相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A flow-rate-controlled double-nozzles approach for electrochemical additive manufacturing
Yawen Guo et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2022)
Fabrication of design-optimized multifunctional safety cage with conformal circuits for drone using hybrid 3D printing technology
Guo Liang Goh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)
3D printing highly stretchable conductors for flexible electronics with low signal hysteresis
Jun Zhou et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2022)
The self-induced electric-field-driven jet printing for fabricating ultrafine silver grid transparent electrode
Zhi Wang et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2021)
Zeta Potential and Colloidal Stability Predictions for Inorganic Nanoparticle Dispersions: Effects of Experimental Conditions and Electrokinetic Models on the Interpretation of Results
Daniel Jose Pochapski et al.
LANGMUIR (2021)
Printable conductive inks used for the fabrication of electronics: an overview
Evgenia Dimitriou et al.
NANOTECHNOLOGY (2021)
3D Printing of Multilayered and Multimaterial Electronics: A Review
Guo Liang Goh et al.
ADVANCED ELECTRONIC MATERIALS (2021)
3D Co-Printing of 3D Electronics with a Dual Light Source Technology
Junfeng Xiao et al.
ADVANCED MATERIALS TECHNOLOGIES (2021)
A New Frontier of Printed Electronics: Flexible Hybrid Electronics
Yasser Khan et al.
ADVANCED MATERIALS (2020)
High-Viscosity Copper Paste Patterning and Application to Thin-Film Transistors Using Electrohydrodynamic Jet Printing
Thi Thu Thuy Can et al.
ADVANCED ENGINEERING MATERIALS (2020)
Nanomaterial Patterning in 3D Printing
Brian Elder et al.
ADVANCED MATERIALS (2020)
3D printed nanomaterial-based electronic, biomedical, and bioelectronic devices
Samuel Hales et al.
NANOTECHNOLOGY (2020)
Composite materials for printed electronics in Internet of Things applications
K. Janeczek
BULLETIN OF MATERIALS SCIENCE (2020)
Direct printing of performance tunable strain sensor via nanoparticle laser patterning process*
Ji-Hyeon Song et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
Additive-manufactured (3D-printed) electrochemical sensors: A critical review
Rafael M. Cardoso et al.
ANALYTICA CHIMICA ACTA (2020)
All-Inkjet Printed Organic Thin-Film Transistors with and without Photo-Sensitivity to Visible Lights
Chen Jiang
CRYSTALS (2020)
A highly stretchable and intrinsically self-healing strain sensor produced by 3D printing
Binbin Guo et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
3D printed hybrid-dimensional electrodes for flexible micro-supercapacitors with superior electrochemical behaviours
Kang Tang et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2020)
High-κ polymers of intrinsic microporosity: a new class of high temperature and low loss dielectrics for printed electronics
Zhongbo Zhang et al.
MATERIALS HORIZONS (2020)
Metallic Nanoparticle Inks for 3D Printing of Electronics
Hong Wei Tan et al.
ADVANCED ELECTRONIC MATERIALS (2019)
Printing Conductive Nanomaterials for Flexible and Stretchable Electronics: A Review of Materials, Processes, and Applications
Qijin Huang et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Stretchable electronics: functional materials, fabrication strategies and applications
Wei Wu
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2019)
Synthesis and Applications of Silver Nanowires for Transparent Conductive Films
Yue Shi et al.
MICROMACHINES (2019)
Monolithic Dual-Material 3D Printing of Ionic Skins with Long-Term Performance Stability
Xiang-Yu Yin et al.
ADVANCED FUNCTIONAL MATERIALS (2019)
A review of aerosol jet printing-a non-traditional hybrid process for micro-manufacturing
N. J. Wilkinson et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Solvodynamic Printing As A High Resolution Printing Method
W. C. Liu et al.
SCIENTIFIC REPORTS (2019)
Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics
Pei He et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Flexible and printed organic transistors: From materials to integrated circuits
Hiroyuki Matsui et al.
ORGANIC ELECTRONICS (2019)
Metal-Organic Decomposition Ink for Printed Electronics
Yejung Choi et al.
ADVANCED MATERIALS INTERFACES (2019)
A versatile PDMS submicrobead/graphene oxide nanocomposite ink for the direct ink writing of wearable micron-scale tactile sensors
Ge Shi et al.
