☆ 4.6 Article

Similarity Simulation on the Movement Characteristics of Surrounding Rock and Floor Stress Distribution for Large-Dip Coal Seam

SENSORS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Geological

Similar Simulation Test of Overlying Rock Failure and Crack Evolution in Fully Mechanized Caving Face with Compound Roof

Wang Xiaolei

Summary: The study on the overburden failure and crack evolution in coal mining process is essential for the prevention and control of mine water and gas. The height of the fracture zone is greater than the caving zone, and the short-distance overlying rock of coal seams are the main areas for mining cracks accumulation.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2022)

添加到收藏夹

Article Energy & Fuels

Fracture criterion of basic roof deformation in fully mechanized mining with large dip angle

Ke Yang et al.

Summary: The study establishes a basic roof mechanical model to explore the stress distribution and pressure characteristics of the basic roof in large dip angle coal seam mining. The findings suggest that false roof increases the differentiation of gangue's filling rate in goaf and improves the evolution rate of basic roof fractures, being the main influencing factor on stress and deformation distribution in the basic roof.

ENERGY EXPLORATION & EXPLOITATION (2021)

添加到收藏夹

Article Mining & Mineral Processing

A hybrid tubular standing support for underground mines: Compressive behaviour

Hongchao Zhao et al.

Summary: This paper presents the development of an innovative standing support for underground mines, the PFT support, showcasing its high performance through a series of compression tests, and indicating that using thicker FRP jacket or high strength cementitious grout material can enhance its load carrying capacity.

INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Geological

Investigation of Failure Mechanism of Inclined Coal Pillars: Numerical Modelling and Tensorial Statistical Analysis with Field Validations

Arka Jyoti Das et al.

Summary: Analysis of the failure mechanism of inclined coal pillars is complex due to asymmetric stress distribution and shearing tendency along bedding planes. In-depth investigation and quantification of principal stress magnitudes and orientations at the onset of failure are essential. Results show that inclined coal pillars are highly susceptible to shear failure with increasing dip angles, and the mean induced principal stresses can be quantified by tensorial and classical statistics for better prediction of failure conditions.

ROCK MECHANICS AND ROCK ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Investigation on Surrounding Rock Stability Control Technology of High Stress Roadway in Steeply Dipping Coal Seam

Honglin Liu et al.

Summary: The study used numerical simulation to explore the stress distribution in surrounding rocks during underground roadway excavations in steeply dipping coal seams, proposing a damage coefficient to classify roof conditions and applying an asymmetric support technique. This research confirmed the feasibility of maintaining rock integrity through the asymmetric and partition support technique.

ADVANCES IN CIVIL ENGINEERING (2021)

添加到收藏夹

Article Geosciences, Multidisciplinary

Boundary distribution of top-coal limit-equilibrium zone in fully mechanized caving in steeply dipping coal seams

Ding Lang et al.

Summary: This study focused on the impact of coal seam dip on the gradual deterioration of top coal, using theoretical analysis, physical simulation, numerical simulation, and field measurements to quantitatively characterize the limit equilibrium boundary of top coal. The results revealed a consistent, asymmetric 'double arch' distribution of the two boundaries along the incline, with specific boundaries determined for different regions of the working face.

GEOMATICS NATURAL HAZARDS & RISK (2021)

添加到收藏夹

Article Engineering, Geological

Analysis on the Regular of Underground Pressure in Large Dip Angle Coal Seam with Soft Roof and Floor

Jianjun Shi et al.

Summary: This study focuses on the dip angle of coal seams and mining areas in Guanyinshan coal mine, as well as the analysis of main roof pressure and results from the three-dimensional simulation software. The research found that the initial caving distance of the working face and the initial pressure distance of the main roof have an impact on the caving height of the main roof, which increases gradually with mining activities.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Simulation Study of the Roof Fracture Pattern of a Horizontal Sublevel Caving in a Steeply Inclined Thick Coal Seam

Xin Kang et al.

ADVANCES IN CIVIL ENGINEERING (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Instability Mechanism of a Multi-Layer Gangue Roof and Determination of Support Resistance Under Inclination and Gravity

Panshi Xie et al.

MINING METALLURGY & EXPLORATION (2020)

添加到收藏夹

Article Construction & Building Technology

Failure Characteristics and Control Technology of Surrounding Rock in Deep Coal Seam Roadway with Large Dip Angle under the Influence of Weak Structural Plane

Xueyuan Qi et al.

ADVANCES IN CIVIL ENGINEERING (2020)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Roof Deformation Associated with Mining of Two Panels in Steeply Dipping Coal Seam Using Subsurface Subsidence Prediction Model and Physical Simulation Experiment

Panshi Xie et al.

MINING METALLURGY & EXPLORATION (2020)

添加到收藏夹

Article Construction & Building Technology

Research on Physical Similarity Simulation of Mining Uphill and Downhill at the Large-Angle Working Face

Meng Zhang et al.

ADVANCES IN CIVIL ENGINEERING (2019)

添加到收藏夹

Article Engineering, Geological

Generalised Analytical Models for the Strength of the Inclined as well as the Flat Coal Pillars using Rock Mass Failure Criterion

Arka Jyoti Das et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

添加到收藏夹

Article Engineering, Geological

Assessment of the Strength of Inclined Coal Pillars through Numerical Modelling based on the Ubiquitous Joint Model

Arka Jyoti Das et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

添加到收藏夹

Article Engineering, Geological

Effect of Shear Stresses on Pillar Stability: A Back Analysis of the Troy Mine Experience to Predict Pillar Performance at Montanore Mine

T. Garza-Cruz et al.

ROCK MECHANICS AND ROCK ENGINEERING (2019)

添加到收藏夹

Article Energy & Fuels

Flexible roadway protection technology in medium-thickness coal seam with large dip angle

Yanlei Wang et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2019)

添加到收藏夹

Article Engineering, Geological

Study on Ground Pressure Behavior Law of a Large-Cutting-Height Panel with Large Dip Angle

Dezhong Kong et al.

GEOTECHNICAL AND GEOLOGICAL ENGINEERING (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

State-of-the-art of standing supports for gob-side entry retaining technology in China

H. Zhao

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY (2019)

添加到收藏夹

Article Energy & Fuels

Similarity simulation of mining-crack-evolution characteristics of overburden strata in deep coal mining with large dip

Qing Ye et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2018)

添加到收藏夹

Proceedings Paper Engineering, Environmental

Stress distribution characteristics in the vicinity of coal seam floor

Zimo Cui et al.

2017 3RD INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION (ESMA2017), VOLS 1-4 (2018)

添加到收藏夹

Article Environmental Sciences

Study on time-varying characteristics of similar material model strength and the regulation measures

Huaizhan Li et al.

ENVIRONMENTAL EARTH SCIENCES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental Study on Low-Strength Similar-Material Proportioning and Properties for Coal Mining

Shaojie Chen et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Support stability mechanism in a coal face with large angles in both strike and dip

L. Q. Ma et al.

JOURNAL OF THE SOUTHERN AFRICAN INSTITUTE OF MINING AND METALLURGY (2015)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.