☆ 4.7 Article

Static buckling analysis and geometrical optimization of magneto-electro-elastic sandwich plate with auxetic honeycomb core

THIN-WALLED STRUCTURES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mechanics

A comprehensive electro-magneto-elastic buckling and bending analyses of three-layered doubly curved nanoshell, based on nonlocal three-dimensional theory

Mohammad Arefi et al.

Summary: This paper investigates the three-dimensional magneto-electro-elastic bending and buckling analyses of three-layered doubly curved nanoshells based on nonlocal elasticity theory. The kinematic relations and governing equations are developed, and a parametric analysis is performed to examine the influence of various factors on the responses of the nanoshells.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fully-coupled electro-magneto-elastic behavior of unidirectional multiphased composites via finite-volume homogenization

Qiang Chen et al.

Summary: This study investigates the effective and localized electro-magneto-elastic behavior of periodic unidirectional composites using the FVDAM method, which is validated and tested for its efficiency and accuracy.

MECHANICS OF MATERIALS (2021)

添加到收藏夹

Article Mechanics

Influence of debonding on nonlinear deflection responses of curved composite panel structure under hygro-thermo-mechanical loading-macro-mechanical FE approach

Chetan Kumar Hirwani et al.

Summary: This study computationally analyzed the excess geometrical deformation of weakly bonded structures due to in-plane hygrothermal and transverse mechanical loading using customized MATLAB code, as well as prepared a macro mechanical model to evaluate the nonlinear deflection data and assess the impact of composite properties variation and delamination on the deflection parameters under combined loading conditions. The necessity of various kinematic models for analyzing laminated structures with or without hygrothermal loading and debonding was demonstrated through numerical examples.

INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2021)

添加到收藏夹

Article Engineering, Chemical

A combined multi-criterion optimization to determine optimum geometrical parameters for flow of an ecofriendly graphene-based nano fluid inside tube enhanced with twisted conical strip inserts

Mehdi Bahiraei et al.

Summary: The thermohydraulic attributes of a biologically produced nanofluid with graphene nanoplatelets inside a pipe with twisted conical strip inserts are optimized by adjusting the slant angle, geometry angle, and pitch. The genetic algorithm and compromise programming method are used to increase the Nusselt number and decrease the friction coefficient. In cases where the priorities of the friction coefficient and Nusselt number are similar, larger slant angles and smaller geometry angles should be utilized to achieve the optimal point where Nusselt number and friction factor increase significantly compared to a plain tube.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Civil

Nonlinear vibration and geometric optimization of nanocomposite multilayer organic solar cell under wind loading

Vu Minh Anh et al.

Summary: This paper presents an analytical approach on the nonlinear vibration of a nanocomposite multilayer organic solar cell subjected to wind load and temperature change. By deriving nonlinear motion equations and using various optimization algorithms, the maximum natural frequency of the cell is determined taking into account multiple variables. The study also considers the effects of different factors on the dynamic response and natural frequency of the solar cell.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Mechanics

A comprehensive analysis of auxetic honeycomb sandwich plates with graphene nanoplatelets reinforcement

Nam V. Nguyen et al.

Summary: This study proposes a computational approach for examining the behaviors of auxetic honeycomb sandwich plate structures, utilizing a combination of polygonal meshes and advanced deformation theory. By incorporating negative Poisson's ratio auxetic honeycomb cells and graphene nanoplatelets reinforcement, the sandwich plate structures achieve ultra-light features and enhanced stiffness. Bolotin's approach is utilized to determine the dynamic instability region of the sandwich plate structures.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Crack growth behavior and thermal shock resistance of ceramic sandwich structures with an auxetic honeycomb core

J. S. Hu et al.

Summary: This study developed a thermal-mechanical analysis model to describe the thermal shock behavior of ceramic sandwich structures with an auxetic honeycomb core. The results showed that the auxetic honeycomb core can substantially reduce the overall thermal stress level, providing higher thermal shock resistance compared to non-auxetic cores. The research provides valuable insights for the design and selection of CSSs in extreme temperature environments.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Nonlinear steady-state responses of weakly bonded composite shell structure under hygro-thermo-mechanical loading

Chetan Kumar Hirwani et al.

