相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Sustainable non-isocyanate polyurethanes bio-adhesives for engineered wood panels are revealed as promising candidates to move from formaldehyde-based alternatives
Ana Arias et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)
Characteristics of beech bark and its effect on properties of UF adhesive and on bonding strength and formaldehyde emission of plywood panels
Pavlo Bekhta et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2021)
Bio-Based Polyurethane Resins Derived from Tannin: Source, Synthesis, Characterisation, and Application
Manggar Arum Aristri et al.
FORESTS (2021)
Developing High-Performance Cellulose-Based Wood Adhesive with a Cross-Linked Network
Sichen Liu et al.
ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)
Effect of Grape Seed and Skin Tannin Molecular Mass and Composition on the Rate of Reaction with Anthocyanin and Subsequent Formation of Polymeric Pigments in the Presence of Acetaldehyde
Bo Teng et al.
JOURNAL OF AGRICULTURAL AND FOOD CHEMISTRY (2019)
Study of Gliding Arc Plasma Treatment for Bamboo-Culm Surface Modification
Bin Li et al.
FORESTS (2019)
Renewable natural resources as green alternative substrates to obtain bio-based non-isocyanate polyurethanes-review
Kamila Blazek et al.
CRITICAL REVIEWS IN ENVIRONMENTAL SCIENCE AND TECHNOLOGY (2019)
Structural Properties and Copolycondensation Mechanism of Valonea Tannin-Modified Phenol-formaldehyde Resin
Cheng Li et al.
JOURNAL OF POLYMERS AND THE ENVIRONMENT (2018)
Tannic acid derived non-isocyanate polyurethane networks: Synthesis, curing kinetics, antioxidizing activity and cell viability
N. Esmaeili et al.
THERMOCHIMICA ACTA (2018)
Characterization of the Low Molar Ratio Urea-Formaldehyde Resin with 13C NMR and ESI-MS: Negative Effects of the Post-Added Urea on the Urea-Formaldehyde Polymers
Hui Wang et al.
POLYMERS (2018)
Extraction and optimization of tannin from the flower of Musa sp. applied to the treatment of iron ore dump
Washington Luis Moreira Braga et al.
JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2018)
Eco-Friendly Phenol-Urea-Formaldehyde Co-condensed Resin Adhesives Accelerated by Resorcinol for Plywood Manufacturing
Bo Pang et al.
ACS OMEGA (2018)
Modification of urea-formaldehyde resin adhesives with blocked isocyanates using sodium bisulfite
Muhammad Adly Rahandi Lubis et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2017)
EFFECTS OF PLASMA SURFACE TREATMENT ON BENDING STRENGTH AND MODULUS OF ELASTICITY OF BEECH AND POPLAR PLYWOOD
Cenk Demirkir et al.
MADERAS-CIENCIA Y TECNOLOGIA (2017)
Tannin-Based Copolymer Resins: Synthesis and Characterization by Solid State 13C NMR and FT-IR Spectroscopy
Gianluca Tondi
POLYMERS (2017)
Effect of Plasma Processing Rate on Poplar Veneer Surface and its Application in Plywood
Minzhi Chen et al.
BioResources (2016)
Development of an industrial applicable dielectric barrier discharge (DBD) plasma treatment for improving bondability of poplar veneer
Minzhi Chen et al.
HOLZFORSCHUNG (2016)
Preparation and characterization of a novel environmentally friendly phenol-formaldehyde adhesive modified with tannin and urea
Cheng Li et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2016)
Chemical modification of tannins to elaborate aromatic biobased macromolecular architectures
Alice Arbenz et al.
GREEN CHEMISTRY (2015)
Surface modification of poplar veneer by means of radio frequency oxygen plasma (RF-OP) to improve interfacial adhesion with urea-formaldehyde resin
Lijuan Tang et al.
HOLZFORSCHUNG (2015)
Phenol-urea-formaldehyde resin co-polymer synthesis and its influence on Elaeis palm trunk plywood mechanical performance evaluated by 13C NMR and MALDI-TOF mass spectrometry
Yeoh Beng Hoong et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2015)
Surface Characterization of Plasma-modified Poplar Veneer: Dynamic Wettability
Lijuan Tang et al.
BioResources (2015)
Properties of Liquid and Polycondensed UF Resin Modified with pMDI
Dorota Dziurka et al.
DRVNA INDUSTRIJA (2014)
Performances of Larch (larix gmelini) Tannin Modified Urea-Formaldehyde (TUF) Resin and Plywood Bonded by TUF Resin
Jizhi Zhang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2014)
Assessment of the chemical changes during storage of phenol-formaldehyde resins pyrolysis gas chromatography mass spectrometry, inverse gas chromatography and Fourier transform infra red methods
B. Strzemiecka et al.
JOURNAL OF CHROMATOGRAPHY A (2014)
Bark extractives-based phenol-formaldehyde resins from beetle-infested lodgepole pine
Yong Zhao et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2013)
The efficiency of tannin as a formaldehyde scavenger chemical in medium density fiberboard
Sevda Boran et al.
COMPOSITES PART B-ENGINEERING (2012)
Adhesion phenomena in bonded joints
A. Baldan
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2012)
Decreasing formaldehyde emission from medium density fiberboard panels produced by adding different amine compounds to urea formaldehyde resin
S. Boran et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2011)
Thermal behavior of modified urea-formaldehyde resins
Suzana Samarzija-Jovanovic et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2011)
Development and optimization of a new formaldehyde-free cornstarch and tannin wood adhesive
A. Moubarik et al.
EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS (2010)
Cornstarch and tannin in phenol-formaldehyde resins for plywood production
Amine Moubarik et al.
INDUSTRIAL CROPS AND PRODUCTS (2009)
13C-NMR Study on the Structure of Phenol-Urea-Formaldehyde Resins Prepared by Methylolureas and Phenol
Dongbin Fan et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Urea-formaldehyde resins characterized by thermal analysis and FTIR method
T. Zorba et al.
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2008)
Lignin-based polycondensation resins for wood adhesives
N. -E. El Mansouri et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Dependance on the adhesive formulation of the upgrading of MUF particleboard adhesives and decrease of melamine content by buffer and additives
M Zanetti et al.
HOLZ ALS ROH-UND WERKSTOFF (2004)
Reactivity, chemical structure, and molecular mobility of urea-formaldehyde adhesives synthesized under different conditions using FTIR and solid-state 13C CP/MAS NMR Spectroscopy
BD Park et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2003)