APPLIED MATERIALS TODAY (2019)
Aerosol-Jet-Printed Preferentially Aligned Carbon Nanotube Twin-Lines for Printed Electronics
Guo Liang Goh et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Laser-Induced Forward Transfer: Fundamentals and Applications
Pere Serra et al.
ADVANCED MATERIALS TECHNOLOGIES (2019)
Print Me An Organ! Why We Are Not There Yet
Wei Long Ng et al.
PROGRESS IN POLYMER SCIENCE (2019)
Conducting Polymers for Flexible Supercapacitors
Yongqin Han et al.
MACROMOLECULAR CHEMISTRY AND PHYSICS (2019)
Recent Progress in Inkjet-Printed Thin-Film Transistors
Seungjun Chung et al.
ADVANCED SCIENCE (2019)
Wearable Bandage-Based Strain Sensor for Home Healthcare: Combining 3D Aerosol Jet Printing and Laser Sintering
Shweta Agarwala et al.
ACS SENSORS (2019)
Self-healing electronic skins for aquatic environments
Yue Cao et al.
NATURE ELECTRONICS (2019)
3D-printing and advanced manufacturing for electronics
Alejandro H. Espera et al.
PROGRESS IN ADDITIVE MANUFACTURING (2019)
Silver nanowire inks for direct-write electronic tattoo applications
Nicholas X. Williams et al.
NANOSCALE (2019)
Conductive nanomaterials for 2D and 3D printed flexible electronics
Alexander Kamyshny et al.
CHEMICAL SOCIETY REVIEWS (2019)
Silver-Based Plasmonic Nanoparticles for and Their Use in Biosensing
Alexis Loiseau et al.
BIOSENSORS-BASEL (2019)
A review on inkjet printing of nanoparticle inks for flexible electronics
Laxmidhar Nayak et al.
JOURNAL OF MATERIALS CHEMISTRY C (2019)
Recent Progress of Direct Ink Writing of Electronic Components for Advanced Wearable Devices
Yubai Zhang et al.
ACS APPLIED ELECTRONIC MATERIALS (2019)
Self-Healing Electronic Materials for a Smart and Sustainable Future
Yu Jun Tan et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Tough and Water-Insensitive Self-Healing Elastomer for Robust Electronic Skin
Jiheong Kang et al.
ADVANCED MATERIALS (2018)
Printed Electronics Based on Inorganic Semiconductors: From Processes and Materials to Devices
Suresh Kumar Garlapati et al.
ADVANCED MATERIALS (2018)
Printable Transparent Conductive Films for Flexible Electronics
Dongdong Li et al.
ADVANCED MATERIALS (2018)
Printed Micro-Sensors for Simultaneous Temperature and Humidity Detection
Fu-Ren Hsiao et al.
IEEE SENSORS JOURNAL (2018)
Solution-processable organic and hybrid gate dielectrics for printed electronics
Jinhua Li et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2018)
3D printing of electrically conductive hybrid organic-inorganic composite materials
Shreyas Shah et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2018)
A low cost and flexible carbon nanotube pH sensor fabricated using aerosol jet technology for live cell applications
Guo Liang Goh et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Printed flexible electrochemical pH sensors based on CuO nanorods
Libu Manjakkal et al.
SENSORS AND ACTUATORS B-CHEMICAL (2018)
Humidity-dependent wound sealing in succulent leaves of Delosperma cooperi - An adaptation to seasonal drought stress
Olga Speck et al.
BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2018)
Additive Manufacturing of Metallic and Ceramic Components by the Material Extrusion of Highly-Filled Polymers: A Review and Future Perspectives
Joamin Gonzalez-Gutierrez et al.
MATERIALS (2018)
Simple and cost-effective method of highly conductive and elastic carbon nanotube/polydimethylsiloxane composite for wearable electronics
Jeong Hun Kim et al.
SCIENTIFIC REPORTS (2018)
Filaments Production and Fused Deposition Modelling of ABS/Carbon Nanotubes Composites
Sithiprumnea Dul et al.
NANOMATERIALS (2018)
Graphene inks for printed flexible electronics: Graphene dispersions, ink formulations, printing techniques and applications
Tuan Sang Tran et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2018)
Fabrication of highly conductive and flexible printed electronics by low temperature sintering reactive silver ink
Yun Mou et al.
