanocomposites. It was found that nanocomposites with a MWCNT:GNP ratio of 9:1 exhibit higher strength and endurance at different temperatures, with an increased synergistic effect at higher temperatures. The study also reveals that the reinforcement mechanisms of crack deflection and bridging by nanofillers play a key role in improving the studied properties.

POLYMERS (2021)

添加到收藏夹

Article Polymer Science

The Influence of Sonication Processing Conditions on Electrical and Mechanical Properties of Single and Hybrid Epoxy Nanocomposites Filled with Carbon Nanoparticles

Matheus Mendes de Oliveira et al.

Summary: Graphene nanoplatelets (GNP) and carbon nanotubes (CNT) are used to enhance electrical and mechanical properties of epoxy-based nanocomposites. Direct and indirect ultrasonication methods were used to prepare single- and hybrid-filled GNP-CNT-epoxy nanocomposites, with results showing that high-power direct sonication degrades electrical conductivity in the nanocomposites while indirect sonication improves dispersion and conductivity. Dynamic mechanical analysis revealed that nanofillers improved epoxy's storage modulus by up to 84%, with processing parameters having limited effect on this property. However, the decrease in crosslinking degree and presence of residual solvent lowered the glass transition temperature due to plasticization effects.

POLYMERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of hybrid nanoparticles on thermal, electrical conductivity, microstructure, and hardness behavior of nanocomposite matrix

Salem S. Abdel Aziz et al.

Summary: In this study, wrought AA2024 alloy sheets were used as the base metal matrix and reinforced with SiC, BN nanoparticles, and VC particles to fabricate mono and hybrid metal matrix nanocomposites through friction stir process. The hybrid nanocomposite exhibited improved hardness, enhanced microstructure distribution, and reduced thermal conductivity compared to the base alloy and mono composites. The electrical conductivity was significantly affected by the volume fraction of reinforcement particles with different sizes.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Mechanical properties and structural health monitoring performance of carbon nanotube-modified FRP composites: A review

Jianbin Li et al.

Summary: The article provides an extensive review of the methods for incorporating carbon nanotubes (CNTs) into fiber-reinforced polymer composites, their impact on the mechanical properties, and their potential applications in structural health monitoring. Research shows that CNTs have the potential for nondestructive identification and structural health monitoring of composite structures.

NANOTECHNOLOGY REVIEWS (2021)

添加到收藏夹

Article Engineering, Mechanical

Fatigue analysis and fracture toughness of graphene reinforced carbon fibre polymer composites

Md Sarower Tareq et al.

Summary: The study investigated the fatigue behavior and interlaminar fracture toughness of CFRPCs modified by graphene nanoplatelets, with results showing that adding 0.1% of nanoparticles can improve fatigue life and increase interlaminar fracture toughness.

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of methods for improving interlaminar interfaces and fracture toughness of laminated composites

Yi Di Boon et al.

MATERIALS TODAY COMMUNICATIONS (2020)

添加到收藏夹

Article Polymer Science

Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Monotonic and Fatigue Properties of Uncracked and Cracked Epoxy Composites

Yi-Ming Jen et al.

POLYMERS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review-Surface Modification of Carbon Nanotubes: A Tool to Control Electrochemical Performance

Muhammad Atif et al.

ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Manufacturing

Damage mechanisms of tailored few-layer graphene modified CFRP cross-ply laminates

Christian Leopold et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of adding graphene nanoplatelets and nanocarbon aerogels to epoxy resins and their carbon fiber composites

Yung-Chuan Chiou et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review of the mechanical and thermal properties of graphene and its hybrid polymer nanocomposites for structural applications

Amit Kumar et al.

JOURNAL OF MATERIALS SCIENCE (2019)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

An experimental investigation on mechanical properties of hybrid polymer nanocomposites

G. Naveen Kumar et al.

MATERIALS TODAY-PROCEEDINGS (2019)

添加到收藏夹

Article Materials Science, Composites

Effect of SWCNTs and graphene on the fatigue behavior of antisymmetric GFRP laminate

Mostefa Bourchak et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Composites

Synergy effects of graphene and multiwalled carbon nanotubes hybrid system on properties of epoxy nanocomposites

Z. A. Ghaleb et al.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Use of Nanoparticles for Enhancing the Interlaminar Properties of Fiber-Reinforced Composites and Adhesively Bonded Joints-A Review

Davide De Cicco et al.

