4.6 Article

Device study and optimisation of CZTS/ZnS based solar cell with CuI hole transport layer for different conduction band offset

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Physics, Condensed Matter

Secondary phases in Cu2ZnSnS4 thin film solar cell: The role of interfaces

Yi-Man Zhang et al.

Summary: The study found that the presence of Cu2S secondary phase is not harmful and may even improve the photovoltaic performance of CZTS, while the presence of ZnS secondary phase is detrimental and should be avoided.

PHYSICA B-CONDENSED MATTER (2022)

Article Materials Science, Ceramics

Spray-deposited kesterite Cu2ZnSnS4 (CZTS): Optical, structural, and electrical investigations for solar cell applications

R. J. Deokate et al.

Summary: This study directly fabricated phase-pure kesterite CZTS films using a single-step spray pyrolysis technique, without the need for post sulfurization. The CZTS films obtained exhibit superior optical and electrical properties, and show excellent visible light absorption.

CERAMICS INTERNATIONAL (2022)

Article Energy & Fuels

Theoretical modelling and device structure engineering of kesterite solar cells to boost the conversion efficiency over 20%

D. Mora-Herrera et al.

Summary: This study used a numerical simulation model to analyze the structure and optimize the performance of CZTS solar cells, resulting in a significant improvement of power efficiency from 8.4% to 20.6%. Experimental results demonstrate that optimizing the device structure can increase the short-circuit current density and open circuit voltage, ultimately leading to higher efficiency.

SOLAR ENERGY (2021)

Article Engineering, Electrical & Electronic

Performance Analysis for SnS- and Sn2S3-Based Back Surface Field CZTSSe Solar Cell: A Simulation Study

Shivani Gohri et al.

Summary: CZTSSe-based solar cell structures have advantages of low cost, high stability, and high absorption coefficient, but their power conversion efficiency needs improvement. This study successfully increased efficiency from 12.57% to 16.34% and 17.04% by examining the feasibility of using SnS and Sn2S3 as BSF layer materials.

JOURNAL OF ELECTRONIC MATERIALS (2021)

Article Materials Science, Multidisciplinary

Br doping effect on structural, optical and electrical properties of ZnS thin films deposited by ultrasonic spray

A. Derbali et al.

Summary: This study investigates the impact of Bromine (Br) doping levels on the physical properties of Zinc Sulphide (ZnS) thin films. The results show that a 0.5% Br doping ratio improves the physical properties of ZnS and makes it suitable for optoelectronic devices fabrication. The Br-doped ZnS thin films demonstrate enhanced electrical, structural, and optical properties, showing improved surface morphology and transparency, with an increase in direct band gap values with higher Br concentrations.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2021)

Article Engineering, Electrical & Electronic

Investigation of molybdenum dopant effect on ZnS thin films: Chemical composition, structural, morphological, optical and luminescence surveys

Abdelhak Jrad et al.

Summary: Zinc sulfide thin films doped with molybdenum exhibit improved chemical composition, structural, morphological, optical, and luminescence properties. Molybdenum doping enhances optical properties, but also causes photoluminescence intensity quenching.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2021)

Article Energy & Fuels

Numerical modelling and analysis of earth abundant Sb2S3 and Sb2Se3 based solar cells using SCAPS-1D

Arindam Basak et al.

Summary: Antimony chalcogenides, Sb2S3 and Sb2Se3, show great potential for next generation solar cells due to their non-toxicity, earth abundance, low cost and easy availability. Through detailed numerical analysis and configuration optimization, the optimal parameters for achieving high efficiency solar cells using Sb2S3 and Sb2Se3 have been determined, including absorber layer thickness, buffer layer thickness, series-shunt resistance, and the choice of electrode material with suitable work function. Efficiencies of 9.51% and 12.62% have been achieved for Sb2S3 and Sb2Se3 solar cells respectively after optimizing different parameters.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2021)

Article Chemistry, Physical

INFLUENCE OF ROTATION RATE ON OPTICAL PROPERTIES OF ZnS THIN FILMS ANALYZED BY SPECTROSCOPIC ELLIPSOMETRY METHOD

Batool Ahmadi Khanegahi et al.

SURFACE REVIEW AND LETTERS (2020)

Article Materials Science, Multidisciplinary

Investigating the performance of formamidinium tin-based perovskite solar cell by SCAPS device simulation

S. Abdelaziz et al.

OPTICAL MATERIALS (2020)

Article Engineering, Electrical & Electronic

The impact of the carrier concentration and recombination current on the p+pn CZTS thin film solar cells

Shahin Enayati Maklavani et al.

OPTICAL AND QUANTUM ELECTRONICS (2020)

Article Materials Science, Multidisciplinary

Optical and structural characterization of aluminium doped zinc oxide thin films prepared by thermal evaporation system

Oday M. Abdulmunem et al.

OPTICAL MATERIALS (2020)

Article Materials Science, Multidisciplinary

Wide-range work function tuning in gold surfaces modified with fluorobenzenethiols toward application to organic thin-film transistors

Takumi Yoshioka et al.

FLEXIBLE AND PRINTED ELECTRONICS (2020)

Article Engineering, Electrical & Electronic

Fully depleted emitter layers: a novel method to improve band alignment in thin-film solar cells

B. G. Mendis

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2019)

Article Materials Science, Multidisciplinary

The effect of HTM on the performance of solid-state dye-sanitized solar cells (SDSSCs): a SCAPS-1D simulation study

Farhad Jahantigh et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2019)

Article Energy & Fuels

Efficiency enhancement of Cu2ZnSnS4 thin film solar cells by chromium doping

Nima Khoshsirat et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

Article Materials Science, Multidisciplinary

Towards high-efficiency CZTS solar cell through buffer layer optimization

Farjana Akter Jhuma et al.