APPLIED SURFACE SCIENCE (2018)
Review of 3D printable hydrogels and constructs
Huijun Li et al.
MATERIALS & DESIGN (2018)
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Soroosh Derakhshanfar et al.
BIOACTIVE MATERIALS (2018)
A Transparent, Self-Healing, Highly Stretchable Ionic Conductor
Yue Cao et al.
ADVANCED MATERIALS (2017)
Preparation of nanoparticle and nanowire mixed pastes and their low temperature sintering
Wei Guo et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Inorganic nanomaterials for printed electronics: a review
Wei Wu
NANOSCALE (2017)
Development of CNTs-filled photopolymer for projection stereolithography
Hengky Eng et al.
RAPID PROTOTYPING JOURNAL (2017)
Highly stretchable polymer semiconductor films through the nanoconfinement effect
Jie Xu et al.
SCIENCE (2017)
A Review on 3D Printed Smart Devices for 4D Printing
Jeongwoo Lee et al.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2017)
A review of 4D printing
Farhang Momeni et al.
MATERIALS & DESIGN (2017)
4D printing of high performance shape memory polymer using stereolithography
Yu Ying Clarrisa Choong et al.
MATERIALS & DESIGN (2017)
Extrusion-on-demand methods for high solids loading ceramic paste in freeform extrusion fabrication
Wenbin Li et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Curing characteristics of shape memory polymers in 3D projection and laser stereolithography
Yu Ying Clarrisa Choong et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2017)
Optimizing aerosol jet printing process of silver ink for printed electronics
S. Agarwala et al.
2ND INTERNATIONAL CONFERENCE ON MINING, MATERIAL AND METALLURGICAL ENGINEERING (2017)
Low-Cost Fabrication of Printed Electronics Devices through Continuous Wave Laser-Induced Forward Transfer
Pol Sopena et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Graphene and silver-nanoprism dispersion for printing optically transparent electrodes
Dogan Sinar et al.
ORGANIC PHOTONIC MATERIALS AND DEVICES XIX (2017)
Novel thin layer flow-cell screen-printed graphene electrode for enzymatic sensors
Hussein Kanso et al.
BIOSENSORS & BIOELECTRONICS (2017)
3D bioprinting of structural proteins
Malgorzata K. Wlodarczyk-Biegun et al.
BIOMATERIALS (2017)
Advanced Materials for Use in Soft Self-Healing Devices
Tan-Phat Huynh et al.
ADVANCED MATERIALS (2017)
3D Stereolithography of Polymer Composites Reinforced with Orientated Nanoclay
H. Eng et al.
ICMAT 2017 SYMPOSIUM (M TO Z) (2017)
Inkjet-Printed Flexible Gold Electrode Arrays for Bioelectronic Interfaces
Yasser Khan et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Intensive Plasmonic Flash Light Sintering of Copper Nanoinks Using a Band-Pass Light Filter for Highly Electrically Conductive Electrodes in Printed Electronics
Yeon-Taek Hwang et al.
ACS APPLIED MATERIALS & INTERFACES (2016)
Inkjet Printing of a Highly Loaded Palladium Ink for Integrated, Low-Cost pH Sensors
Yiheng Qin et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Flexible Hybrid Electronics: Direct Interfacing of Soft and Hard Electronics for Wearable Health Monitoring
Yasser Khan et al.
ADVANCED FUNCTIONAL MATERIALS (2016)
Noble metal-based bimetallic nanoparticles: the effect of the structure on the optical, catalytic and photocatalytic properties
Adriana Zaleska-Medynska et al.
ADVANCES IN COLLOID AND INTERFACE SCIENCE (2016)
Inkjet-printed graphene electrodes for dye-sensitized solar cells
David Dodoo-Arhin et al.
CARBON (2016)
Fused deposition modelling with ABS-graphene nanocomposites
Sithiprumnea Dul et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2016)
Inkjet-printed bifunctional carbon nanotubes for pH sensing
Yiheng Qin et al.
MATERIALS LETTERS (2016)
Intrinsically stretchable and healable semiconducting polymer for organic transistors
Jin Young Oh et al.
NATURE (2016)
Polymers with autonomous life-cycle control
Jason F. Patrick et al.
