☆ 4.7 Article

Lubrication-enhanced mechanisms of titanium alloy grinding using lecithin biolubricant

TRIBOLOGY INTERNATIONAL (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Engineering, Mechanical

Biological Stability of Water-Based Cutting Fluids: Progress and Application

Lizhi Tang et al.

Summary: The use of cutting fluid in engineering manufacturing is crucial for processing efficiency and surface quality. However, the long-term recycling of water-based cutting fluid can lead to deterioration and breeding of bacteria, causing failures and increased costs. This article discusses the mechanisms of action of additives and microbial metabolites, the denaturation mechanisms and efficiency of traditional bactericides, the disruption of cell membranes by nanomaterials, and the destruction of bacterial genetic material by ultraviolet rays and ozone. The evaluation of various sterilization methods provides insights into improving the biological stability of cutting fluid.

CHINESE JOURNAL OF MECHANICAL ENGINEERING (2022)

添加到收藏夹

Article Automation & Control Systems

Atmospheric pressure cold plasma jet-assisted micro-milling TC4 titanium alloy

Jiyu Liu et al.

Summary: The study suggests using atmospheric pressure plasma jet to improve machinability and surface quality of TC4 titanium alloy. Experimental results show that plasma jet can promote material fracture, reduce cutting force and cutting temperature, resulting in better surface quality.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Mechanical

Comparison of machining performance under MQL and ultra-high voltage EMQL conditions based on tribological properties

Prassan Shah et al.

Summary: This study compares a newly developed ultra-high voltage electrostatic minimum quantity lubrication (EMQL) technique with traditional MQL technique in turning processes of 15-5 PHSS, examining the tribological performance, surface roughness, and tool wear under different voltages to determine the optimal electrostatic voltage for improved performance.

TRIBOLOGY INTERNATIONAL (2021)

添加到收藏夹

Article Engineering, Manufacturing

Hybrid ultrasonic vibration and magnetic field assisted diamond cutting of titanium alloys

W. S. Yip et al.

Summary: By introducing a magnetic field into ultrasonic assisted diamond cutting, the surface damages caused by ultrasonic tool movements are significantly reduced, resulting in improved surface finishing of machined titanium alloys. The errors in groove depth and width are considerably reduced with the presence of a magnetic field, minimizing the drawbacks of ultrasonic vibration assistance.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Review Engineering, Manufacturing

Water-based nanosuspensions: Formulation, tribological property, lubrication mechanism, and applications

Shuiquan Huang et al.

Summary: Water-based nanosuspensions with nanoparticles as additives have been developed to replace oil-based lubricants for green manufacturing. Optimizing the formulation of nanosuspensions can enhance their performance and reduce manufacturing costs. Different types of nanosuspensions have specific advantages in various manufacturing processes, showing great potential for improving productivity.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Semiempirical heat flux model of hard-brittle bone material in ductile microgrinding

Min Yang et al.

Summary: A semiempirical heat flux theoretical model based on the dynamic grinding force of hard-brittle bone ductile microgrinding is proposed to solve the calculation error problem in bone microgrinding temperature field. Experimental results show high consistency between theoretical calculations and actual measurements, with an average error of less than 7.7%. This model allows for precise control of temperature distribution during hard-brittle bone microgrinding processes through mechanical processing theory.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Industrial

Mechanical performance of 316 L stainless steel by hybrid directed energy deposition and thermal milling process

Yuying Yang et al.

Summary: A novel hybrid approach combining DED and thermal milling is developed for producing complex structural parts with ideal dimensional accuracy. The research findings show that 316L SS specimens exhibit high microhardness and tensile strength under optimal process parameters. The tensile strength values obtained from the hybrid DED and thermal milling process are significantly higher than those from other manufacturing methods.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

Predictive model of convective heat transfer coefficient in bone micro-grinding using nanofluid aerosol cooling

Min Yang et al.

Summary: The study investigates the convective heat transfer characteristics and measurement methods of nanofluid aerosol cooling, establishing a theoretical model for the convective heat transfer coefficient and proposing a new measurement device to validate the theoretical model.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Review Automation & Control Systems

Circulating purification of cutting fluid: an overview

Xifeng Wu et al.

Summary: This study clarifies key scientific issues in the research achievements of eco-friendly cutting fluid and waste fluid treatment, providing scientific technical guidance for actual production. It summarizes the preparation and mechanism of organic additives, analyzes the influence of vegetable base oils on lubricating properties, and evaluates the process characteristics of cutting fluid reduction supply methods. Additionally, it outlines the treatment of oil mist and miscellaneous oil, the removal mechanism of microorganisms, and the design principles of integrated recycling equipment.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Review Engineering, Mechanical

Cryogenic minimum quantity lubrication machining: from mechanism to application

Mingzheng Liu et al.

