相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A brief review on the chemical modifications of lignocellulosic fibers for durable engineering composites
Prosenjit Saha et al.
POLYMER BULLETIN (2016)
Thermal stability, flame retardance, and mechanical properties of polyamide 66 modified by a nitrogen-phosphorous reacting flame retardant
Wenyan Lyu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2016)
Effects of electrochemical oxidation of carbon fibers on interfacial shear strength using a micro-bond method
Dong-Kyu Kim et al.
CARBON LETTERS (2016)
X-ray computed microtomography and 2D image analysis for morphological characterization of short lignocellulosic fibers raw materials: A benchmark survey
Seif Eddine Hamdi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2015)
Influence of new thermoplastic sizing agents on the mechanical behavior of poly(ether ketone ketone)/carbon fiber composites
Isabelle Giraud et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
A review of low-temperature plasma treatment of textile materials
R. Abd Jelil
JOURNAL OF MATERIALS SCIENCE (2015)
Electrospinning of p-Aramid Fibers
Jian Yao et al.
MACROMOLECULAR MATERIALS AND ENGINEERING (2015)
Synthesis of high-performance polymers via copper-catalyzed amination of dibromoarenes with primary aromatic ether diamines
Zhenfang Shang et al.
MACROMOLECULAR RESEARCH (2015)
Soluble and crosslinkable poly(phthalazinone ether ketone)s with pendent terminal ethynyl groups: synthesis, characterization and click modification
QinZheng He et al.
POLYMER INTERNATIONAL (2015)
Effect of aspect ratios of aramid fiber on mechanical and tribological behaviors of friction materials
Peng Cai et al.
TRIBOLOGY INTERNATIONAL (2015)
Synthesis of new fluorene-based poly(aryl ether) containing pendant tert-butyl groups for low dielectric materials
Chenyi Wang et al.
COLLOID AND POLYMER SCIENCE (2015)
Synthesis and characterization of new poly(aryl ether ketone)s bearing (4-phenoxyphenyl)triphenylmethane moieties
Xiao Li et al.
HIGH PERFORMANCE POLYMERS (2015)
Selective Reduction of Aromatic Nitro Compounds over Recyclable Hollow Fiber Membrane-Supported Au Nanoparticles
Qianqian Ge et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2015)
Effect of screw design on fiber breakage and dispersion in injection-molded long glass-fiber-reinforced polypropylene
Akira Inoue et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Home-made epoxy emulsion sizing agent for treating carbon fibers: Thermal stability and mechanical properties
Qingbo Zhang et al.
JOURNAL OF COMPOSITE MATERIALS (2015)
Plasma Treatment in Textile Industry
Andrea Zille et al.
PLASMA PROCESSES AND POLYMERS (2015)
Carbon fiber surfaces and composite interphases
Mohit Sharma et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
Synthesis and properties of poly(aryl ether ketone)s with 2,6-diphenylpyridyl moieties and 4-trifluoromethylphenyl side groups
Xiao Li et al.
JOURNAL OF FLUORINE CHEMISTRY (2014)
Studies on the reprocessability of poly(ether ether ketone) (PEEK)
A. R. McLauchlin et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)
Design and preparation of high-performance amine-based poly(ether ketone)s with strong photonic luminescence
Guanjun Chang et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Enhanced thermomechanical properties of long and short glass fiber-reinforced polyamide 6,6/polypropylene mixtures by tuning the processing procedures
Namil Kim et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Environmental effects on viscoelastic behavior of carbon fiber/PEKK thermoplastic composites
Rogerio L. Mazur et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2014)
Preparation and performance of long carbon fiber reinforced polyamide 6 composites injection-molded from core/shell structured pellets
Honglin Luo et al.
MATERIALS & DESIGN (2014)
Grafting of carbon nanotubes onto carbon fiber surfaces by step-wise reduction of in-situ generated diazonium salts for enhancing carbon/epoxy interfaces
Yu-Ting Liu et al.
MATERIALS LETTERS (2014)
Synthetic Fibers and Thermoplastic Short-Fiber-Reinforced Polymers: Properties and Characterization
Christoph Unterweger et al.
