相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Failure mechanisms of wind turbine blades in India: Climatic, regional, and seasonal variability
Kadhirvel Boopathi et al.
WIND ENERGY (2022)
Structural repair of wind turbine blades: Computational model for the evaluation of the effect of adhesive properties
Lennart Mischnaewski et al.
WIND ENERGY (2021)
Fatigue testing of a 14.3 m composite blade embedded with artificial defects - Damage growth and structural health monitoring
Xiao Chen et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2021)
Rain erosion of wind turbine blades and the effect of air bubbles in the coatings
Soren Faester et al.
WIND ENERGY (2021)
Sustainable End-of-Life Management of Wind Turbine Blades: Overview of Current and Coming Solutions
Leon Mishnaevsky
MATERIALS (2021)
Leading edge erosion of wind turbine blades: Understanding, prevention and protection
Leon Mishnaevsky et al.
RENEWABLE ENERGY (2021)
Nanoengineered Graphene-Reinforced Coating for Leading Edge Protection of Wind Turbine Blades
Nicolai Frost-Jensen Johansen et al.
COATINGS (2021)
Rain erosion of wind turbine blades: computational analysis of parameters controlling the surface degradation
Saeed Doagou-Rad et al.
MECCANICA (2020)
Micromechanisms of leading edge erosion of wind turbine blades: X-ray tomography analysis and computational studies
Leon Mishnaevsky et al.
WIND ENERGY (2020)
Leading edge erosion of wind turbine blades: Multiaxial critical plane fatigue model of coating degradation under random liquid impacts
Saeed Doagou-Rad et al.
WIND ENERGY (2020)
Structural integrity analysis and damage assessment of a long composite wind turbine blade under extreme loading
Himayat Ullah et al.
COMPOSITE STRUCTURES (2020)
Costs of repair of wind turbine blades: Influence of technology aspects
Jr Leon Mishnaevsky et al.
WIND ENERGY (2020)
Study on the Effect of Different Delamination Defects on Buckling Behavior of Spar Cap in Wind Turbine Blade
Jianwei Li et al.
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2020)
Damage Mechanism Based Approach to the Structural Health Monitoring of Wind Turbine Blades
Malcolm McGugan et al.
COATINGS (2020)
On the potential of particle engineered anti-erosion coatings for leading edge protection of wind turbine blades: Computational studies
K. M. Jespersen et al.
41ST RISO INTERNATIONAL SYMPOSIUM ON MATERIALS SCIENCE: MATERIALS AND DESIGN FOR NEXT GENERATION WIND TURBINE BLADES (2020)
Repair of wind turbine blades: Review of methods and related computational mechanics problems
Leon Mishnaevsky
RENEWABLE ENERGY (2019)
Understanding progressive failure mechanisms of a wind turbine blade trailing edge section through subcomponent tests and nonlinear FE analysis
Xiao Chen et al.
COMPOSITE STRUCTURES (2019)
Parametric study of the effect of wrinkle features on the strength of a tapered wind turbine blade sub-structure
J. J. Bender et al.
COMPOSITE STRUCTURES (2019)
Toolbox for optimizing anti-erosion protective coatings of wind turbine blades: Overview of mechanisms and technical solutions
Leon Mishnaevsky
WIND ENERGY (2019)
Structural failure test of a 52.5 m wind turbine blade under combined loading
Lei'an Zhang et al.
ENGINEERING FAILURE ANALYSIS (2019)
Effects of different material failures and surface contact on structural response of trailing edge sections in composite wind turbine blades
Xiao Chen et al.
COMPOSITE STRUCTURES (2019)
Numerical simulation of a resistant structural bonding in wind-turbine blade through the use of composite cord stitching
Venkadesh Raman et al.
COMPOSITES PART B-ENGINEERING (2019)
Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performance
Mahoor Mehdikhani et al.
JOURNAL OF COMPOSITE MATERIALS (2019)
Indentation based strength analysis of adhesively bonded leading-edge composite joints in wind turbine blades
M. G. Droubi et al.
SN APPLIED SCIENCES (2019)
Experimental investigation on ultimate strength and failure response of composite box beams used in wind turbine blades
Jing Tang et al.
COMPOSITE STRUCTURES (2018)
Structural gradient based sizing optimization of wind turbine blades with fixed outer geometry
J. H. Sjolund et al.
COMPOSITE STRUCTURES (2018)
Tunneling cracks in full scale wind turbine blade joints
Jeppe B. Jorgensen et al.