Summary: The nonlinear micromechanical finite element model is used to analyze the steady-state time-dependent deflections of weakly connected layered composite panels, considering different displacement theories and environmental effects. Various techniques are employed to predict deflection parameters under steady-state loadings, and the model responses are compared with published data to capture actual structural distortion. The applicability of the micromechanical FE model for predicting structural behavior is discussed based on numerical experiments involving geometry, material properties, end constraints, and debonding parameters.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Examination of thermal postbuckling behavior of temperature dependent FG-GRMMC laminated plates with in-plane negative Poisson's ratio

Hui-Shen Shen et al.

Summary: Auxetic composite laminates with in-plane negative Poisson's ratio can enhance the buckling temperatures of graphene-reinforced metal matrix composite plates. By arranging the layers in a piecemeal functionally graded pattern and considering the temperature-dependent material properties, the thermal postbuckling strength of the plates can be increased. Specifically, the FG-X pattern in plates with in-plane NPR shows higher postbuckling strength compared to other patterns.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Nonlinear Static Analysis of a Bi-directional Functionally Graded Microbeam Based on a Nonlinear Elastic Foundation Using Modified Couple Stress Theory

Mojtaba Gorji Azandariani et al.

Summary: A size-dependent Euler-Bernoulli beam model based on the modified couple stress theory was developed for nonlinear static analysis of a bidirectional functionally graded microbeam. The precision of the model was evaluated by comparing the results with previous studies, showing an average error of 1.3%. Parameter study indicated that increasing K-NL leads to an increase in nonlinear deflection, while increasing the dimensionless length scale parameter l(0) also increases the nonlinear deflection ratio.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Free vibration and buckling analyses of magneto-electro-elastic FGM nanoplates based on nonlocal modified higher-order sinusoidal shear deformation theory

Krzysztof Kamil Zur et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

The Dynamic response of shallow sandwich arch with auxetic metallic honeycomb core under localized impulsive loading

Li Ying et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

添加到收藏夹

Article Engineering, Civil

Nonlinear vibration of temperature-dependent FG-CNTRC laminated plates with negative Poisson's ratio

Jian Yang et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Thermodynamics

Structure and geometric dimension optimization of interlaced microchannel for heat transfer performance enhancement

Weisong Ling et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Mechanics

Postbuckling behavior of sandwich plates with functionally graded auxetic 3D lattice core

Chong Li et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Engineering, Mechanical

Large amplitude vibration of sandwich plates with functionally graded auxetic 3D lattice core

Chong Li et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

An optical-energy model for optimizing the geometrical layout of solar photovoltaic arrays in a constrained field

Naveed Ur Rehman et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

A transversely isotropic magneto-electro-elastic Timoshenko beam model incorporating microstructure and foundation effects

G. Y. Zhang et al.

MECHANICS OF MATERIALS (2020)

添加到收藏夹

Article Engineering, Mechanical

Nonlinear dynamic response of sandwich plates with functionally graded auxetic 3D lattice core

Chong Li et al.

NONLINEAR DYNAMICS (2020)

添加到收藏夹

Article Mechanics

Nonlinear vibrations of magneto-electro-elastic doubly curved shells reinforced with carbon nanotubes

M. Vinyas et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Materials Science, Composites

The static behaviors study of magneto-electro-elastic materials under hygrothermal environment with multi-physical cell-based smoothed finite element method

Ming Li et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

A novel stabilized node-based smoothed radial point interpolation method (SNS-RPIM) for coupling analysis of magneto-electro-elastic structures in hygrothermal environment

Shuhui Ren et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2020)

添加到收藏夹

Article Mechanics

Multiple mixed-mode cracks in a magneto-electro-elastic half-plane under in-plane loading

M. Ayatollahi et al.

ENGINEERING FRACTURE MECHANICS (2020)

添加到收藏夹

Article Mathematics, Applied

Investigation of bending behavior for laminated composite magneto-electro-elastic cylindrical shells subjected to mechanical or electric/magnetic loads

Wenbin Ye et al.

