4.6 Article

Influence of temperature on magnetorheological fluid properties and damping performance

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Numerical study on maximizing heat transfer and minimizing flow resistance behavior of metal foams owing to their structural properties

G. Trilok et al.

Summary: This study investigates the performance of metal foams based on their structural properties through numerical modeling of heat transfer and flow phenomena, analyzing the effects of foam structural parameters and applying TOPSIS technique for evaluating the performance of metal foams in maximizing heat transfer and minimizing flow resistance characteristics.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2021)

Article Instruments & Instrumentation

A novel magnetorheological fluid damper with a heat insulation function

Chengbin Du et al.

Summary: The novel magnetorheological fluid (MRF) damper designed with heat insulation material effectively reduced the temperature rise rate of the MRF and increased the damping force. Numerical simulation studied the temperature field and damping effect under different electromagnetic coil temperatures.

SMART MATERIALS AND STRUCTURES (2021)

Article Chemistry, Multidisciplinary

Effect of reduced graphene oxide and MnFe2O4 nanoparticles on carbonyl iron for magnetorheological fluids

Hyung-Yoon Choi et al.

Summary: This study introduced magnetic MnFe2O4 nanoparticles and graphene oxide to enhance the magnetorheological properties and dispersion stability of carbonyl iron-based MR fluid. The prepared CI/MnFe2O4/GO was transformed into CI/MnFe2O4/rGO through an annealing process and used as an additive for the MR fluid. The CI/MnFe2O4/rGO-based MR fluid exhibited improved shear stress, shear viscosity, and storage modulus compared to the CI-based MR fluid, with enhanced dispersion stability attributed to the properties of GO.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2021)

Article Materials Science, Multidisciplinary

Study of failure symptoms of a single-tube MR damper using an FEA-CFD approach

Wael Elsaady et al.

Summary: A new MR damper designed, manufactured, modelled, and tested under cyclic loads exhibited faulty behavior due to the presence of air bubbles in the MR fluid. A coupled numerical approach incorporating FEA of the magnetic circuit and CFD analysis of fluid flow supported the assumption that air bubbles significantly reduce damper force. The high viscosity of the MR fluid without a magnetic field enables the retention of air bubbles, causing the faulty behavior observed.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2021)

Article Instruments & Instrumentation

Effect of temperature on rheological properties of lithium-based magnetorheological grease

Huixing Wang et al.

SMART MATERIALS AND STRUCTURES (2019)

Article Instruments & Instrumentation

Temperature dependent modelling of magnetorheological (MR) dampers using support vector regression

C. Bharathi Priya et al.

SMART MATERIALS AND STRUCTURES (2019)

Article Materials Science, Multidisciplinary

Predicting the thermal sensitivity of MR damper performance based on thermo-rheological properties

Dipal M. Patel et al.

MATERIALS RESEARCH EXPRESS (2019)

Article Materials Science, Multidisciplinary

Effects of temperature on performance of compressible magnetorheological fluid suspension systems

Michael McKee et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2018)

Article Instruments & Instrumentation

Constitutive models of magnetorheological fluids having temperature-dependent prediction parameter

I Bahiuddin et al.

SMART MATERIALS AND STRUCTURES (2018)

Article Instruments & Instrumentation

Enhancing magnetorheological effect using bimodal suspensions in the single-multidomain limit

Jose R. Morillas et al.

SMART MATERIALS AND STRUCTURES (2018)

Article Materials Science, Multidisciplinary

Magneto-mechanical response of additive-free Fe-based magnetorheological fluids: role of particle shape and magnetic properties

A. Anupama et al.

MATERIALS RESEARCH EXPRESS (2018)

Article Chemistry, Physical

Effect of octahedral typed iron oxide particles on magnetorheological behavior of carbonyl iron dispersion

Seung Hyuk Kwon et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2018)

Article Engineering, Mechanical

Optimisation of monotube magnetorheological damper under shear mode

T. M. Gurubasavaraju et al.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2017)

Article Materials Science, Multidisciplinary

Effect of temperature on steady shear magnetorheology of CoNi microcluster-based MR fluids

Injamamul Arief et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2016)

Article Engineering, Manufacturing

A Novel Preparation Process for Magnetorheological Fluid with High Sedimentation Stability

Tian Zuzhi et al.

MATERIALS AND MANUFACTURING PROCESSES (2016)

Article Chemistry, Multidisciplinary

Magnetodielectric effects in composite materials based on paraffin, carbonyl iron and graphene

I. Bica et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2015)

Review Materials Science, Multidisciplinary

A review on the magnetorheological fluid preparation and stabilization

M. Ashtiani et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2015)

Article Materials Science, Multidisciplinary

Geometric parameter optimization of magneto-rheological damper using design of experiment technique

S. K. Mangal et al.

INTERNATIONAL JOURNAL OF MECHANICAL AND MATERIALS ENGINEERING (2015)

Article Multidisciplinary Sciences

Effect of Particle Size on Shear Stress of Magnetorheological Fluids

Chiranjit Sarkar et al.

SMART SCIENCE (2015)

Article Engineering, Multidisciplinary

Synthesis and characterization of magneto-rheological (MR) fluids for MR brake application

Bhau K. Kumbhar et al.