NATURE (2016)
Printing of metallic 3D micro-objects by laser induced forward transfer
Michael Zenou et al.
OPTICS EXPRESS (2016)
Identifying orthogonal solvents for solution processed organic transistors
Abhinav M. Gaikwad et al.
ORGANIC ELECTRONICS (2016)
Gold nanorods with conjugated polymer ligands: sintering-free conductive inks for printed electronics
B. Reiser et al.
CHEMICAL SCIENCE (2016)
Towards pi-extended cycloparaphenylenes as seeds for CNT growth: investigating strain relieving ring-openings and rearrangements
Thomas J. Sisto et al.
CHEMICAL SCIENCE (2016)
Biodegradable electronics: cornerstone for sustainable electronics and transient applications
Mein Jin Tan et al.
JOURNAL OF MATERIALS CHEMISTRY C (2016)
All-printed magnetically self-healing electrochemical devices
Amay J. Bandodkar et al.
SCIENCE ADVANCES (2016)
A review of printed passive electronic components through fully additive manufacturing methods
H. W. Tan et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2016)
Inkjet Printing of Silver Nanowire Networks
David J. Finn et al.
ACS APPLIED MATERIALS & INTERFACES (2015)
Magnetic-Assisted, Self-Healable, Yarn-Based Supercapacitor
Yang Huang et al.
ACS NANO (2015)
Piezoelectric materials for tissue regeneration: A review
Amir Hossein Rajabi et al.
ACTA BIOMATERIALIA (2015)
A Self-Healing Electronic Sensor Based on Thermal-Sensitive Fluids
Yonglin He et al.
ADVANCED MATERIALS (2015)
Seed-free synthesis of 1D silver nanowires ink using clove oil (Syzygium Aromaticum) at room temperature
Alagan Jeevika et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2015)
Emerging Carbon and Post-Carbon Nanomaterial Inks for Printed Electronics
Ethan B. Secor et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2015)
Inkjet printing for biosensor fabrication: combining chemistry and technology for advanced manufacturing
Jia Li et al.
LAB ON A CHIP (2015)
Single-walled carbon nanotube networks for flexible and printed electronics
Jana Zaumseil
SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2015)
Mechanisms, Capabilities, and Applications of High-Resolution Electrohydrodynamic Jet Printing
M. Serdar Onses et al.
SMALL (2015)
3D Printable Graphene Composite
Xiaojun Wei et al.
SCIENTIFIC REPORTS (2015)
Inkjet Printed Conductive Tracks for Printed Electronics
S. -P. Chen et al.
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2015)
A Self-Reducible and Alcohol-Soluble Copper-Based Metal-Organic Decomposition Ink for Printed Electronics
Dong-Hun Shin et al.
ACS APPLIED MATERIALS & INTERFACES (2014)
Healable Capacitive Touch Screen Sensors Based on Transparent Composite Electrodes Comprising Silver Nanowires and a Furan/Maleimide Diels-Alder Cycloaddition Polymer
Junpeng Li et al.
ACS NANO (2014)
Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Joseph T. Muth et al.
ADVANCED MATERIALS (2014)
A Mechanically and Electrically Self-Healing Supercapacitor
Hua Wang et al.
ADVANCED MATERIALS (2014)
Low temperature plasma sintering of silver nanoparticles
Siyuan Ma et al.
APPLIED SURFACE SCIENCE (2014)
Tissue engineering of electrically responsive tissues using polyaniline based polymers: A review
Taimoor H. Qazi et al.
BIOMATERIALS (2014)
Inkjet Printing Patterns of Highly Conductive Pristine Graphene on Flexible Substrates
Yahui Gao et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)
Organic semiconductors for device applications: current trends and future prospects
Shamim Ahmad
JOURNAL OF POLYMER ENGINEERING (2014)
Preparation of conductive Cu patterns by directly writing using nano-Cu ink
Wei Li et al.
MATERIALS CHEMISTRY AND PHYSICS (2014)
Low-cost and flexible printed graphene-PEDOT:PSS gas sensor for ammonia detection
Yotsarayuth Seekaew et al.
ORGANIC ELECTRONICS (2014)
Fully printed electronics on flexible substrates: High gain amplifiers and DAC
Joseph Chang et al.