POLYMER COMPOSITES (2014)
Effective Surface Functionalization of Carbon Fibers for Fiber/Polymer Composites with Tailor-Made Interfaces
Kota Shiba et al.
CHEMPLUSCHEM (2014)
Preparation of aqueous dispersion of thermoplastic sizing agent for carbon fiber by emulsion/solvent evaporation
Isabelle Giraud et al.
APPLIED SURFACE SCIENCE (2013)
A matricial approach of fibre breakage in twin-screw extrusion of glass fibres reinforced thermoplastics
Audrey Durin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
A model for fiber length attrition in injection-molded long-fiber composites
Jay H. Phelps et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Preparation of carbon nanotube/carbon fiber hybrid fiber by combining electrophoretic deposition and sizing process for enhancing interfacial strength in carbon fiber composites
S. Zhang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Synthesis and characterization of poly(ether ether ketone)s and poly(ether ether ketone ketone) s containing pendant biphenyl and naphthyl groups
Pandurang N. Honkhambe et al.
HIGH PERFORMANCE POLYMERS (2013)
Properties of carbon fiber sized with poly(phthalazinone ether ketone) resin
W. B. Liu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Soluble low- poly (aryl ether ketone) copolymers containing pendant adamantyl group and long aliphatic side chains
Jinyu Ba et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Electrochemical grafting of 4-phenoxybenzoic acid units onto oxidized carbon fibers as a first step for high temperature composites
Spyridon Soulis et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Crosslinking of modified poly(ether ether ketone) membranes for use in solvent resistant nanofiltration
Katrien Hendrix et al.
JOURNAL OF MEMBRANE SCIENCE (2013)
Effect of plasma modification on the mechanical properties of carbon fiber/phenolphthalein polyaryletherketone composites
Wei Li et al.
POLYMER COMPOSITES (2013)
Interfacial Shear Strength in Carbon Fiber-Reinforced Poly(phthalazinone ether ketone) Composites
Liu WenBo et al.
POLYMER COMPOSITES (2013)
Synthesis and Properties of Novel Copolymers of Poly(ether ketone ether ketone ketone) and Poly(ether amide amide ether ketone ketone)
Jiangping Qian et al.
POLYMER ENGINEERING AND SCIENCE (2013)
Polyphenylene sulfide (PPS): state of the art and applications
Ashok S. Rahate et al.
REVIEWS IN CHEMICAL ENGINEERING (2013)
Strengthening of CF/PEEK interface to improve the tribological performance in low amplitude oscillating wear mode
Mohit Sharma et al.
WEAR (2013)
PEEK polymer flammability and the inadequacy of the UL-94 classification
Parina Patel et al.
FIRE AND MATERIALS (2012)
Synthesis and characterization of novel epoxy-modified waterborne polyurethanes and their use in carbon fiber sizing
Zhanqing Liu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Ring-opening polymerization in molten PEEK: transient reduction of melt-viscosity by macrocyclic aromatic thioetherketones
Ioannis Manolakis et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Chemically and uniformly grafting carbon nanotubes onto carbon fibers by poly(amidoamine) for enhancing interfacial strength in carbon fiber composites
Qingyu Peng et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Preparation and properties of novel sulfonated poly(p-phenylene-co-aryl ether ketone)s for polymer electrolyte fuel cell applications
Xuan Zhang et al.
JOURNAL OF POWER SOURCES (2012)
Prediction of fiber orientation in the injection molding of long fiber suspensions
Kevin Ortman et al.
POLYMER COMPOSITES (2012)
Synthesis and Modification of Poly(ether ether ketone) and their Properties: A Review
Devesh Shukla et al.
POLYMER REVIEWS (2012)
Vortex shedding-free strainers
Y. Khulief et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING (2012)
High-performance nanocomposites based on polyetherketones
Ana M. Diez-Pascual et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Overview of the Development of the Fluoropolymer Industry
Hongxiang Teng
APPLIED SCIENCES-BASEL (2012)
Influence of Processing Parameters on the Fiber Length and Impact Properties of Injection Molded Long Glass Fiber Reinforced Polypropylene
M. Rohde et al.
INTERNATIONAL POLYMER PROCESSING (2011)
Poly(ether ether ketone)s and Poly(ether ether ketone ketone)s Containing Cardo Decahydronaphthalene Groups: Synthesis and Characterization
Pandurang N. Honkhambe et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Influence of cold remote nitrogen oxygen plasma treatment on carbon fabric and its composites with specialty polymers
Sudhir Tiwari et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Interfacial shear strength and tensile properties of injection-molded, short- and long-glass fiber-reinforced polyamide 6,6 composites
Aziz Hassan et al.
