相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Calibration of the residual stresses with an active die during the ejection phase of cold extrusion
Alessandro Franceschi et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2021)
Homogenization of the interfacial bonding of compound-cast AA7075/6060 bilayer billets by co-extrusion
Hui Chen et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2021)
Characterization of damage in forward rod extruded parts
Oliver Hering et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2020)
Flow curves up to high strains considering load reversal and damage
Oliver Hering et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2019)
Extrusion of the Magnesium-Nickel Alloys
Stanka Tomovic-Petrovic et al.
PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) (2019)
The Hot Spot in Al-Rod Extrusion Investigated by FEM-analysis
Henry S. Valberg et al.
PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) (2019)
Extrusion of magnesium alloy hollow profiles with axial variable wall thickness
Maik Negendank et al.
PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) (2019)
Backward Rod Extrusion of Bimetallic Aluminum-Copper Alloys at Room Temperature
V. Sanabria et al.
PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) (2019)
Numerical Investigations on the Cold Welding of Aluminum and Steel using Forward Extrusion
Mehmet Okan Gortan et al.
PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) (2019)
Evaluation of some Non-Edible Vegetable Oils as Lubricants for Conventional and Non-Conventional Metal Forming Processes
Chiedu U. Idegwu et al.
PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019) (2019)
Metal Flow and Temperature in Direct Extrusion of Large-Size Aluminum Billets
Henry Valberg et al.
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)
A Sustainable solid state recycling of pure Aluminum by means of Friction Stir Extrusion process (FSE)
Mohamad El Mehtedi et al.
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)
Optimized Manufacture of Nuclear Fuel Cladding Tubes by FEA of Hot Extrusion and Cold Pilgering Processes
Alexis Gaillac et al.
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)
Investigation of Multi-Stage Cold Forward Extrusion Process Using Coupled Thermo-Mechanical Finite Element Analysis
Mehmet Okan Gortan
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)
Experimental study on combined cold forging process of backward cup extrusion and piercing
Robinson Henry et al.
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)
Modification of the Anisotropy and Strength Differential Effect of extruded AZ31 by Extrusion-Shear
M. Jaehnke et al.
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)
Complex deformation routes for direct recycling aluminium alloy scrap via industrial hot extrusion
Dimos Paraskevas et al.
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)
Study on the extrusion of nickel-based spark plug electrodes by numerical simulation
Q. Saby et al.
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)
Numerical Investigations on the Lateral Angular Co-Extrusion of Aluminium and Steel
B. -A. Behrens et al.
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)
Study on Numerical Simulation of Asymmetric Structure Aluminum Profile Extrusion Based on ALE Method
Kun Chen et al.
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)
A FEM Simulation Study of the Solid State Hydrostatic Extrusion of PMMA
Andre L. M. Costa et al.
PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018) (2018)
Solid state recycling of aluminium alloys via a porthole die hot extrusion process: Scaling up to production
Dimos Paraskevas et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Influence of Temperature and Sliding Speed on the Subsurface Microstructure Evolution of EN AW-6060 under Sticking Friction Conditions
Vidal Sanabria et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Tribological Investigations of the Applicability of Surface Functionalization for Dry Extrusion Processes
Marco Teller et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Co-Extrusion of Semi-Finished Aluminium-Steel Compounds
S. E. Thuerer et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Shear Zone Formation within the Billet and Metal Flow Through the Die Orifice in Unlubricated Axisymmetric Forward and Backward Extrusion
Henry Valberg et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Coupled Modelling of Aluminium Profiles Extrusion and Product Quality Improvement by Means of Simulation
Nikolay Biba et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Optimization of Porthole Die Geometrical Variables by Taguchi Method
F. Gagliardi et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Investigation of Cold Extrusion Process Using Coupled Thermo-Mechanical FEM Analysis and Adaptive Friction Modeling
Mehmet Okan Gortan
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Hybrid Deep Drawing Tool for Lubricant Free Deep Drawing
Christina Guilleaume et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Numerical study of combined process of backward cup extrusion and piercing
Robinson Henry et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Forward impact extrusion of surface textured steel blanks using coated tooling
Rafael Hild et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Comparison of Updated Lagrangian FEM with Arbitrary Lagrangian Eulerian method for 3D thermo-mechanical extrusion of a tube profile
J. Kronsteiner et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Extension of the normalized Cockcroft and Latham criterion with temperature-dependent critical damage values for predicting chevron cracks in solid forward extrusion
Michael Terhorst et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2016)
AZ31 magnesium alloy recycling through friction stir extrusion process
Gianluca Buffa et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2016)
Die Swell as an Objective in the Design of Polymer Extrusion Dies
Roland Siegbert et al.
PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016) (2016)
Experimental determination of plastic strain in the extrusion process
J. Kronsteiner et al.
PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016) (2016)
Tailoring properties of commercially pure titanium by Gradation Extrusion
Markus Bergmann et al.
PROCEEDINGS OF THE 19TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2016) (2016)
Investigation of friction boundary conditions during extrusion of aluminium and magnesium alloys
Vidal Sanabria et al.
MATERIAL FORMING ESAFORM 2014 (2014)
Metal Flow Conditions in Porthole Channels of Different Size
Valberg Henry et al.
MATERIAL FORMING ESAFORM 2014 (2014)
Increased Productivity in Hot Aluminum Extrusion by Using Extrusion Dies with Inner Cooling Channels Manufactured by Rapid Tooling
Ramona Hoelker et al.
MATERIAL FORMING ESAFORM 2014 (2014)
Use of FEM and DoE to reduce the forming force during cold extrusion of prismatic cell housings
Michael Austen et al.
MATERIAL FORMING ESAFORM 2014 (2014)
Microstructure and mechanical properties of magnesium AZ31 sheets produced by extrusion
Sven Gall et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2013)
A new testing machine to determine the behaviour of aluminium granulate under combined pressure and shear
Fredrik Wideroe et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2013)
Energy-efficient solid forward extrusion through hybridization based on process-integrated resistance heating
Michael Terhorst et al.
CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3 (2013)
Modeling approach for the determination of material flow and welding conditions in porthole die extrusion with gas pocket formation
M. Schwane et al.
CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3 (2013)
Design Criteria in Numerical Design of Profile Extrusion Dies
R. Siegbert et al.
CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3 (2013)
Coextrusion and mechanical characterization of aluminum coated Mg-profiles
Maik Negendank et al.
CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3 (2013)
Composite extrusion of thin aluminum profiles with high reinforcing volume
Daniel Pietzka et al.
CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3 (2013)
Velocity field in direct, indirect and friction assisted extrusion of Al
Sepinood Torabzadeh Khorasani et al.
CURRENT STATE-OF-THE-ART ON MATERIAL FORMING: NUMERICAL AND EXPERIMENTAL APPROACHES AT DIFFERENT LENGTH-SCALES, PTS 1-3 (2013)
On the fundamental mechanism of seam welding in extrusion of aluminum alloys
Henry Valberg et al.
MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2 (2012)
An investigation of the material flow in a screw extruder of aluminium using contrast material
Fredrik Wideroe et al.
MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2 (2012)
Numerical approach for the evaluation of seam welding criteria in extrusion processes
M. Schwane et al.
MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2 (2012)
Effect of process parameters on seam weld quality of ZM21 tubes
A. Segatori et al.
MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2 (2012)
Metal flow in two-hole extrusion of Al-alloys studied by FEA with experiments
Janis Kandis et al.
MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2 (2012)
Comparison between FEM Simulations and Analytical Calculations of Required Force for Al Extrusion
Sepinood Torabzadeh Khorasani et al.
MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2 (2012)
Effect of porthole design and welding chamber dimensions on material flow and weld deformability of extruded aluminium profiles
Lorenzo Donati et al.
MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2 (2012)
The Model for Coupled Simulation of Thin Profile Extrusion
Nikolay Biba et al.
MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2 (2012)
Constitutive equations for Finite Element simulation
Carlo Bruni et al.
MATERIAL FORMING - ESAFORM 2012, PTS 1 & 2 (2012)
Investigation And Prediction of Grain Texture Evolution in AA6082
A. Segatori et al.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)
Study Of The Wet Multipass Drawing Process Applied On High Strength Thin Steel Wires
J. Thimont et al.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)
Determining The Weld Quality In Extrusion Welding
Henry Valberg et al.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)
Studies of Porthole Extrusion through Die with Different Sizes of Portholes
Yawar Abbas Khan et al.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)
Simulation of Drawing of Small Stainless Steel Platinum Medical Tubes - Influence of the Tool Parameters on the Forming Limit
Camille Linardon et al.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)
INVESTIGATION OF THE INFLUENCE OF TOOL GEOMETRY ON EFFECTIVE STRAIN DISTRIBUTION IN FULL FORWARD EXTRUSION
Marion Merklein et al.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)
Hydrostatic Microextrusion of Steel and Copper
Guido Berti et al.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)
Finite Element Modelling of Complex Thin Profile Extrusion
N. Biba et al.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)
Characterization Of Flow Stress Of Different AA6082 Alloys By Means Of Hot Torsion Test
Lorenzo Donati et al.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)
Co-extrusion of Discontinuously, Non-centric Steel-reinforced Aluminum
A. Foydl et al.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)
Formability of Wrought Magnesium Alloys by Hot Compression Testing and Laboratory-Scale Extrusion
Q. Ge et al.
14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS (2011)
ON AN INNOVATIVE OPTIMIZATION APPROACH FOR THE DESIGN OF CROSS-SECTION PROFILES OF INTEGRALLY STIFFENED PANELS SUBJECTED TO ELASTO-PLASTIC BUCKLING DEFORMATION MODES
J. F. Caseiro et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
DEFORMATION CONDITIONS IN THE EXTRUSION WELD ZONE WHEN USING POINTED AND SQUARE ENDED BRIDGE
Y. A. Khan et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
DIRECT RECYCLING OF 1050 ALUMINUM ALLOY SCRAP MATERIAL MIXED WITH 6060 ALUMINUM ALLOY CHIPS BY HOT EXTRUSION
V. Gueley et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
USE OF A SHADOWING TONGUE TO REDUCE ELASTIC DIE DEFLECTIONS
I. Irgens et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
EVALUATION OF DIFFERENT FE SIMULATION CODES IN THE STRESS ANALYSIS OF EXTRUSION DIES
B. Reggiani et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
APPLICATION OF EQUAL CHANNEL ANGULAR PRESSING WITH PARALLEL CHANNELS FOR GRAIN REFINEMENT IN ALUMINIUM ALLOYS AND ITS EFFECT ON DEFORMATION BEHAVIOR
I. Sabirov et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
FE SIMULATION OF MICRO-EXTRUSION OF A CONICAL PIN
M. Rosochowska et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
MODELLING AND SIMULATION OF DYNAMIC MICROSTRUCTURE EVOLUTION OF ALUMINIUM ALLOYS DURING THERMOMECHANICALLY COUPLED EXTRUSION PROCESS
Farhad Parvizian et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
STUDY OF ISOTHERMAL EXTRUSION OF ALUMINUM USING FINITE ELEMENT SIMULATIONS
Amin Farjad Bastani et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
MAGNESIUM SHEET PRODUCTION BY USING THE EXTRUSION PROCESS
Sven Gall et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
COMPARISON OF DIFFERENT FEM CODE APPROACHES IN THE SIMULATION OF THE DIE DEFLECTION DURING ALUMINIUM EXTRUSION
L. Donati et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
METAL FLOW IN IDEALISED A-SYMMETRIC 2D EXTRUSION WELDING
Y. A. Khan et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
