4.7 Article

Global copper cycles and greenhouse gas emissions in a 1.5 °C world

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

Future greenhouse gas emissions from metal production: gaps and opportunities towards climate goals

Ryosuke Yokoi et al.

Summary: This study predicts future greenhouse gas emissions related to the production of six metals by considering the metal cycles according to shared socio-economic pathways. It is found that even though trends for GHG emissions from metal production vary significantly among different SSPs, they cannot meet the climate goal of maintaining temperature change below 2 degrees C. Therefore, immediate actions to reduce GHG emissions are necessary.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Article Green & Sustainable Science & Technology

Limited climate benefits of global recycling of pulp and paper

Stijn van Ewijk et al.

Summary: Waste recycling is crucial in a circular economy, but the environmental benefits for certain materials remain uncertain. This study emphasizes the importance of reducing the carbon intensity of energy use for climate benefits, and highlights the need for careful consideration of energy implications in recycling efforts in the circular economy.

NATURE SUSTAINABILITY (2021)

Review Engineering, Environmental

Major metals demand, supply, and environmental impacts to 2100: A critical review

Takuma Watari et al.

Summary: Sustainable metal supply requires coordinated strategy and policy. Global demand for major metals is projected to increase continuously, but current extraction and processing scenarios lack explicit linkages to Earth's carrying capacity. Opportunities across entire life cycles of metal resources need more attention.

RESOURCES CONSERVATION AND RECYCLING (2021)

Article Geosciences, Multidisciplinary

Increased carbon footprint of materials production driven by rise in investments

Edgar G. Hertwich

Summary: The production of materials is a significant source of greenhouse gas emissions, and policies are being implemented worldwide to increase material efficiency and promote the circular economy. Research shows that greenhouse gas emissions from material production have been steadily increasing, with a majority of the growth coming from China. The carbon footprint of materials is mainly attributed to construction and the manufacturing of durable products, and policies should focus on addressing the growing capital stocks in emerging economies.

NATURE GEOSCIENCE (2021)

Article Multidisciplinary Sciences

Global greenhouse gas emissions from residential and commercial building materials and mitigation strategies to 2060

Xiaoyang Zhong et al.

Summary: The growth of building stock around the world drives extensive material consumption and environmental impacts. Future emissions will depend on socioeconomic development, material use strategies, and supply strategies. Increasing efficiency in the building material sector could reduce emissions by half by 2060, but additional emissions reductions are needed to meet the 1.5 degrees C target.

NATURE COMMUNICATIONS (2021)

Review Energy & Fuels

A Review of Life Extension Strategies for Offshore Wind Farms Using Techno-Economic Assessments

Benjamin Pakenham et al.

Summary: This study aims to investigate decommissioning and life extension strategies in the offshore wind sector through technical discussions and financial modeling. By employing a techno-economic approach, it provides insights for the offshore wind industry on the best course of action for current wind farms based on size and age.

ENERGIES (2021)

Article Economics

The technological and social timelines of climate mitigation: Lessons from 12 past transitions

Sarah Nelson et al.

Summary: This study points out that current policies largely ignore socially-driven mitigation and focus too much on technological innovation in the energy sector. It found that technological transitions take longer than social transitions. Governments should utilize both technological and social transitions in order to achieve net zero emissions by 2050.

ENERGY POLICY (2021)

Article Engineering, Environmental

Copper Recycling Flow Model for the United States Economy: Impact of Scrap Quality on Potential Energy Benefit

Tong Wang et al.

Summary: This study focuses on the impact of recycling copper scrap on the environment, finding that increasing recycling can lead to decreased energy consumption in copper production. However, the lower quality of unrecovered scrap limits further energy benefits from increased recycling. Improving yield ratios of final products and the grade of scrap can help increase copper circularity and decrease energy consumption.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2021)

Article Environmental Sciences

Contraction and convergence of in-use metal stocks to meet climate goals

Takuma Watari et al.

Summary: The production of metals is straining the Earth's resources, and in order to reduce emissions, global in-use metal stocks need to increase. Countries of different income levels have different responsibilities: wealthy countries should use existing stocks more intensively, while poor countries need to develop efficient infrastructure to reduce stock expansion demands.

GLOBAL ENVIRONMENTAL CHANGE-HUMAN AND POLICY DIMENSIONS (2021)

Article Green & Sustainable Science & Technology

Sustainable energy transitions require enhanced resource governance

Takuma Watari et al.

Summary: The global transition to decarbonized electricity and transport systems will increase metal extraction significantly, especially in countries with weak governance, leading to severe environmental degradation and unequal economic benefits. Circular economy strategies can help mitigate risks, but may not fully offset the growth in resource extraction.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Engineering, Environmental

Current challenges in copper recycling: aligning insights from material flow analysis with technological research developments and industry issues in Europe and North America

Antonia Loibl et al.

Summary: This paper examines the challenges and technological opportunities in the copper recycling chain, highlighting the increasing importance of complex end-of-life (EoL) scrap and the potential of sensor-based technologies. Global copper flows analysis shows that source separation of EoL scrap is considered not viable, and there are limited examples of sensor technologies specific to copper recycling tasks.

RESOURCES CONSERVATION AND RECYCLING (2021)

Article Multidisciplinary Sciences

Global scenarios of resource and emission savings from material efficiency in residential buildings and cars

Stefan Pauliuk et al.

Summary: Material production accounts for a quarter of global greenhouse gas emissions. Resource efficiency and circular economy strategies have the potential to reduce cumulative emissions by 20-52 Gt CO2-eq from residential buildings and 13-26 Gt CO2e-eq from cars by 2050.