ENGINEERING FRACTURE MECHANICS (2018)
Lifetime extension of onshore wind turbines: A review covering Germany, Spain, Denmark, and the UK
Lisa Ziegler et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)
Fracture of wind turbine blades in operationPart I: A comprehensive forensic investigation
Xiao Chen
WIND ENERGY (2018)
Wind turbine blade trailing edge failure assessment with sub-component test on static and fatigue load conditions
F. Lahuerta et al.
COMPOSITE STRUCTURES (2018)
A new thickness parameterization for Discrete Material and Thickness Optimization
J. H. Sjolund et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)
Extending the life of wind turbine blade leading edges by reducing the tip speed during extreme precipitation events
Jakob Ilsted Bech et al.
WIND ENERGY SCIENCE (2018)
A computational framework for the analysis of rain-induced erosion in wind turbine blades, part I: Stochastic rain texture model and drop impact simulations
B. Amirzadeh et al.
JOURNAL OF WIND ENGINEERING AND INDUSTRIAL AERODYNAMICS (2017)
Effects of defects in composite wind turbine blades Part 1 : Characterization and mechanical testing
Jared W. Nelson et al.
WIND ENERGY SCIENCE (2017)
Effects of defects in composite wind turbine blades - Part 2: Progressive damage modeling of fiberglass-reinforced epoxy composites with manufacturing-induced waves
Jared W. Nelson et al.
WIND ENERGY SCIENCE (2017)
Materials for Wind Turbine Blades: An Overview
Leon Mishnaevsky et al.
MATERIALS (2017)
Full-Scale Fatigue Testing of a Wind Turbine Blade in Flapwise Direction and Examining the Effect of Crack Propagation on the Blade Performance
Othman Al-Khudairi et al.
MATERIALS (2017)
Experimental investigation on structural collapse of a large composite wind turbine blade under combined bending and torsion
Xiao Chen
COMPOSITE STRUCTURES (2017)
Failure rate, repair time and unscheduled O&M cost analysis of offshore wind turbines
James Carroll et al.
WIND ENERGY (2016)
Static test until structural collapse after fatigue testing of a full-scale wind turbine blade
Hak Gu Lee et al.
COMPOSITE STRUCTURES (2016)
Numerical simulation analysis as a tool to identify areas of weakness in a turbine wind-blade and solutions for their reinforcement
Venkadesh Raman et al.
COMPOSITES PART B-ENGINEERING (2016)
Initiation of trailing edge failure in full-scale wind turbine blade test
Philipp Ulrich Haselbach et al.
ENGINEERING FRACTURE MECHANICS (2016)
Mechanical behaviour of thick structural adhesives in wind turbine blades under multi-axial loading
Dimitrios Zarouchas et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2016)
The effect of delaminations on local buckling in wind turbine blades
P. U. Haselbach et al.
RENEWABLE ENERGY (2016)
A comprehensive investigation of trailing edge damage in a wind turbine rotor blade
Philipp Ulrich Haselbach et al.
WIND ENERGY (2016)
Local fatigue behavior in tapered areas of large offshore wind turbine blades
Seyed Aydin Raeis Hosseiny et al.
37th Riso International Symposium on Materials Science (2016)
Macro and meso-scale study in composite lay-up orientation effect on adhesive material used in wind turbine blades
Venkadesh Raman et al.
REVUE DES COMPOSITES ET DES MATERIAUX AVANCES-JOURNAL OF COMPOSITE AND ADVANCED MATERIALS (2016)
Progressive debonding analysis of composite blade root joint of wind turbines under fatigue loading
H. Hosseini-Toudeshky et al.
COMPOSITE STRUCTURES (2015)
Fatigue failure of a composite wind turbine blade at its root end
Hak Gu Lee et al.
COMPOSITE STRUCTURES (2015)
Effects of geometric non-linearity on energy release rates in a realistic wind turbine blade cross section
M. A. Eder et al.
COMPOSITE STRUCTURES (2015)
To improve failure resistance in joint design of composite wind turbine blade materials
O. Al-Khudairi et al.
RENEWABLE ENERGY (2015)
Leading edge erosion of coated wind turbine blades: Review of coating life models
H. M. Slot et al.
RENEWABLE ENERGY (2015)
A review of damage detection methods for wind turbine blades
Dongsheng Li et al.
SMART MATERIALS AND STRUCTURES (2015)
Composite Repair in Wind Turbine Blades: An Overview
K. B. Katnam et al.
JOURNAL OF ADHESION (2015)
Fracture analysis of adhesive joints in wind turbine blades
M. A. Eder et al.
WIND ENERGY (2015)
Failure Test and Finite Element Simulation of a Large Wind Turbine Composite Blade under Static Loading
Xiao Chen et al.