COMPARISON OF METAL FLOW IN UN-LUBRICATED DIRECT AND INDIRECT EXTRUSION OF ALUMINIUM ALLOYS
Henry Valberg
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
SIMULATION OF DISTORTION DUE TO NON-UNIFORM COOLING IN ALUMINIUM EXTRUSION PROCESS
S. Bikass et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
UNDERSTANDING METAL FLOW IN ALUMINIUM EXTRUSION BY MEANS OF EMPTYING DIAGRAMS
Henry Valberg
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2010)
SIMULATION OF METAL FLOW AND WELDING PREDICTION IN PORTHOLE DIE EXTRUSION: THE INFLUENCE OF THE GEOMETRICAL PARAMETERS
E. Ceretti et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
STRENGTH, DUCTILITY AND IMPACT TOUGHNESS OF THE MAGNESIUM ALLOY AZ31B AFTER EQUAL-CHANNEL ANGULAR PRESSING
Lothar W. Meyer et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
INFLUENCE OF COOLING RATE ON DISTORTION AND MICROSTRUCTURE IN EXTRUSION OF Al-Mg-Si ALLOYS
Andreas Jaeger et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
THERMO-MECHANICAL MODELLING OF INDIRECT EXTRUSION PROCESS FOR MAGNESIUM ALLOYS
S. Ertuerk et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
BOUNDARY CONDITIONS APPLIED ON BEARING CORNER IN DIRECT ALUMINUM EXTRUSION
W. Assaad et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
THE EFFECT OF POCKET SHAPE IN EXTRUSION DIES
L. Donati et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
NUMERICAL SIMULATION OF BURSTING IN EXTRUSION PROCESS USING FINITE VISCOPLASTICITY WITH DUCTILE DAMAGE AND THERMAL EFFECTS
C. Labergere et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
FE ANALYSIS AND EXPERIMENTAL INVESTIGATION OF COLD EXTRUSION BY SHAPED PUNCH
Miroslav Plancak et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
SIMULATION OF THE EXTRUSION OF HOLLOW PROFILES BY NATURAL ELEMENT METHODS
I. Alfaro et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
HYDROSTATIC EXTRUSION OF UFG ALUMINIUM
L. Olejnik et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
ANALYSIS OF SEMI-SOLID EXTRUSION PRODUCTS MADE OF STEEL ALLOY X210CRW12
F. Knauf et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
Process and die design for rod extrusion of γ iron
K. K. Pathak et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
JOINING OF METAL STREAMS IN EXTRUSION WELDING
Y. A. Khan et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
IMPROVEMENT OF MECHANICAL PROPERTIES OF AL (A356) CAST ALLOY PROCESSED BY ECAP WITH DIFFERENT HEAT TREATMENTS
M. Moradi et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
BACKWARD EXTRUSION USING MICRO-BLANKED ALUMINIUM SHEET
L. Olejnik et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2009)
Numerical flow front tracking for aluminium extrusion of a tube and a comparison with experiments
A. J. Koopman et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
Preliminary examination of the fracture surfaces of a cold working die
D. Statharas et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
Micro-extrusion of ultrafine grained copper
S. Geissdoerfer et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
An investigation into the backward extrusion of thin walled cans
K. Abrinia et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
Measurement of friction in a cold extrusion operation: Study by numerical simulation of four friction tests
Q. Zhang et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
Comparison of experimental and Finite Element Modelling of the extrusion of AA6082 on both tools and extrudate as a function of process parameters
F. Krumphals et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
Finite element analysis of double layers alloy wire drawing processes
Dyi-Cheng Chen et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
Modelling and Simulation of Extrusion of Magnesium Alloys
S. Ertuerk et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
Shears, Vortices, and Mixing During Twist Extrusion
Y. Beygelzimer et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
分享论文
