4.7 Article

Enhanced energy efficiency and reduced CO2 emissions by hybrid heat integration in dimethyl carbonate production systems

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Chemical

Synthesis of heat-integrated pressure-swing azeotropic distillation using a graphical pinch analysis

Heecheon Lee et al.

Summary: A new graphical method based on pinch analysis is demonstrated for the design of pressure-swing distillation (PSD) and heat integration, showing the feasibility through visualization of feed data and temperature contours. The study reveals that different pinch pressures can be achieved in HIPSD system depending on column sequence or pure components separation order, and energy-efficient HIPSD can be achieved by considering pinch constraints.

AICHE JOURNAL (2022)

Review Engineering, Environmental

Review of recent technologies for transforming carbon dioxide to carbon materials

Jae Hyun Park et al.

Summary: Since the Industrial Revolution, greenhouse gas emissions have been continuously increasing with the widespread use of fossil fuels. In order to mitigate carbon dioxide emissions, various scientific technologies, including CCUS technology, have been developed. Conversion of carbon dioxide into carbon materials is a current hot research topic.

CHEMICAL ENGINEERING JOURNAL (2022)

Article Chemistry, Multidisciplinary

Temperature driven internal heat integration in an energy-efficient partial double annular column

Chaeyeong Seo et al.

Summary: This study introduces a strategy for internal heat integration in reactive distillation columns, showing that utilizing two RD columns for different temperature reactions can reduce energy consumption.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2022)

Article Engineering, Environmental

Process intensification of CO2 capture by low-aqueous solvent

Gyoung G. Jang et al.

Summary: This study investigates a novel intensified packing device for amine-CO2 scrubbing using low-aqueous solvent, which enhances heat and mass transfer efficiency to reduce the thermal energy consumption for solvent regeneration and improve CO2 capture efficiency under a wide range of operating conditions. The multifunctional intensified device facilitates contact between reactive solvent and gas phases in a single stage, while also allowing heat removal through a cooling fluid, leading to effective thermal management and significant improvement in CO2 uptake.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Multidisciplinary

Unfavorable energy integration of reactive dividing wall column for simultaneous esterification reactions

Haeri Mo et al.

Summary: The study focused on the unfavorable energy integration in the reactive dividing wall column for the concurrent esterification of butyl, amyl, and hexyl alcohols. Due to the high internal flow required to meet product purities, the thermal integration effect of the column was not as efficient as expected.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2021)

Article Energy & Fuels

Design and control of an alternative intensified process configuration for separation of butanol-butyl acetate-methyl isobutyl ketone system

Devrim B. Kaymak

Summary: A new process configuration is proposed in this study to separate a mixture without adding an azeotropic agent, significantly reducing both capital and energy costs. The plantwide control structure ensures robustness and effective control is achieved in dynamic simulation with composition controllers.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Article Energy & Fuels

Hybrid heat-integrated design and control for a diphenyl carbonate reactive distillation process

Hao-Yeh Lee et al.

Summary: This study proposed a hybrid heat-integrated configuration for the DPC indirect RD process, which can improve energy efficiency and reduce energy wastage. The research findings indicate that the hybrid configuration is superior to other configurations, saving up to 34.0% of energy for producing 99.5 mol% of DPC.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Article Thermodynamics

CFD-aided design of internally heat-integrated pressure-swing distillation for ternary azeotropic separation constrained by pinch pressure

Heecheon Lee et al.

Summary: This study focuses on the application of computational fluid dynamics (CFD) in designing internally heat-integrated pressure-swing distillation (HIPSD) for improved energy efficiency in azeotropic distillation. By calculating heat transfer rates inside the HIPSD using the CFD method, total utility consumption was reduced and reboiler and condenser duty in the HIPSD were significantly decreased. Improved separation efficiency in the condenser of the high-pressure column was achieved through internal heat integration.

APPLIED THERMAL ENGINEERING (2021)

Article Engineering, Chemical

Carbon dioxide capture with aqueous amino acids: Mechanistic study of amino acid regeneration by guanidine crystallization and process intensification

Abishek Kasturi et al.

Summary: This paper investigates CO2 capture from powerplant-generated flue gas via a phase-changing process involving absorption with aqueous amino acids and bicarbonate crystallization with bis-iminoguanidines. The results show that the thermodynamic driving force for glycine regeneration mainly comes from the GBIGH(2)(2+) bicarbonate crystallization step, while the rate-limiting step is the protonation of GBIG. This research provides a fundamental basis for developing an effective carbon capture technology with phase-changing amino acid/guanidine absorbents.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

Article Chemistry, Physical

Fundamental Aspects of Enhancing Low-Temperature CO2 Splitting to CO on a Double La2NiFeO6 Perovskite

Hyun Suk Lim et al.