MATERIALS FOR RENEWABLE AND SUSTAINABLE ENERGY (2019)

Article Materials Science, Multidisciplinary

Structural properties of CZTS thin films on glass and Mo coated glass substrates: a Rietveld refinement study

P. Prabeesh et al.

APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2018)

Article Chemistry, Physical

New ultra thin CIGS structure solar cells using SCAPS simulation program

H. Heriche et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Chemistry, Physical

Orientation-Dependent Work-Function Modification Using Substituted Pyrene-Based Acceptors

O. T. Hofmann et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2017)

Article Multidisciplinary Sciences

New energy with ZnS: novel applications for a standard transparent compound

Pino D'Amico et al.

SCIENTIFIC REPORTS (2017)

Article Chemistry, Physical

Study of CZTS and CZTSSe solar cells for buffer layers selection

Abdelbaki Cherouana et al.

APPLIED SURFACE SCIENCE (2017)

Article Physics, Applied

Role of vacancy defects in Al doped ZnO thin films for optoelectronic devices

H. Rotella et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2017)

Article Nanoscience & Nanotechnology

Optical Transmittance Enhancement of Flexible Copper Film Electrodes with a Wetting Layer for Organic Solar Cells

Guoqing Zhao et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Article Chemistry, Physical

Truly Transparent p-Type γ-Cul Thin Films with High Hole Mobility

Naoomi Yamada et al.

CHEMISTRY OF MATERIALS (2016)

Article Physics, Condensed Matter

Analysis of Cu2ZnSnS4/CdS based photovoltaic cell: A numerical simulation approach

S. R. Meher et al.

SUPERLATTICES AND MICROSTRUCTURES (2016)

Article Materials Science, Multidisciplinary

Pulsed-DC magnetron sputtering of intrinsic ZnO film and its application to CIS solar cell

Yeon Joo Lee et al.

VACUUM (2016)

Article Physics, Applied

Improvement of the open-circuit voltage of Cu2ZnSnS4 solar cells using a two-layer structure

Shin Tajima et al.

APPLIED PHYSICS EXPRESS (2015)

Article Chemistry, Physical

The effect of ZnS segregation on Zn-rich CZTS thin film solar cells

Wei Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2015)

Article Materials Science, Multidisciplinary

Effect of the chemical composition of co-sputtered Zn(O,S) buffer layers on Cu(In,Ga)Se2 solar cell performance

M. Buffiere et al.

PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2015)

Article Materials Science, Multidisciplinary

Improving Cu2ZnSnS4 (CZTS) solar cell performance by an ultrathin ZnO intermediate layer between CZTS absorber and Mo back contact

Xiaolei Liu et al.

PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS (2014)

Article Energy & Fuels

Characterization of a CZTS thin film solar cell grown by sputtering method

Tara P. Dhakal et al.

SOLAR ENERGY (2014)

Article Materials Science, Multidisciplinary

Optimization of sputtered ZnS buffer for Cu2ZnSnS4 thin film solar cells

Jongmin Kim et al.

THIN SOLID FILMS (2014)

Article Physics, Applied

Electrical properties of point defects in CdS and ZnS

J. B. Varley et al.

APPLIED PHYSICS LETTERS (2013)

Article Chemistry, Physical

Photoelectrocatalytic degradation of oxalic acid by spray deposited nanocrystalline zinc oxide thin films

S. S. Shinde et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2012)

Article Physics, Applied

First-principles study of γ-CuI for p-type transparent conducting materials

Dan Huang et al.

JOURNAL OF PHYSICS D-APPLIED PHYSICS (2012)

Article Materials Science, Multidisciplinary

Characterization of intrinsic ZnO thin film deposited by sputtering and its effects on CuIn1-xGaxSe2 solar cells

Minlin Jiang et al.

JOURNAL OF PHOTONICS FOR ENERGY (2012)

Article Physics, Applied

Native p-type transparent conductive CuI via intrinsic defects

Jing Wang et al.

JOURNAL OF APPLIED PHYSICS (2011)

Review Materials Science, Multidisciplinary

Point defects in ZnO: an approach from first principles

Fumiyasu Oba et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2011)

Article Chemistry, Multidisciplinary

Growth Strategy and Physical Properties of the High Mobility P-Type CuI Crystal

Dagui Chen et al.

CRYSTAL GROWTH & DESIGN (2010)

Article Materials Science, Multidisciplinary

Synthesis and properties of chemical bath deposited ZnS multilayer films

N. Kamoun Allouche et al.

MATERIALS CHEMISTRY AND PHYSICS (2010)

Article Energy & Fuels

Fabrication of Cu2ZnSnS4 screen printed layers for solar cells

Zhihua Zhou et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)

Review Physics, Applied

Defects in ZnO

M. D. McCluskey et al.

JOURNAL OF APPLIED PHYSICS (2009)

Article Materials Science, Multidisciplinary

Defect energetics in ZnO: A hybrid Hartree-Fock density functional study

Fumiyasu Oba et al.

PHYSICAL REVIEW B (2008)

Article Chemistry, Multidisciplinary

Preparation of Cu2ZnSnS4 thin films by hybrid sputtering

T Tanaka et al.

JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2005)

Article Chemistry, Physical

Zinc sulfide thin films deposited by RF reactive sputtering for photovoltaic applications

LX Shao et al.

APPLIED SURFACE SCIENCE (2003)

Article Materials Science, Coatings & Films

Effect of substrate position in i-ZnO thin-film formation to Cu(In,Ga)Se2 solar cell

T Yamaguchi et al.

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A (2002)

Article Materials Science, Multidisciplinary

Modelling polycrystalline semiconductor solar cells

M Burgelman et al.

THIN SOLID FILMS (2000)