4.8 Article

Reciprocally Photovoltaic Light-Emitting Diode Based on Dispersive Perovskite Nanocrystal

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Optics

Comprehensive defect suppression in perovskite nanocrystals for high-efficiency light-emitting diodes

Young-Hoon Kim et al.

Summary: In this study, a one-dopant alloying strategy was employed to enhance electroluminescence efficiencies of metal halide perovskite nanocrystals (PNCs) by reducing defect formation and enhancing charge carrier confinement. Surface-stabilizing agents and bromide vacancy healing agents were utilized to decrease defect density and improve carrier confinement, resulting in significant enhancement in performance.

NATURE PHOTONICS (2021)

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

Article Multidisciplinary Sciences

Efficient perovskite solar cells via improved carrier management

Jason J. Yoo et al.

Summary: Metal halide perovskite solar cells have shown great potential to disrupt the silicon solar cell market with their improved performance, yet still face limitations in light-harvesting due to charge carrier recombination. Efforts to enhance charge carrier management offer a path to increase device performance and approach the theoretical efficiency limit of PSCs.

NATURE (2021)

Article Multidisciplinary Sciences

Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells

Jaeki Jeong et al.

Summary: The research introduces a new concept of using formate anion to suppress defects in metal halide perovskite films and enhance film crystallinity, leading to improved efficiency and stability of solar cells.

NATURE (2021)

Article Chemistry, Physical

The impact of spiro-OMeTAD photodoping on the reversible light-induced transients of perovskite solar cells

Boer Tan et al.

Summary: This study investigates the crucial role of hole transporting materials in lead halide perovskite solar cells, revealing that low doping levels lead to decreased performance due to the presence of a Schottky barrier at the interface. Continuous illumination and photodoping mechanisms lead to efficiency improvements, while also shedding light on the charge dynamics during light/dark cycling processes.

NANO ENERGY (2021)

Article Energy & Fuels

Trifluoromethylphenylacetic Acid as In Situ Accelerant of Ostwald Ripening for Stable and Efficient Perovskite Solar Cells

Hepeng Zhu et al.

Summary: The introduction of TFPA as a catalyst for Ostwald ripening and the development of the ICGC strategy have led to high-quality thin films with larger grain size and reduced defect density. This approach has improved the performance and stability of perovskite solar cells.

SOLAR RRL (2021)

Article Multidisciplinary Sciences

Manipulating crystallization dynamics through chelating molecules for bright perovskite emitters

Yatao Zou et al.

Summary: The chelate effect plays a critical role in controlling the crystallization dynamics of perovskite emitters and mitigating trap-mediated non-radiative losses, enhancing the coordination affinity and ultimately improving the efficiency of perovskite light-emitting diodes (PeLEDs).

NATURE COMMUNICATIONS (2021)

Article Multidisciplinary Sciences

Unveiling the additive-assisted oriented growth of perovskite crystallite for high performance light-emitting diodes

Lin Zhu et al.

Summary: Solution-processed metal halide perovskites with additives play a crucial role in passivating defects and influencing the crystallization process. By tracking chemical interactions and crystallographic evolution, suitable additives can be found to improve the quality of perovskite films and device performance.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

Temperature-Dependent Dynamic Carrier Process of FAPbI3 Nanocrystals' Film

Mingrui Tan et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2020)

Article Optics

Large-area near-infrared perovskite light-emitting diodes

Xiaofei Zhao et al.

NATURE PHOTONICS (2020)

Article Chemistry, Multidisciplinary

Graphdiyne: Bridging SnO2 and Perovskite in Planar Solar Cells

Suicai Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2020)

Article Nanoscience & Nanotechnology

Bipolar-shell resurfacing for blue LEDs based on strongly confined perovskite quantum dots

Yitong Dong et al.

NATURE NANOTECHNOLOGY (2020)

Review Materials Science, Multidisciplinary

Kelvin probe force microscopy for perovskite solar cells

Zhuo Kang et al.

SCIENCE CHINA-MATERIALS (2019)

Article Chemistry, Multidisciplinary

High-Efficiency Perovskite Light-Emitting Diodes with Synergetic Outcoupling Enhancement

Yang Shen et al.

ADVANCED MATERIALS (2019)

Article Nanoscience & Nanotechnology

Engineering Color-Stable Blue Light-Emitting Diodes with Lead Halide Perovskite Nanocrystals

Stefan T. Ochsenbein et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

Article Energy & Fuels

Alkali Salts as Interface Modifiers in n-i-p Hybrid Perovskite Solar Cells

Janardan Dagar et al.

SOLAR RRL (2019)

Review Chemistry, Multidisciplinary

Long-Lived Emissive Probes for Time-Resolved Photoluminescence Bioimaging and Biosensing

Kenneth Yin Zhang et al.

CHEMICAL REVIEWS (2018)

Article Materials Science, Coatings & Films

Surface modification of ZnO nanostructured film prepared by hot water oxidation

Mary Donnabelle L. Balela et al.

SURFACE & COATINGS TECHNOLOGY (2018)

Article Nanoscience & Nanotechnology

Research Update: Recombination and open-circuit voltage in lead-halide perovskites

Thomas Kirchartz et al.

APL MATERIALS (2018)

Article Chemistry, Multidisciplinary

Peroptronic devices: perovskite-based light-emitting solar cells

Hak-Beom Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

Article Chemistry, Physical

Enhancing moisture-tolerance and photovoltaic performances of FAPbI3 by bismuth incorporation

Yanqiang Hu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

Article Multidisciplinary Sciences

Efficient luminescent solar cells based on tailored mixed-cation perovskites

Dongqin Bi et al.

SCIENCE ADVANCES (2016)

Article Physics, Applied

Quantifying Losses in Open-Circuit Voltage in Solution-Processable Solar Cells

Jizhong Yao et al.

PHYSICAL REVIEW APPLIED (2015)

Article Nanoscience & Nanotechnology

In Situ KPFM Imaging of Local Photovoltaic Characteristics of Structured Organic Photovoltaic Devices

Satoshi Watanabe et al.

ACS APPLIED MATERIALS & INTERFACES (2014)

Article Chemistry, Multidisciplinary

In-Situ Switching from Barrier-Limited to Ohmic Anodes for Efficient Organic Optoelectronics

Zhi-Kuang Tan et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

Article Nanoscience & Nanotechnology

Bright light-emitting diodes based on organometal halide perovskite

Zhi-Kuang Tan et al.

NATURE NANOTECHNOLOGY (2014)

Article Energy & Fuels

Strong Internal and External Luminescence as Solar Cells Approach the Shockley-Queisser Limit

Owen D. Miller et al.

IEEE JOURNAL OF PHOTOVOLTAICS (2012)

Article Chemistry, Multidisciplinary

Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells

Akihiro Kojima et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)

Review Materials Science, Ceramics

Colloidal ZnO nanostructures and functional coatings: A survey

Lubomir Spanhel

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY (2006)

Article Physics, Applied

Fermi-level pinning at conjugated polymer interfaces

C Tengstedt et al.

APPLIED PHYSICS LETTERS (2006)

Article Chemistry, Physical

Hybrid zinc oxide conjugated polymer bulk heterojunction solar cells

WJE Beek et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2005)