☆ 4.7 Article

Hydrometallurgical recovery of platinum-group metals from spent auto-catalysts-Focus on leaching and solvent extraction

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Chemical

Recovery of platinum group metals from spent automotive converters by leaching with organic and inorganic acids and extraction with quaternary phosphonium salts

Zuzanna Wiecka et al.

Summary: The paper presents studies on the application of hydrometallurgical recovery of platinum group metals (PGM) from spent automotive converters (SAC) through an integrated four-stage process, which includes leaching, extraction, and stripping. By using different acidic solutions and extractants, effective separation of different metals was achieved.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

添加到收藏夹

Review Environmental Sciences

Ionic Liquids in the Extraction and Recycling of Critical Metals from Urban Mines

A. P. Paiva et al.

Summary: Ionic liquids (ILs) are a fashionable trend in modern chemistry, known for their low vapor pressure and excellent stabilities. Researchers are exploring the use of ILs for hydrometallurgical extraction of critical metals from urban mines, aiming to promote metal recycling and valorization.

WASTE AND BIOMASS VALORIZATION (2021)

添加到收藏夹

Review Engineering, Chemical

Nonaqueous Solvent Extraction for Enhanced Metal Separations: Concept, Systems, and Mechanisms

Zheng Li et al.

Summary: Efficient and sustainable metal separation, particularly in non-aqueous solvent extraction systems, has gained increasing attention for its ability to enhance metal extraction and separation. This review highlights the importance of polar solvents and extractants in achieving remarkable metal separations in NASX systems.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2021)

添加到收藏夹

Article Chemistry, Physical

Recovery of Palladium(II) and Platinum(IV) in Novel Extraction Systems

Zuzanna Wiecka et al.

Summary: The study proposed novel pyridinium derivatives as extractants for recovering platinum group metals from model chloride aqueous solutions, showing their effectiveness in extracting platinum metal ions. However, there was no evident selectivity when extracting from a mixture of two metal ions. Further research should focus on improving the properties of the organic phase to enhance stripping efficiency.

MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Hydrometallurgical recovery of platinum group metals from spent automotive converters

Martyna Rzelewska-Piekut et al.

Summary: This study successfully recovered platinum group metals from spent automotive converters using hydrometallurgical techniques and investigated the leaching efficiency under different conditions. Further separation and recovery of Pt(IV) and Rh(III) were carried out using liquid-liquid extraction with quaternary phosphonium ionic liquid.

PHYSICOCHEMICAL PROBLEMS OF MINERAL PROCESSING (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solvometallurgical Recovery of Platinum Group Metals from Spent Automotive Catalysts

Viet Tu Nguyen et al.

Summary: This paper presents a solvometallurgical approach for the sustainable recovery of platinum group metals (PGMs) from spent automotive exhaust catalysts. By investigating solvoleaching and nonaqueous solvent extraction (NASX), effective separation and purification of palladium, platinum, and rhodium were achieved. The closed-loop solvoleaching process using less-hazardous chemicals reduces environmental impacts and waste generation, while NASX with an ionic liquid offers a more sustainable alternative for PGMs separation.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

添加到收藏夹

Article Engineering, Environmental

Microwave chloride leaching of valuable elements from spent automotive catalysts: Understanding the role of hydrogen peroxide

Thomas Abo Atia et al.

Summary: This study investigated the microwave-assisted leaching behavior of platinum group metals (PGMs) and light rare earth elements (LREEs) from end-of-life automotive ceramic catalysts. The in situ generated headspace gas, elemental speciation, and the addition of H2O2 solution all influenced the leachability. The presence of oxidized species and other oxidizable substrates played a role in the leaching efficiency, with H2O2 addition affecting the surface passivation and overall leachability differently for different catalyst compositions.

RESOURCES CONSERVATION AND RECYCLING (2021)

添加到收藏夹

Article Engineering, Chemical

Selective recovery of platinum by combining a novel reusable ionic liquid with electrodeposition

Muhan Chen et al.

Summary: Five new imidazolium ionic liquids were synthesized and evaluated for their efficiency in precipitating PtCl62- in HCl media. A novel mixed-ILs system showed excellent extraction efficiency for Pt(IV) from mixed metal solutions, selectively separating Pt(IV) ions from metal ions of Rh(III), Fe3+, Ni2+, Cu2+, and Zn2+. Surface characterization techniques confirmed the successful electrodeposition of metallic Pt on the cathode surfaces.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

Selective recovery of palladium and rhodium by combined extraction and photocatalytic reduction

Muhan Chen et al.

Summary: In this study, four novel functionalized ionic liquids were synthesized and used for the selective extraction of Pd(II) from an HCl medium containing Pt(IV), Pd(II), and Rh(III). The optimal system of [C5mim][DDTC]/CHCl3 was selected based on theoretical analysis, resulting in Pd(II) extraction efficiencies higher than 99%. Factors affecting Pd(II) extraction were investigated and optimized, achieving separation factors greater than 104. Overall, a simple hydrometallurgical process was developed to yield nanometer-scale Pd(0) and Rh(0) with high recovery rates from simulated secondary resource leaching solutions.