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (2011)
Synthesis and characterization of poly(aryl ether ketone)s with fluorinated phenyl in the side chain
Juan Xie et al.
POLYMER BULLETIN (2011)
Synthesis and properties of novel poly(aryl ether ketone)s containing imide linkages in the main chains
Hong Zhao et al.
POLYMER BULLETIN (2011)
Improving carbon fiber adhesion to polyimide with atmospheric pressure plasma treatment
Jianfei Xie et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Contributions to the thermal degradation mechanism under nitrogen atmosphere of PTFE by TG-FTIR analysis. Influence of the additive nature
Lucia Odochian et al.
THERMOCHIMICA ACTA (2011)
Abrasive wear studies on composites of PEEK and PES with modified surface of carbon fabric
Mohit Sharma et al.
TRIBOLOGY INTERNATIONAL (2011)
Wear performance of PEEK-carbon fabric composites with strengthened fiber-matrix interface
Mohit Sharma et al.
WEAR (2011)
Carbon nanotube-based hierarchical composites: a review
Hui Qian et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
A surface treatment technique of electrochemical oxidation to simultaneously improve the interfacial bonding strength and the tensile strength of PAN-based carbon fibers
Jie Liu et al.
MATERIALS CHEMISTRY AND PHYSICS (2010)
Synthesis, characterization, and crosslinking of soluble cyano-containing poly(arylene ether)s bearing phthalazinone moiety
Guipeng Yu et al.
POLYMER (2010)
Synthesis, mechanical properties and chemical/solvent resistance of crosslinked poly(aryl-ether-ether-ketones) at high temperatures
Michael E. Yurchenko et al.
POLYMER (2010)
The influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced polyamide 6,6
J. L. Thomason
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Modification Mechanism of the Surface-treated PAN-based Carbon Fiber by Electrochemical Oxidation
Guo Yun-Xia et al.
JOURNAL OF INORGANIC MATERIALS (2009)
Effect of fiber length on thermomechanical properties of short carbon fiber reinforced polypropylene composites
F. Rezaei et al.
MATERIALS & DESIGN (2009)
Improved thermal stability of crosslinked PTFE using fluorine gas treatment
Jae-Ho Kim et al.
JOURNAL OF FLUORINE CHEMISTRY (2008)
Crosslinkable poly(aryl ether ketone)s containing pendant phenylethynyl moieties: Synthesis, characterization and properties
Wanwan Li et al.
POLYMER (2008)
Interfacial adhesion of plasma-treated carbon fiber/poly(phthalazinone ether sulfone ketone) composite
Chun Lu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Preparation of a carbon nanotube/carbon fiber multi-scale reinforcement by grafting multi-walled carbon nanotubes onto the fibers
Xiaodong He et al.
CARBON (2007)
Behaviour of AZ31 magnesium alloy during compression at elevated temperatures
Q Guo et al.
MATERIALS SCIENCE AND TECHNOLOGY (2005)
Oxygen plasma treatment of high performance fibers for composites
GM Wu
MATERIALS CHEMISTRY AND PHYSICS (2004)
Novel uses of carbon composites for the fabrication of external fixators
C Migliaresi et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Basic analytical investigation of plasma-chemically modified carbon fibers
H Bubert et al.
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY (2002)
X-ray photoelectron spectroscopic studies of carbon fiber surfaces. 25. Interfacial interactions between PEKK polymer and carbon fibers electrochemically oxidized in nitric acid and degradation in a saline solution
YQ Wang et al.
CHEMISTRY OF MATERIALS (2001)
On the effect of reaction conditions on morphology of aromatic poly(ether-ketone)s, PEKK
DR Rueda et al.
JOURNAL OF MACROMOLECULAR SCIENCE-PHYSICS (2001)
分享论文