Summary: This paper investigates the synergistic effect of binary Ni-Fe sites in La2NiFeO6 perovskite on low-temperature CO2 conversion to CO, demonstrating improved CO productivity and production rate compared to single LaNiO3 and LaFeO3 perovskites.

ACS CATALYSIS (2021)

Article Engineering, Chemical

Enhanced Energy Savings from Simultaneous Triple Esterification of C4-C6 Alcohols in a Single Reactive Distillation Column

Wonjoon Jang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Article Engineering, Chemical

Energy-Efficient Design of a Novel Double Annular Separation Column Using Pinch Pressure

Heecheon Lee et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2020)

Article Engineering, Chemical

Heat integrated technology assisted pressure-swing distillation for the mixture of ethylene glycol and 1,2-butanediol

Weixin Mao et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2020)

Article Engineering, Chemical

Energy-Efficient Reactive Dividing Wall Column for Simultaneous Esterification of n-Amyl Alcohol and n-Hexanol

Wonjoon Jiang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2019)

Article Chemistry, Multidisciplinary

Multiple transesterifications in a reactive dividing wall column integrated with a heat pump

Heecheon Lee et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2019)

Article Chemistry, Multidisciplinary

Plantwide design for high-purity formic acid reactive distillation process with dividing wall column and external heat integration arrangements

Felicia Januarlia Novita et al.

KOREAN JOURNAL OF CHEMICAL ENGINEERING (2018)

Article Engineering, Chemical

Heat-integrated pressure-swing distillation process for separating the minimum-boiling azeotrope ethyl-acetate and ethanol

Qingjun Zhang et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2017)

Article Energy & Fuels

A hybrid design combining double-effect thermal integration and heat pump to the methanol distillation process for improving energy efficiency

Chengtian Cui et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2017)

Article Engineering, Chemical

Performance Enhancement of Reactive Dividing-Wall Column via Vapor Recompression Heat Pump

Shenyao Feng et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2016)

Article Engineering, Chemical

A hybrid heat integration scheme for bioethanol separation through pressure-swing distillation route

Bandaru Kiran et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2015)

Article Energy & Fuels

Performance enhancement of vapor recompression heat pump

M. A. Waheed et al.

APPLIED ENERGY (2014)

Article Energy & Fuels

Improving energy efficiency of dividing-wall columns using heat pumps, Organic Rankine Cycle and Kalina Cycle

Jia Mei Chew et al.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2014)

Article Engineering, Chemical

Feasibility Evaluation of Quinary Heterogeneous Reactive Extractive Distillation

D. Kang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Article Engineering, Chemical

Novel Procedure for the Synthesis of Dimethyl Carbonate by Reactive Distillation

Zhixian Huang et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

Article Chemistry, Multidisciplinary

Production of DMC from CO2 via Indirect Route: Technical-Economical-Environmental Assessment and Analysis

Lorena F. S. Souza et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2014)

Article Engineering, Chemical

Design and Control of Dimethyl Carbonate-Methanol Separation via Pressure-Swing Distillation

Hong-Mei Wei et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2013)

Article Computer Science, Interdisciplinary Applications

Plant-wide design and control of DMC synthesis process via reactive distillation and thermally coupled extractive distillation

San-Jang Wang et al.

COMPUTERS & CHEMICAL ENGINEERING (2010)

Article Engineering, Chemical

A novel simplified configuration for an ideal heat-integrated distillation column (ideal HIDiC)

Haisheng Chen et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2010)

Article Engineering, Chemical

Reduction of Energy Consumption and Greenhouse Gas Emissions in a Plant for the Separation of Amines

Dionicio Jantes-Jaramillo et al.

CHEMICAL ENGINEERING & TECHNOLOGY (2008)

Article Engineering, Environmental

Reducing CO2 emissions and energy consumption of heat-integrated distillation systems

MA Gadalla et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2005)

Article Engineering, Chemical

Pinch analysis-based approach to conceptual design of internally heat-integrated distillation columns

M Gadalla et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2005)

Article Engineering, Chemical

Widening the applicability of reactive distillation technology by using concurrent design

F Citro et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2004)

Article Engineering, Chemical

Internally heat-integrated distillation columns: A review

M Nakaiwa et al.

CHEMICAL ENGINEERING RESEARCH & DESIGN (2003)