☆ 4.7 Article

Ultrahigh cryogenic strength and exceptional ductility at 20 K in a TWIP Ti-15Mo alloy

SCRIPTA MATERIALIA (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Facile route to implement transformation strengthening in titanium alloys

Guohua Zhao et al.

Summary: This study reported a method to deploy transformation-mediated strengthening in titanium alloys by supervised activation of TRIP and TWIP through mechanism-driven modelling, improving the mechanical properties of materials. By developing new alloys, notable resistance to strain localization was achieved, along with significant strain-hardening effects.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Abnormal strain rate strengthening and strain hardening with constitutive modeling in body-centered cubic {332} 113 TWIP titanium alloy

Kai Yao et al.

Summary: This study systematically clarifies the instantaneous strain rate sensitivity (ISRS) and strain rate sensitivity of strain hardening (SRSS) in the {332} < 113 > Ti-15Mo alloy exhibiting TWIP effect. The results show that ISRS is positively correlated with the change in the dislocation activation volume, while SRSS is negatively correlated with the evolution of deformation microstructures.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

High impact resistance of a TWIP β titanium alloy: linking the multi-scale deformation and fracture mechanisms

Chloe Varenne et al.

Summary: Titanium alloys with twinning- and transformation-induced plasticity effects exhibit high impact toughness. Research on the Ti-Cr-Sn alloy revealed that twins play a major role in the fracture process, significantly affecting its impact toughness.

JOURNAL OF MATERIALS SCIENCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

The role of strain rate and texture in the deformation of commercially pure titanium at cryogenic temperature

Min-Su Lee et al.

Summary: The study investigates the influence of strain rate and crystallographic texture on the hardening behavior and ductility of commercially pure titanium plate. Lower strain rate and cryogenic temperature lead to improved elongation and strain hardening, with a more significant effect observed at low temperatures.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Static and dynamic Hall-Petch relations in {332} 113 TWIP Ti-15Mo alloy

Kai Yao et al.

Summary: This study investigated the effect of grain size on the tensile properties of Ti-15Mo alloy, revealing that the impact decreased with increasing strain and eventually became negative. A dynamic Hall-Petch relation was established based on effective grain size, showcasing twin activation, twin suppression, and various interactions.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Investigation on the deformation mechanism of Ti-5Al-2.5Sn ELI titanium alloy at cryogenic and room temperatures

Zichuan Lu et al.

Summary: The study investigated the influence of temperature on the mechanical properties of Ti-5Al-2.5Sn ELI titanium alloy through tensile tests conducted at temperatures ranging from 20 K to 300 K. The experimental results showed that the alloy exhibited different deformation behaviors at room temperature and cryogenic temperature, with twinning deformation significantly improving the plastic deformation capacity at low temperatures. Additionally, the presence of a large number of dislocation structures contributed to enhancing the ultimate tensile strength of the alloy under cryogenic conditions.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural evolution and strain-hardening in TWIP Ti alloys

Guo-Hua Zhao et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

The mechanism of mechanical twinning near grain boundaries in twinning-induced plasticity steel

Jin-Sung Hong et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Review Chemistry, Physical

Hydrogen fuel in scramjet engines - A brief review

Gautam Choubey et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Origin of ω-phase formation in metastable β-type Ti-Mo alloys: cluster structure and stacking fault

Mingjia Li et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancement of impact toughness of β-type Ti-Mo alloy by {332}<113> twinning

Kai Yao et al.

JOURNAL OF MATERIALS SCIENCE (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Coupling effect of deformation mode and temperature on tensile properties in TWIP type Ti-Mo alloy

Kai Yao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel insight into the formation of α-martensite and ω-phase with cluster structure in metastable Ti-Mo alloys

Mingjia Li et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Cryogenic Mechanical Properties of Warm Multi-Pass Caliber-Rolled Fine-Grained Titanium Alloys: Ti-6Al-4V (Normal and ELI Grades) and VT14

Niraj Nayan et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Development of a high strength and high ductility near beta-Ti alloy with twinning induced plasticity effect

Lei Ren et al.

SCRIPTA MATERIALIA (2018)

添加到收藏夹

Article Engineering, Mechanical

Multiaxial constitutive model of discontinuous plastic flow at cryogenic temperatures

B. Skoczen et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Deformation and strength of Ti-6Al-4V alloyed with B at cryogenic temperatures

Gaurav Singh et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanism of twinning-induced plasticity in β-type Ti-15Mo alloy

Xiaohua Min et al.

SCRIPTA MATERIALIA (2013)

添加到收藏夹

Article Chemistry, Physical

The twin mechanism of Portevin Le Chatelier in Mg-5Li-3Al-1.5Zn-2RE alloy

T. Q. Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

添加到收藏夹

Article Multidisciplinary Sciences

Inverse temperature dependence of toughness in an ultrafine grain-structure steel

Yuuji Kimura et al.

SCIENCE (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Plastic deformation, damage and rupture of PM Ti-6Al-4V at 20 K under monotonic loading

Stephane Di Iorio et al.

ACTA MATERIALIA (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.