SEPARATION AND PURIFICATION TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Structural Effect of Sulfide-Containing Diamides on the Extraction of Palladium(II) from HCl

Hirokazu Narita et al.

Summary: The study explored the extraction properties of three sulfide-containing diamides (mptdga, mptdpa, and mpebtga) for extracting Pd(II) from HCl solution to understand the relationship between the structure and function of compounds. The results showed that all three diamides extracted Pd(II) faster than traditional sulfide extractants, with mpebtga > mptdpa > mptdga in terms of extraction efficiency. The apparent stoichiometry of the extracted complex varied between 1:1 for mpebtga and 1:2 for mptdga and mptdpa.

SOLVENT EXTRACTION AND ION EXCHANGE (2021)

添加到收藏夹

Article Chemistry, Physical

Highly selective extraction of Pd(II) using functionalized molecule of 2-[(2-ethylhexyl)thio]benzoxazole and its Pd(II) extraction mechanism

Shaoping Feng et al.

Summary: A functionalized extractant of EHBXS with excellent selectivity for Pd(II) was synthesized and used to extract Pd(II) efficiently from multi-metal aqueous solution. The regeneration ability of EHBXS for Pd(II) extraction remained high even after multiple cycles. Coordination mechanism between EHBXS and Pd(II) during extraction was proven via various analytical methods.

JOURNAL OF MOLECULAR STRUCTURE (2021)

添加到收藏夹

Article Energy & Fuels

Fast microwave leaching of platinum, rhodium and cerium from spent non-milled autocatalyst monolith

Thomas Abo Atia et al.

Summary: This study presents a new microwave leaching approach for solubilizing platinum group metals (PGMs) and cerium from spent ceramic autocatalysts. The process achieves high extraction yields without the need for milling pretreatment, oxidizing/reducing agents, or internal mixing, reducing energy consumption and process complexity. Additionally, high metal leachability and simplified downstream solid-liquid separation were achieved.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Recovery of Pd(II) in chloride solutions by solvent extraction with new vinyl sulfide ploymer extractants

Wei Shi et al.

Summary: A novel polymer extractant Poly-EDDYPF was designed and prepared, demonstrating high extraction efficiency and excellent acid resistance towards Pd(II). The experimental results showed that the extractant could efficiently extract Pd(II) from the organic phase and be reused for multiple cycles without significant decrease in extraction efficiency.

HYDROMETALLURGY (2021)

添加到收藏夹

Review Engineering, Environmental

Recycling pathways for platinum group metals from spent automotive catalyst: A review on conventional approaches and bio-processes

Salman Karim et al.

Summary: Metal-bearing solid wastes are important secondary sources of metals, with the recovery of metals from rich secondary sources being more economical and sustainable compared to mining from ores. Conventional recycling technologies for precious metals like platinum group metals from spent automotive catalysts have shortcomings, and bioprocesses are recognized as sustainable alternatives for metal recovery.

RESOURCES CONSERVATION AND RECYCLING (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Recovery of Platinum from a Spent Automotive Catalyst through Chloride Leaching and Solvent Extraction

Ana Mendez et al.

Summary: This study focuses on the recycling of critical metals from spent automotive catalytic converters through hydrometallurgical treatment and solvent extraction. The leaching scheme using HCl with CaCl2 shows potential for high Pt recovery and Ce recuperation, but solvent extraction for Pt separation needs further improvement. The organic solvent reutilization in the process also requires enhancement.

RECYCLING (2021)

添加到收藏夹

Review Green & Sustainable Science & Technology

Recovery of platinum group metals from spent automotive catalysts: A review

Iakovos Yakoumis et al.

Summary: PGMs are considered critical raw materials and their recovery is crucial for implementing a circular economy model. Secondary resources such as spent automotive catalytic converters have proven to be feasible sources for PGM recycling, with higher PGM concentrations than primary ores. Novel recovery techniques aim for high recovery rates, cost efficiency, and environmental protection.

CLEANER ENGINEERING AND TECHNOLOGY (2021)

添加到收藏夹

Article Environmental Sciences

Recovery of Rare Earth Element Cerium from Spent Automotive Exhaust Catalysts Using a Novel Method

Zhexuan Zhao et al.

WASTE AND BIOMASS VALORIZATION (2020)

添加到收藏夹

Article Environmental Sciences

Leaching efficiency and kinetics of the recovery of palladium and rhodium from a spent auto-catalyst in HCl/CuCl2 media

Carlos A. Nogueira et al.

ENVIRONMENTAL TECHNOLOGY (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Recovery of Pd(II) from leach solutions of automotive catalysts by solvent extraction with new thiophosphate extractants

Manabu Yamada et al.

HYDROMETALLURGY (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Single-Step Hydrometallurgical Method for the Platinum Group Metals Leaching from Commercial Spent Automotive Catalysts

Iakovos Yakoumis et al.