ORGANIC ELECTRONICS (2014)
Conductive Nanomaterials for Printed Electronics
Alexander Kamyshny et al.
SMALL (2014)
The effect of poly (N-vinylpyrrolidone) molecular weight on flash light sintering of copper nanopaste
Yoon-Jin Kim et al.
THIN SOLID FILMS (2014)
Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices
Sebastian Wuenscher et al.
JOURNAL OF MATERIALS CHEMISTRY C (2014)
Carbon nanotubes: properties, synthesis, purification, and medical applications
Ali Eatemadi et al.
NANOSCALE RESEARCH LETTERS (2014)
Room Temperature Synthesis of a Copper Ink for the Intense Pulsed Light Sintering of Conductive Copper Films
Ruvini Dharmadasa et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Highly Stretchable, Integrated Supercapacitors Based on Single-Walled Carbon Nanotube Films with Continuous Reticulate Architecture
Zhiqiang Niu et al.
ADVANCED MATERIALS (2013)
Solution-processable metal oxide semiconductors for thin-film transistor applications
Stuart R. Thomas et al.
CHEMICAL SOCIETY REVIEWS (2013)
Aerosol-Printed Strain Sensor Using PEDOT:PSS
Bradley Thompson et al.
IEEE SENSORS JOURNAL (2013)
Miniaturisation of dual band monopole antennas loaded with screen printed cobalt nanoparticle ink
Arun K. Sowpati et al.
IET MICROWAVES ANTENNAS & PROPAGATION (2013)
Rapid low-pressure plasma sintering of inkjet-printed silver nanoparticles for RFID antennas
Franziska M. Wolf et al.
JOURNAL OF MATERIALS RESEARCH (2013)
Novel approaches for low temperature sintering of inkjet-printed inorganic nanoparticles for roll-to-roll (R2R) applications
Jolke Perelaer et al.
JOURNAL OF MATERIALS RESEARCH (2013)
All-carbon-based field effect transistors fabricated by aerosol jet printing on flexible substrates
Rui Liu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2013)
Inkjet Printing of High Conductivity, Flexible Graphene Patterns
Ethan B. Secor et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2013)
Cu Salt Ink Formulation for Printed Electronics using Photonic Sintering
Teppei Araki et al.
LANGMUIR (2013)
3D Printed Bionic Ears
Manu S. Mannoor et al.
NANO LETTERS (2013)
An ultra-lightweight design for imperceptible plastic electronics
Martin Kaltenbrunner et al.
NATURE (2013)
Ultrathin, highly flexible and stretchable PLEDs
Matthew S. White et al.
NATURE PHOTONICS (2013)
Photonic sintering of inkjet printed current collecting grids for organic solar cell applications
Yulia Galagan et al.
ORGANIC ELECTRONICS (2013)
Stretchable and self-healing polymers and devices for electronic skin
Stephanie J. Benight et al.
PROGRESS IN POLYMER SCIENCE (2013)
Carbon Nanotubes: Present and Future Commercial Applications
Michael F. L. De Volder et al.
SCIENCE (2013)
Inkjet printed transparent conductive films using water-dispersible single-walled carbon nanotubes treated by UV/ozone irradiation
Young-In Lee et al.
THIN SOLID FILMS (2013)
Particle-free gold metal-organic decomposition ink for inkjet printing of gold structures
Claudia Schoner et al.
THIN SOLID FILMS (2013)
Screen-Printable Thin Film Supercapacitor Device Utilizing Graphene/Polyaniline Inks
Yanfei Xu et al.
ADVANCED ENERGY MATERIALS (2013)
Carbon Nanotubes: A Review on Structure and Their Interaction with Proteins
N. Saifuddin et al.
JOURNAL OF CHEMISTRY (2013)
Inkjet-printed organic thin film transistors based on TIPS pentacene with insulating polymers
Song Yun Cho et al.
JOURNAL OF MATERIALS CHEMISTRY C (2013)
Plasma and Microwave Flash Sintering of a Tailored Silver Nanoparticle Ink, Yielding 60% Bulk Conductivity on Cost- Effective Polymer Foils
Jolke Perelaer et al.