NANOMATERIALS (2017)

添加到收藏夹

Article Materials Science, Composites

Fatigue delamination of a carbon fabric/epoxy laminate with carbon nanotubes

Martin Kadlec et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Review Engineering, Manufacturing

Synergy in hybrid polymer/nanocarbon composites. A review

Urszula Szeluga et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

Synergetic Effects of Mechanical Properties on Graphene Nanoplatelet and Multiwalled Carbon Nanotube Hybrids Reinforced Epoxy/Carbon Fiber Composites

Pin-Ning Wang et al.

JOURNAL OF NANOMATERIALS (2015)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Natural Fibre Reinforced Composite Laminates - A Review

Nitin Jauhari et al.

MATERIALS TODAY-PROCEEDINGS (2015)

添加到收藏夹

Article Engineering, Manufacturing

The effect of carbon nanoparticles on the fatigue performance of carbon fibre reinforced epoxy

J. B. Knoll et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

添加到收藏夹

Article Engineering, Manufacturing

Hybrid nanoreinforced carbon/epoxy composites for enhanced damage tolerance and fatigue life

Joel S. Fenner et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Fatigue behaviour of glass fibre reinforced epoxy composites enhanced with nanoparticles

L. P. Borrego et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Polymer Science

Role of functionalized multiwalled carbon nanotubes on mechanical properties of epoxy-based composites at cryogenic temperature

Yuxin He et al.

HIGH PERFORMANCE POLYMERS (2014)

添加到收藏夹

Review Chemistry, Physical

Synthetic Strategies in the Preparation of Polymer/Inorganic Hybrid Nanoparticles

Matthew A. Hood et al.

MATERIALS (2014)

添加到收藏夹

Review Materials Science, Composites

Interlaminar fracture toughness and CAI strength of fibre-reinforced composites with nanoparticles - A review

Youhong Tang et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2013)

添加到收藏夹

Article Thermodynamics

Cryogenic mechanical properties of woven glass/epoxy composites modified with multi-walled carbon nanotube and n-butyl glycidyl ether under tensile static and cyclic loadings

Tomo Takeda et al.

CRYOGENICS (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical Properties and Tensile Fatigue of Graphene Nanoplatelets Reinforced Polymer Nanocomposites

Ming-Yuan Shen et al.

JOURNAL OF NANOMATERIALS (2013)

添加到收藏夹

Review Materials Science, Textiles

Three-dimensional braiding for composites: A review

Kadir Bilisik

TEXTILE RESEARCH JOURNAL (2013)

添加到收藏夹

Proceedings Paper Construction & Building Technology

Fatigue testing of carbon fibre reinforced polymers under VHCF loading

M. Gude et al.

MATERIALS SCIENCE ENGINEERING, SYMPOSIUM B6 - HYBRID STRUCTURES (2013)

添加到收藏夹

Article Materials Science, Composites

On the fatigue life prediction of CFRP laminates using the Electrical Resistance Change method

A. Vavouliotis et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dramatic Increase in Fatigue Life in Hierarchical Graphene Composites

F. Yavari et al.

ACS APPLIED MATERIALS & INTERFACES (2010)

添加到收藏夹

Article Engineering, Manufacturing

Improvement of fatigue life by incorporation of nanoparticles in glass fibre reinforced epoxy

Lars Boeger et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

添加到收藏夹

Article Materials Science, Composites

Enhancement of delamination fatigue resistance in carbon nanotube reinforced glass fiber/polymer composites

Christopher S. Grimmer et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Materials Science, Composites

Impact and after-impact properties of carbon fibre reinforced composites enhanced with multi-wall carbon nanotubes

V. Kostopoulos et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical behavior of advanced nano-laminates embedded with carbon nanotubes - a review

G. Zhou et al.

INTERNATIONAL JOURNAL OF SMART AND NANO MATERIALS (2010)

添加到收藏夹

Article Polymer Science

FTIR and SEM analysis of polyester- and epoxy-based composites manufactured by VARTM process

Volkan Cecen et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-cycle fatigue of hybrid carbon nanotube/glass fiber/polymer composites

Christopher S. Grimmer et al.

JOURNAL OF MATERIALS SCIENCE (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.