JOURNAL OF SUSTAINABLE METALLURGY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly selective extraction of palladium from spent automotive catalyst acid leachate using novel alkylated dioxa-dithiacrown ether derivatives

Rey Eliseo C. Torrejos et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

添加到收藏夹

Article Engineering, Chemical

Leaching of platinum group metals from spent automotive catalysts using organic acids

Jessica de Oliveira Demarco et al.

MINERALS ENGINEERING (2020)

添加到收藏夹

Article Engineering, Chemical

Separation of Pt(IV), Pd(II), Ru(III) and Rh(III) from model chloride solutions by liquid-liquid extraction with phosphonium ionic liquids

Martyna Rzelewska-Piekut et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2019)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

A review of recent studies into hydrometallurgical methods for recovering PGMs from used catalytic converters

Collins Saguru et al.

HYDROMETALLURGY (2018)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Recovery of palladium from a spent industrial catalyst through leaching and solvent extraction

Ana Paula Paiva et al.

HYDROMETALLURGY (2017)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recycling of Palladium from Spent Catalysts Using Solvent Extraction-Some Critical Points

Ana Paula Paiva

METALS (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Solvometallurgy: An Emerging Branch of Extractive Metallurgy

Koen Binnemans et al.

JOURNAL OF SUSTAINABLE METALLURGY (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

A novel zero emission concept for electrogenerated chlorine leaching and its application to extraction of platinum group metals from spent automotive catalyst

Min-seuk Kim et al.

HYDROMETALLURGY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly selective separation of individual platinum group metals (Pd, Pt, Rh) from acidic chloride media using phosphonium-based ionic liquid in aromatic diluent

Viet Tu Nguyen et al.

RSC ADVANCES (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Development of tertiary thioamide derivatives to recover palladium(II) Mark from simulated complex chloride solutions

Osvaldo Ortet et al.

HYDROMETALLURGY (2015)

添加到收藏夹

Article Engineering, Chemical

Liquid-liquid extraction of palladium(II) from chloride media by N,N′-dimethyl-N,N′-dicyclohexylthiodiglycolamide

Osvaldo Ortet et al.

SEPARATION AND PURIFICATION TECHNOLOGY (2015)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Solvent extraction of platinum using amine based extractants in different solutions: A review

Manis Kumar Jha et al.

HYDROMETALLURGY (2014)

添加到收藏夹

Article Engineering, Environmental

Oxidative leaching process with cupric ion in hydrochloric acid media for recovery of Pd and Rh from spent catalytic converters

C. A. Nogueira et al.

JOURNAL OF HAZARDOUS MATERIALS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

RECOVERY OF PLATINUM AND PALLADIUM FROM CHLORIDE SOLUTIONS BY A THIODIGLYCOLAMIDE DERIVATIVE

Ana Paula Paiva et al.

SOLVENT EXTRACTION AND ION EXCHANGE (2014)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: A review

Manis Kumar Jha et al.

HYDROMETALLURGY (2013)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Extraction and separation of platinum, palladium and rhodium using Cyanex 923 and their recovery from real samples

Bina Gupta et al.

HYDROMETALLURGY (2013)

添加到收藏夹

Article Materials Science, Coatings & Films

Deposition of aluminum oxide by evaporative coating at atmospheric pressure (ECAP)

Yui Lun Wu et al.

SURFACE & COATINGS TECHNOLOGY (2013)

添加到收藏夹

Article Environmental Sciences

Nickel-cadmium batteries: effect of electrode phase composition on acid leaching process

C. A. Nogueira et al.

ENVIRONMENTAL TECHNOLOGY (2012)

添加到收藏夹

Article Engineering, Environmental

Separation of platinum and rhodium from chloride solutions containing aluminum, magnesium and iron using solvent extraction and precipitation methods

B. Raju et al.

JOURNAL OF HAZARDOUS MATERIALS (2012)

添加到收藏夹

Article Engineering, Environmental

Recovery of platinum from spent catalysts by liquid-liquid extraction in chloride medium

Roberta Santos Marinho et al.

JOURNAL OF HAZARDOUS MATERIALS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Leaching of Pt, Pd and Rh from automotive catalyst residue in various chloride based solutions

S Harjanto et al.

MATERIALS TRANSACTIONS (2006)

添加到收藏夹

Article Materials Science, Multidisciplinary

Solvent extraction equilibria of FeCl3 with TBP

MS Lee et al.

MATERIALS TRANSACTIONS (2004)

添加到收藏夹

Article Engineering, Chemical

Selective enrichment of palladium from spent automotive catalysts by using a liquid membrane system

C Fontàs et al.

JOURNAL OF MEMBRANE SCIENCE (2003)

添加到收藏夹

Review Chemistry, Multidisciplinary

Review of recent solvent extraction studies for recovery of silver from aqueous solutions

AP Paiva

SOLVENT EXTRACTION AND ION EXCHANGE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.