NATURE COMMUNICATIONS (2021)

Article Engineering, Environmental

Discrete-Point Analysis of the Energy Demand of Primary versus Secondary Metal Production

Philipp Schaefer et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Geosciences, Multidisciplinary

Transparency on greenhouse gas emissions from mining to enable climate change mitigation

Mehdi Azadi et al.

NATURE GEOSCIENCE (2020)

Review Engineering, Environmental

Review of critical metal dynamics to 2050 for 48 elements

Takuma Watari et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

Article Environmental Sciences

Exploring future copper demand, recycling and associated greenhouse gas emissions in the EU-28

L. Ciacci et al.

GLOBAL ENVIRONMENTAL CHANGE-HUMAN AND POLICY DIMENSIONS (2020)

Article Environmental Sciences

The CO2 reduction potential for the European industry via direct electrification of heat supply (power-to-heat)

Silvia Madeddu et al.

ENVIRONMENTAL RESEARCH LETTERS (2020)

Article Multidisciplinary Sciences

The sponge effect and carbon emission mitigation potentials of the global cement cycle

Zhi Cao et al.

NATURE COMMUNICATIONS (2020)

Article Multidisciplinary Sciences

The social and environmental complexities of extracting energy transition metals

Eleonore Lebre et al.

NATURE COMMUNICATIONS (2020)

Article Engineering, Environmental

Reducing CO2 Emissions from US Steel Consumption by 70% by 2050

Nicole A. Ryan et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2020)

Article Green & Sustainable Science & Technology

Historical, Current, and Future Energy Demand from Global Copper Production and Its Impact on Climate Change

Nadine Roetzer et al.

RESOURCES-BASEL (2020)

Article Green & Sustainable Science & Technology

Environmental Implications of Future Demand Scenarios for Metals: Methodology and Application to the Case of Seven Major Metals

Ester Van der Voet et al.

JOURNAL OF INDUSTRIAL ECOLOGY (2019)

Article Engineering, Environmental

Global Distribution of Used and Unused Extracted Materials Induced by Consumption of Iron, Copper, and Nickel

Kenichi Nakajima et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2019)

Article Engineering, Environmental

Resource Demand Scenarios for the Major Metals

Ayman Elshkaki et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2018)

Article Environmental Sciences

Assessing environmental implications associated with global copper demand and supply scenarios from 2010 to 2050

Koen J. J. Kuipers et al.

GLOBAL ENVIRONMENTAL CHANGE-HUMAN AND POLICY DIMENSIONS (2018)

Article Green & Sustainable Science & Technology

Dynamic life cycle quantification of metallic elements and their circularity, efficiency, and leakages

Peng Wang et al.

JOURNAL OF CLEANER PRODUCTION (2018)

Article Engineering, Environmental

Metal supply constraints for a low-carbon economy?

Arjan de Koning et al.

RESOURCES CONSERVATION AND RECYCLING (2018)

Article Engineering, Environmental

Estimating global copper demand until 2100 with regression and stock dynamics

Branco W. Schipper et al.

RESOURCES CONSERVATION AND RECYCLING (2018)

Article Environmental Sciences

Scenarios towards limiting global mean temperature increase below 1.5 °C

Joeri Rogelj et al.

NATURE CLIMATE CHANGE (2018)

Article Environmental Sciences

The marker quantification of the Shared Socioeconomic Pathway 2: A middle-of-the-road scenario for the 21st century

Oliver Fricko et al.

GLOBAL ENVIRONMENTAL CHANGE-HUMAN AND POLICY DIMENSIONS (2017)

Article Environmental Sciences

The Shared Socioeconomic Pathways and their energy, land use, and greenhouse gas emissions implications: An overview

Keywan Riahi et al.

GLOBAL ENVIRONMENTAL CHANGE-HUMAN AND POLICY DIMENSIONS (2017)

Article Engineering, Environmental

Hybrid Sankey diagrams: Visual analysis of multidimensional data for understanding resource use

R. C. Lupton et al.

RESOURCES CONSERVATION AND RECYCLING (2017)

Article Environmental Sciences

Industrial ecology in integrated assessment models

Stefan Pauliuk et al.

NATURE CLIMATE CHANGE (2017)

Article Environmental Sciences

Copper demand, supply, and associated energy use to 2050

Ayman Elshkaki et al.

GLOBAL ENVIRONMENTAL CHANGE-HUMAN AND POLICY DIMENSIONS (2016)

Article Engineering, Environmental

Lost by Design

Luca Ciacci et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2015)

Review Engineering, Environmental

Modeling Metal Stocks and Flows: A Review of Dynamic Material Flow Analysis Methods

Esther Mueller et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2014)

Article Engineering, Environmental

Modelling future copper ore grade decline based on a detailed assessment of copper resources and mining

S. Northey et al.

RESOURCES CONSERVATION AND RECYCLING (2014)

Article Engineering, Environmental

The Roles of Energy and Material Efficiency in Meeting Steel Industry CO2 Targets

Rachel L. Milford et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)

Article Engineering, Environmental

The Steel Scrap Age

Stefan Pauliuk et al.

ENVIRONMENTAL SCIENCE & TECHNOLOGY (2013)

Article Green & Sustainable Science & Technology

Dynamic analysis of the global metals flows and stocks in electricity generation technologies

Ayman Elshkaki et al.

JOURNAL OF CLEANER PRODUCTION (2013)

Article Environmental Sciences

Stock dynamics and emission pathways of the global aluminium cycle

Gang Liu et al.

NATURE CLIMATE CHANGE (2013)

Article Materials Science, Multidisciplinary

Forecasting of the consumption of metals up to 2050

Kohmei Halada et al.

MATERIALS TRANSACTIONS (2008)