相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Low residual stress C/C composite-titanium alloy joints brazed by foam interlayer
Wei Guo et al.
CERAMICS INTERNATIONAL (2022)
Carbon fiber reinforced poly(ether ether ketone) rivets for fastening composite structures
Christophe Absi et al.
COMPOSITE STRUCTURES (2022)
A simple and effective resin pre-coating treatment on grinded, acid pickled and anodised substrates for stronger adhesive bonding between Ti-6Al-4V titanium alloy and CFRP
Yunsen Hu et al.
SURFACE & COATINGS TECHNOLOGY (2022)
Tensile properties analysis of CFRP-titanium plate multi-bolt hybrid joints
Yanping Zheng et al.
CHINESE JOURNAL OF AERONAUTICS (2022)
Effects of laser hybrid interfacial pretreatment on enhancing the carbon fiber reinforced thermosetting composites and TC4 alloy heterogeneous joint
Qi Zou et al.
MATERIALS TODAY COMMUNICATIONS (2022)
Laser joining of CFRTP to titanium alloy via laser surface texturing
Caiwang Tan et al.
CHINESE JOURNAL OF AERONAUTICS (2021)
Bio-inspired patterned adhesive single-lap joints for CFRP and titanium
Isaiah Kaiser et al.
COMPOSITES PART B-ENGINEERING (2021)
Carbon fiber reinforced thermoplastic composites and TC4 alloy laser assisted joining with the metal surface laser plastic-covered method
Junke Jiao et al.
COMPOSITES PART B-ENGINEERING (2021)
A new strengthening process of thermoplastic polypropylene reinforced by interlayered activated sizing film-free carbon fiber treated by electron beam irradiation under oxygen-rich nitrogen gas prior to assembly and hot-press
Shodai Kitagawa et al.
JOURNAL OF COMPOSITE MATERIALS (2021)
Effect of laser texturing on mechanical strength and microstructural properties of hot-pressing joining of carbon fiber reinforced plastic to Ti6Al4V
Yifan Liu et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
The effect of MWCNTs with different diameters on the interface properties of Ti/CFRP fiber metal laminates
Hao Wang et al.
COMPOSITE STRUCTURES (2021)
Properties and applications of FRP cable on long-span cable-supported bridges: A review
Yaqiang Yang et al.
COMPOSITES PART B-ENGINEERING (2020)
Enhanced resistance-welding hybrid joints of titanium alloy/thermoplastic composites using a carbon-nanotube lamina
Xuhai Xiong et al.
DIAMOND AND RELATED MATERIALS (2020)
Damage behavior investigation of CFRP/Ti bolted joint during interference fit bolt dynamic installation progress
Yangjie Zuo et al.
ENGINEERING FAILURE ANALYSIS (2020)
Investigation of shear failure load in ultrasonic additive manufacturing of 3D CFRP/Ti structures
Sagil James et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Influence of defocus distance on laser joining of CFRP to titanium alloy
Jianhui Su et al.
OPTICS AND LASER TECHNOLOGY (2020)
Life cycle cost analysis of FRP cables for long-span cable supported bridges
Yaqiang Yang et al.
STRUCTURES (2020)
Effect of scanning speed on laser joining of carbon fiber reinforced PEEK to titanium alloy
Caiwang Tan et al.
OPTICS AND LASER TECHNOLOGY (2020)
Reduction of Stress Concentration Factor (SCF) on the Bolted Joint Connection for a Large Wind Turbine Rotor Blade through Various Design Modifications
Kwangtae Ha
APPLIED SCIENCES-BASEL (2020)
A Novel Joint of 18-8 Stainless Steel and Aluminum by Partial Welding Process to Ni-Plated Carbon Fiber Junction
Masataka Tomizawa et al.
MATERIALS TRANSACTIONS (2020)
Fatigue life assessment of FRP cable for long-span cable-stayed bridge
Bo Feng et al.
COMPOSITE STRUCTURES (2019)
Tension-tension fatigue performance of a large-diameter pultruded carbon/glass hybrid rod
Chenggao Li et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
A New Process of Thermoplastic Polypropylene Reinforced by Interlayered Activated Carbon Fiber Treated by Electron Beam Irradiation under Nitrogen Gas Atmosphere with Oxygen Prior to Assembly and Hot-Press
Shodai Kitagawa et al.
MATERIALS TRANSACTIONS (2019)
Evaluation of insert design on the performance of repaired composite-Ti alloy joints
Yun-tao Zhu et al.
COMPOSITE STRUCTURES (2019)
Interface strengthening mechanisms of Ti/CFRP fiber metal laminate after adding MWCNTs to resin matrix
Kai Jin et al.
COMPOSITES PART B-ENGINEERING (2019)
Joint formation and fracture characteristics of laser welded CFRP/TC4 joints
Wang Tao et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Induction-based joining of titanium with thermoplastics Creation and examination of titanium-thermoplastic connections
Florian P. Lugauer et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2019)
Numerical and experimental investigation of fitting tolerance effects on damage and failure of CFRP/Ti double-lap single-bolt joints
Yuejie Cao et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2018)
Dynamic behavior of CFRP/Ti single-lap pinned joints under longitudinal electromagnetic dynamic loading
Yangjie Zuo et al.