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH (2015)

Article Materials Science, Multidisciplinary

Temperature-dependent material properties of the components of magnetorheological fluids

Daoming Wang et al.

JOURNAL OF MATERIALS SCIENCE (2014)

Article Materials Science, Multidisciplinary

Design of magnetorheological damper with a combination of shear and squeeze modes

Izyan Iryani Mohd Yazid et al.

MATERIALS & DESIGN (2014)

Article Instruments & Instrumentation

A low sedimentation magnetorheological fluid based on plate-like iron particles, and verification using a damper test

Kruti Shah et al.

SMART MATERIALS AND STRUCTURES (2014)

Article Multidisciplinary Sciences

Synthesis and Characterization of Antifriction Magnetorheological Fluids for Brake

Chiranjit Sarkar et al.

DEFENCE SCIENCE JOURNAL (2013)

Article Instruments & Instrumentation

Silica-coated carbonyl iron microsphere based magnetorheological fluid and its damping force characteristics

Y. D. Liu et al.

SMART MATERIALS AND STRUCTURES (2013)

Article Construction & Building Technology

Design, performance test and analysis on magnetorheological damper for earthquake mitigation

Zhao-Dong Xu et al.

STRUCTURAL CONTROL & HEALTH MONITORING (2013)

Proceedings Paper Physics, Applied

Temperature induced effects on the durability of MR fluids

A. Wiehe et al.

13TH INTERNATIONAL CONFERENCE ON ELECTRORHEOLOGICAL FLUIDS AND MAGNETORHEOLOGICAL SUSPENSIONS (ERMR2012) (2013)

Proceedings Paper Physics, Applied

The behavior of the MR fluid during durability test

J. Roupec et al.

13TH INTERNATIONAL CONFERENCE ON ELECTRORHEOLOGICAL FLUIDS AND MAGNETORHEOLOGICAL SUSPENSIONS (ERMR2012) (2013)

Article Materials Science, Multidisciplinary

Compression and thermal conductivity characteristics of magnetorheological fluid-spacer fabric smart structures

Suleyman I. Mistik et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2012)

Article Automation & Control Systems

Optimal design of MR damper via finite element analyses of fluid dynamic and magnetic field

Zekeriya Parlak et al.

MECHATRONICS (2012)

Article Chemistry, Physical

Magnetic carbonyl iron suspension with organoclay additive and its magnetorheological properties

Mpitloane Joseph Hato et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)

Article Materials Science, Multidisciplinary

Design and Performance Evaluation of Magnetorheological Fluids Under Single and Mixed Modes

A. K. El Wahed et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2011)

Article Materials Science, Multidisciplinary

Dimorphic magnetorheological fluid with improved rheological properties

Wanquan Jiang et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2011)

Article Chemistry, Physical

Magnetorheology of soft magnetic carbonyl iron suspension with single-walled carbon nanotube additive and its yield stress scaling function

Fei Fei Fang et al.

COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2009)

Article Engineering, Electrical & Electronic

Effect of Magnetic Nanoparticle Additive on Characteristics of Magnetorheological Fluid

Kang Hyun Song et al.

IEEE TRANSACTIONS ON MAGNETICS (2009)

Article Automation & Control Systems

Rheological characterization of magnetorheological polishing fluid for MRAFF

Sunil Jha et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)

Article Materials Science, Multidisciplinary

Temperature Dependence of Magneto-rheological Materials

Huseyin Sahin et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2009)

Article Instruments & Instrumentation

Optimal design of a vehicle magnetorheological damper considering the damping force and dynamic range

Quoc-Hung Nguyen et al.

SMART MATERIALS AND STRUCTURES (2009)

Article Computer Science, Interdisciplinary Applications

Design, modelling and testing of magnetorheological (MR) dampers using analytical flow solutions

Weng W. Chooi et al.

COMPUTERS & STRUCTURES (2008)

Article Instruments & Instrumentation

Geometry optimization of MR valves constrained in a specific volume using the finite element method

Quoc-Hung Nguyen et al.

SMART MATERIALS & STRUCTURES (2007)

Article Physics, Applied

Phosphate coating on the surface of carbonyl iron powder and its effect in magnetorheological suspensions

Antonio J. F. Bombard et al.

INTERNATIONAL JOURNAL OF MODERN PHYSICS B (2007)

Article Instruments & Instrumentation

Statistical modeling of a magneto-rheological fluid damper using the design of experiments approach

A. C. Shivaram et al.

SMART MATERIALS AND STRUCTURES (2007)

Article Chemistry, Physical

Study of the colloidal stability of concentrated bimodal magnetic fluids

J. L. Viota et al.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2007)

Article Physics, Applied

Study on the mechanism of the squeeze-strengthen effect in magnetorheological fluids

XZ Zhang et al.

JOURNAL OF APPLIED PHYSICS (2004)

Article Materials Science, Multidisciplinary

Magnetorheological characterization of carbonyl iron based suspension stabilized by fumed silica

ST Lim et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2004)

Article Materials Science, Multidisciplinary

Augmenting heat transfer from fail-safe magneto-rheological fluid dampers using fins

MB Dogruoz et al.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2003)

Article Engineering, Mechanical

Tribological performance of a magneto-rheological suspension

PL Wong et al.