ENERGIES (2014)
Preliminary failure investigation of a 52.3 m glass/epoxy composite wind turbine blade
Xiao Chen et al.
ENGINEERING FAILURE ANALYSIS (2014)
Mechanical characterization and damage assessment of thick adhesives for wind turbine blades using acoustic emission and digital image correlation techniques
Dimitrios Zarouchas et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2014)
Fracture mechanics approach for failure of adhesive joints in wind turbine blades
Y. M. Ji et al.
RENEWABLE ENERGY (2014)
A practical approach to fracture analysis at the trailing edge of wind turbine rotor blades
M. A. Eder et al.
WIND ENERGY (2014)
Effects of composite fiber orientation on wind turbine blade buckling resistance
Kevin Cox et al.
WIND ENERGY (2014)
A concept study of a carbon spar cap design for a 80m wind turbine blade
M. Rosemeier et al.
SCIENCE OF MAKING TORQUE FROM WIND 2014 (TORQUE 2014) (2014)
Structural investigation of composite wind turbine blade considering structural collapse in full-scale static tests
Jinshui Yang et al.
COMPOSITE STRUCTURES (2013)
Elastic-plastic analysis and strength evaluation of adhesive joints in wind turbine blades
Yi Hua et al.
COMPOSITES PART B-ENGINEERING (2013)
Damages of wind turbine blade trailing edge: Forms, location, and root causes
Sabbah Ataya et al.
ENGINEERING FAILURE ANALYSIS (2013)
Structural efficiency of a wind turbine blade
Neil Buckney et al.
THIN-WALLED STRUCTURES (2013)
On the structural topology of wind turbine blades
Neil Buckney et al.
WIND ENERGY (2013)
Investigation of failure mechanisms in GFRP sandwich structures with face sheet wrinkle defects used for wind turbine blades
Martin Leong et al.
COMPOSITE STRUCTURES (2012)
Multi-material topology optimization of laminated composite beam cross sections
Jose Pedro Blasques et al.
COMPOSITE STRUCTURES (2012)
Investigations on the mechanical behavior of a wind rotor blade subcomponent
D. S. Zarouchas et al.
COMPOSITES PART B-ENGINEERING (2012)
Investigation of structural bond lines in wind turbine blades by sub-component tests
Florian Sayer et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2012)
Defect distribution and reliability assessment of wind turbine blades
Henrik Stensgaard Toft et al.
ENGINEERING STRUCTURES (2011)
Tensile strength of two-part epoxy paste adhesives: Influence of mixing technique and micro-void formation
K. B. Katnam et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2011)
A review of finite element analysis of adhesively bonded joints
Xiaocong He
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2011)
Post-buckling failure in multi-delaminated composite wind turbine blade materials
H. Ghasemnejad et al.
MATERIALS & DESIGN (2011)
Investigating the impact of non-linear geometrical effects on wind turbine blades-Part 1: Current status of design and test methods and future challenges in design optimization
Find M. Jensen et al.
WIND ENERGY (2011)
Structural collapse of a wind turbine blade. Part A: Static test and equivalent single layered models
L. C. T. Overgaard et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Structural collapse of a wind turbine blade. Part B: Progressive interlaminar failure models
L. C. T. Overgaard et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Statistical modelling of compression and fatigue damage of unidirectional fiber reinforced composites
Leon Mishnaevsky et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Study of fatigue damage in wind turbine blades
J. C. Marin et al.
ENGINEERING FAILURE ANALYSIS (2009)
Strength scaling of adhesive joints in polymer-matrix composites
Bent F. Sorensen et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
Sandwich Materials for Wind Turbine Blades - Present and Future
Ole Thybo Thomsen
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2009)
Study of damage and repair of blades of a 300kW wind turbine
J. C. Marin et al.
ENERGY (2008)
Delamination at thick ply drops in carbon and glass fiber laminates under fatigue loading
Daniel D. Samborsky et al.
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Application and analysis of sandwich elements in the primary structure of large wind turbine blades
C. Berggreen et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2007)
The effect of face sheet wrinkle defects on the strength of FRP sandwich structures
Brian Hayman et al.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2007)
Structural testing and numerical simulation of a 34 m composite wind turbine blade
F. M. Jensen et al.
COMPOSITE STRUCTURES (2006)
Simulation of fatigue failure in a full composite wind turbine blade
MM Shokrieh et al.
COMPOSITE STRUCTURES (2006)
Suppression of delamination at ply drops in tapered composites by ply chamfering
B Khan et al.
JOURNAL OF COMPOSITE MATERIALS (2006)
The study of tapered laminated composite structures: a review
K He et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2000)
分享论文