Summary: The article discusses the role of cutting fluid in metal cutting and the environmental issues associated with traditional flood machining. It then explores the limitations of alternative technologies such as MQL and cryogenic cooling, and the potential of combining the two in CMQL technology. The benefits, mechanisms, and application prospects of CMQL are systematically analyzed, showing its superiority over cryogenic or MQL alone.

FRONTIERS OF MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Grindability of carbon fiber reinforced polymer using CNT biological lubricant

Teng Gao et al.

Summary: This study explored the application of CNT biological lubricant MQL in CFRP grinding through experiments, showing excellent friction characteristics and wear resistance. It significantly reduces grinding force and energy consumption, while preventing surface roughness increase and wheel clogging.

SCIENTIFIC REPORTS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Surface morphology evaluation of multi-angle 2D ultrasonic vibration integrated with nanofluid minimum quantity lubrication grinding

Teng Gao et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Engineering, Industrial

Effects of high-pressure coolant on cutting performance of high-speed ultrasonic vibration cutting titanium alloy

Zhenghui Lu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Mechanical

Surface engineering of a titanium alloy for tribological applications by nanosecond-pulsed laser

Daniel Kuemmel et al.

TRIBOLOGY INTERNATIONAL (2020)

添加到收藏夹

Review Engineering, Manufacturing

Vegetable oil-based nanofluid minimum quantity lubrication turning: Academic review and perspectives

Xiaoming Wang et al.

JOURNAL OF MANUFACTURING PROCESSES (2020)

添加到收藏夹

Article Automation & Control Systems

Effect of friction coefficient on chip thickness models in ductile-regime grinding of zirconia ceramics

Min Yang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Mechanical

Dispersing mechanism and tribological performance of vegetable oil-based CNT nanofluids with different surfactants

Teng Gao et al.

TRIBOLOGY INTERNATIONAL (2019)

添加到收藏夹

Article Automation & Control Systems

Enhanced machining performance and lubrication mechanism of electrostatic minimum quantity lubrication-EMQL milling process

Shuiquan Huang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Energy & Fuels

A novel strategy of periodic dosing of soy-lecithin as additive during long term test of diesel engine fueled with straight vegetable oil

Pinkesh R. Shah et al.

FUEL (2018)

添加到收藏夹

Article Pharmacology & Pharmacy

Preparation of sustained release capsules by electrostatic dry powder coating, using traditional dip coating as reference

Yan Yang et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental evaluation of the lubrication performance of mixtures of castor oil with other vegetable oils in MQL grinding of nickel-based alloy

Shuming Guo et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Meeting Abstract Chemistry, Multidisciplinary

Synthesis of thermal copolymer PVCL-PEGMA and its application of electrostatic spin fiber as carrier of skin antibiotic

Jing Peng et al.

JOURNAL OF CONTROLLED RELEASE (2017)

添加到收藏夹

Article Engineering, Mechanical

Surface roughness measurements in NFMQL assisted turning of titanium alloys: An optimization approach

Munish K. Gupta et al.

FRICTION (2017)

添加到收藏夹

Article Engineering, Aerospace

Grinding temperature and energy ratio coefficient in MQL grinding of high-temperature nickel-base alloy by using different vegetable oils as base oil

Li Benkai et al.

CHINESE JOURNAL OF AERONAUTICS (2016)

添加到收藏夹

Article Engineering, Manufacturing

A study on droplets sizes, their distribution and heat exchange for minimum quantity cooling lubrication (MQCL)

Radoslaw W. Maruda et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Review Green & Sustainable Science & Technology

Recent developments in sustainable manufacturing of gears: a review

Kapil Gupta et al.

JOURNAL OF CLEANER PRODUCTION (2016)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental evaluation of cooling performance by friction coefficient and specific friction energy in nanofluid minimum quantity lubrication grinding with different types of vegetable oil

Yanbin Zhang et al.

JOURNAL OF CLEANER PRODUCTION (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fabrication of superhydrophobic surfaces with high adhesive forces towards water on steel substrates

Xin Liu et al.

MICRO & NANO LETTERS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Role of nanomechanical properties in the tribological performance of phospholipid biomimetic surfaces

Ana-Maria Trunfio-Sfarghiu et al.

LANGMUIR (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.