COMPOSITE STRUCTURES (2018)
Increasing Charpy Impact Value of Polycarbonate (PC) Sheets Irradiated by Electron Beam
Yoshitake Nishi et al.
MATERIALS TRANSACTIONS (2018)
Enhanced Tensile Strength of Titanium/Polycarbonate Joint Connected by Electron Beam Activated Cross-Weave Carbon Fiber Cloth Insert
Hitoki Hasegawa et al.
MATERIALS TRANSACTIONS (2017)
Durability study on interlaminar shear behaviour of basalt-, glass- and carbon-fibre reinforced polymer (B/G/CFRP) bars in seawater sea sand concrete environment
Zike Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Tensile Strength of a Ti/Thermoplastic ABS Matrix CFRTP Joint Connected by Surface Activated Carbon Fiber Cross-Weave Irradiated by Electron Beam
Hitoki Hasegawa et al.
MATERIALS TRANSACTIONS (2016)
Assessment of alternative joining techniques for Ti-6Al-4V/CFRP hybrid joints regarding tensile and fatigue strength
Nikolai Kashaev et al.
MATERIALS & DESIGN (2015)
Tensile Shear Strength Improvement of 18-8 Stainless Steel/CFRP Joint Irradiated by Electron Beam Prior to Lamination Assembly and Hot-Pressing
Akiko Minegishi et al.
MATERIALS TRANSACTIONS (2015)
Carbon fiber surfaces and composite interphases
Mohit Sharma et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Effect of the friction riveting process parameters on the joint formation and performance of Ti alloy/short-fibre reinforced polyether ether ketone joints
J. Altmeyer et al.
MATERIALS & DESIGN (2014)
Impact Value of CFRP/Ti Joint Reinforced by Nickel Coated Carbon Fiber
Yoshitake Nishi et al.
MATERIALS TRANSACTIONS (2014)
High Adhesive Force between Laminated Sheets of Copper and Polyurethane Improved by Homogeneous Low Energy Electron Beam Irradiation (HLEBI) Prior to Hot-Press
Masato Uyama et al.
MATERIALS TRANSACTIONS (2014)
Creation of Adhesive Force between Laminated Sheets of Aluminum and Polyurethane by Homogeneous Low Energy Electron Beam Irradiation Prior to Hot-Press
Masae Kanda et al.
MATERIALS TRANSACTIONS (2013)
Effects of Electron Beam Irradiation on Charpy Impact Value of Short Glass Fiber (GFRP) Samples with Random Distribution of Solidification Texture Angles from Zero to 90 Degrees
Michael C. Faudree et al.
MATERIALS TRANSACTIONS (2012)
Effects of Electron Beam Irradiation on Adhesive Force of Laminated Sheet of High Strength Polytetrafluoroethylene (PTFE) and Bio-Adaptable Polydimethylsiloxane (PDMS)
Yoshitake Nishi et al.
MATERIALS TRANSACTIONS (2012)
Wetting dynamics versus interfacial reactivity of AlSi alloys on carbon
N. R. Calderon et al.
JOURNAL OF MATERIALS SCIENCE (2010)
Effects of homogeneous irradiation of electron beam with low potential on adhesive strength of polymethyl methacrylate composite sheet covered with nylon-6 film
Yoshitake Nishi et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Improving performance of GFRP/aluminum single lap joints using bolted/co-cured hybrid method
Ryosuke Matsuzaki et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Thermodynamic description of the Ti-O system using the associate model for the liquid phase
M. Cancarevic et al.
CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY (2007)
Effects of electron beam irradiation on charpy impact value of GFRP
Yoshitake Nishi et al.
MATERIALS TRANSACTIONS (2007)
Numerical prediction of the thrust force responsible of delamination during the drilling of the long-fibre composite structures
Redouane Zitoune et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Estimation of polymer-surface interfacial interaction strength by a contact AFM technique
H. Dvir et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2006)
Influences of electron beam irradaiton on misting and related surface condition on sapphire lens
Kazuya Oguri et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2006)
Roles of acidic functional groups of carbon fiber surfaces in enhancing interfacial adhesion behavior
SJ Park et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Critical implant length of carbon fiber in transparent adhesive polymer for tensile fracture test
H Kobayashi et al.
JOURNAL OF THE JAPAN INSTITUTE OF METALS (2005)
Experimental study of drilling glass fiber reinforced plastics (GFRP) manufactured by hand lay-up
JP Davim et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Influences of electron beam irradiation on misting for transparent polycarbonate resin
K Oguri et al.
JOURNAL OF THE JAPAN INSTITUTE OF METALS (2004)
Improved strength in carbon fiber reinforced plastics due after electron beam irradiation
A Mizutani et al.
MATERIALS TRANSACTIONS (2003)
At forty cometh understanding - A review of some basics of adhesion over the past four decades
KW Allen
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2003)
Misting-free diamond surface created by sheet electron beam irradiation
K Oguri et al.
JOURNAL OF MATERIALS RESEARCH (2001)
The Ti-Co-C system (titanium-cobalt-carbon)
D Bandyopadhyay et al.
JOURNAL OF PHASE EQUILIBRIA (2000)
Mechanical, surface and interfacial characterisation of pitch and PAN-based carbon fibres
MC Paiva et al.
CARBON (2000)
分享论文