COMPUTERS & MATHEMATICS WITH APPLICATIONS (2020)

添加到收藏夹

Article Thermodynamics

Geometric optimization of a lid-driven cavity with two rectangular intrusions under mixed convection heat transfer: A numerical investigation motivated by constructal design

P. M. Rodrigues et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Interphase effect on the effective magneto-electro-elastic properties for three-phase fiber-reinforced composites by a semi-analytical approach

Y. Espinosa-Almeyda et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2020)

添加到收藏夹

Article Engineering, Civil

The multi-physical cell-based smoothed finite element method for analyzing transient behavior of functionally grade magneto-electro-elastic thin-walled structures under thermal environment

Ming Li et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Mechanics

Vibrational behavior of composite cylindrical shells with auxetic honeycombs core layer subjected to a moving pressure

Hamidreza Eipakchi et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Engineering, Mechanical

Dynamic compressive behaviour of auxetic and non-auxetic hexagonal honeycombs with entrapped gas

Sri Datta Rapaka et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2020)

添加到收藏夹

Article Engineering, Mechanical

Adaptive data-driven collaborative optimization of both geometric and loaded contact mechanical performances of non-orthogonal duplex helical face-milling spiral bevel and hypoid gears

Xuelin Chen et al.

MECHANISM AND MACHINE THEORY (2020)

添加到收藏夹

Article Engineering, Civil

Effect of negative poisson's ratio on the axially compressed postbuckling behavior of FG-GRMMC laminated cylindrical panels on elastic foundations

Hui-Shen Shen et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Mechanical

Analytical solutions for nonlinear magneto-electro-elastic vibration of smart sandwich plate with carbon nanotube reinforced nanocomposite core in hygrothermal environment

Ngo Dinh Dat et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Materials Science, Ceramics

Geometric optimization of aerogel composites for high temperature thermal insulation applications

He Liu et al.

JOURNAL OF NON-CRYSTALLINE SOLIDS (2020)

添加到收藏夹

Article Engineering, Mechanical

Transient responses of functionally graded magneto-electro-elastic structures with holes in thermal environment using stabilized node-based smoothed radial point interpolation method

Shuhui Ren et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Smart materials types, properties and applications: A review

Shashi Bahl et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Engineering, Aerospace

A comparative study of blast resistance of cylindrical sandwich panels with aluminum foam and auxetic honeycomb cores

Xuke Lan et al.

AEROSPACE SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Compression behavior of the graded metallic auxetic reentrant honeycomb: Experiment and finite element analysis

Dengbao Xiao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Engineering, Mechanical

Transient nonlinear responses of an auxetic honeycomb sandwich plate under impact loads

Junhua Zhang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2019)

添加到收藏夹

Article Mechanics

Blast resistance of auxetic and honeycomb sandwich panels: Comparisons and parametric designs

Gabriele Imbalzano et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Review Instruments & Instrumentation

Auxetic metamaterials and structures: a review

Xin Ren et al.

SMART MATERIALS AND STRUCTURES (2018)

添加到收藏夹

Article Engineering, Mechanical

Three-dimensional modelling of auxetic sandwich panels for localised impact resistance

Gabriele Imbalzano et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2017)

添加到收藏夹

Article Engineering, Aerospace

Enhancing buckling capacity of a rectangular plate under uniaxial compression by utilizing an auxetic material

Zhang Yongcun et al.

CHINESE JOURNAL OF AERONAUTICS (2016)

添加到收藏夹

Article Mechanics

Nonlinear transient analysis of smart laminated composite plate integrated with PVDF sensor and AFC actuator

Vijay K. Singh et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Mechanics

Nonlinear flexural analysis of single/doubly curved smart composite shell panels integrated with PFRC actuator

Vijay K. Singh et al.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2016)

添加到收藏夹

Article Mechanics

Nonlinear analysis of stability for functionally graded plates under mechanical and thermal loads

Hoang Van Tung et al.

COMPOSITE STRUCTURES (2010)

添加到收藏夹

Article Engineering, Multidisciplinary

Postbuckling of sandwich plates with FGM face sheets and temperature-dependent properties

Hui-Shen Shen et al.

COMPOSITES PART B-ENGINEERING (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.