ADVANCED MATERIALS (2012)
Roll-to-Roll Compatible Sintering of Inkjet Printed Features by Photonic and Microwave Exposure: From Non-Conductive Ink to 40% Bulk Silver Conductivity in Less Than 15 Seconds
Jolke Perelaer et al.
ADVANCED MATERIALS (2012)
Inkjet printing of conductive materials: a review
Gerard Cummins et al.
CIRCUIT WORLD (2012)
One step synthesis of uniform organic silver ink drawing directly on paper substrates
Wen-dong Yang et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Localized atmospheric plasma sintering of inkjet printed silver nanoparticles
Sebastian Wuenscher et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Large-scale roll-to-roll photonic sintering of flexo printed silver nanoparticle electrodes
Markus Hosel et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Scale-up synthesis of ZnO nanorods for printing inexpensive ZnO/polymer white light-emitting diode
G. Amin et al.
JOURNAL OF MATERIALS SCIENCE (2012)
A multimaterial electrohydrodynamic jet (E-jet) printing system
E. Sutanto et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2012)
Synthesis and characterization of highly conductive Sn-Ag bimetallic nanoparticles for printed electronics
Yun Hwan Jo et al.
JOURNAL OF NANOPARTICLE RESEARCH (2012)
Flexible Gigahertz Transistors Derived from Solution-Based Single-Layer Graphene
Cedric Sire et al.
NANO LETTERS (2012)
Conductivity enhancement of aerosol-jet printed electronics by using silver nanoparticles ink with carbon nanotubes
Da Zhao et al.
MICROELECTRONIC ENGINEERING (2012)
All-inkjet-printed electrical components and circuit fabrication on a plastic substrate
Byung Ju Kang et al.
MICROELECTRONIC ENGINEERING (2012)
High-performance organic thin film transistors based on inkjet-printed polymer/TIPS pentacene blends
Song Yun Cho et al.
ORGANIC ELECTRONICS (2012)
A Simple, Low-Cost Conductive Composite Material for 3D Printing of Electronic Sensors
Simon J. Leigh et al.
PLOS ONE (2012)
Integrating stereolithography and direct print technologies for 3D structural electronics fabrication
Amit Joe Lopes et al.
RAPID PROTOTYPING JOURNAL (2012)
Chemical functionalization of graphene and its applications
Tapas Kuila et al.
PROGRESS IN MATERIALS SCIENCE (2012)
Conformal Printing of Electrically Small Antennas on Three-Dimensional Surfaces
Jacob J. Adams et al.
ADVANCED MATERIALS (2011)
Silver nanoplates as inkjet ink particles for metallization at a low baking temperature of 100°C
Chien-Liang Lee et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)
Control of high-resolution electrohydrodynamic jet printing
Kira Barton et al.
CONTROL ENGINEERING PRACTICE (2011)
Reactive Sintering of Copper Nanoparticles Using Intense Pulsed Light for Printed Electronics
Jongeun Ryu et al.
JOURNAL OF ELECTRONIC MATERIALS (2011)
Sintering of Inkjet-Printed Silver Nanoparticles at Room Temperature Using Intense Pulsed Light
J. S. Kang et al.
JOURNAL OF ELECTRONIC MATERIALS (2011)
Infra-red assisted sintering of inkjet printed silver tracks on paper substrates
Aurore Denneulin et al.
JOURNAL OF NANOPARTICLE RESEARCH (2011)
Application of conductive polymers, scaffolds and electrical stimulation for nerve tissue engineering
Laleh Ghasemi-Mobarakeh et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2011)
Synthesis of silver nano particles and fabrication of aqueous Ag inks for inkjet printing
A. Kosmala et al.
MATERIALS CHEMISTRY AND PHYSICS (2011)
Low temperature nanoparticle sintering with continuous wave and pulse lasers
Tero Kumpulainen et al.
OPTICS AND LASER TECHNOLOGY (2011)
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Shlomo Magdassi et al.
ACS NANO (2010)
Synthesizing polystyrene/carbon nanotube composites by emulsion polymerization with non-covalent and covalent functionalization
Miftah U. Khan et al.
CARBON (2010)
Highly Efficient Inkjet-Printed Organic Photovoltaic Cells
Jaewook Jung et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2010)
Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials
Jolke Perelaer et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Graphene Field-Effect Transistors with High On/Off Current Ratio and Large Transport Band Gap at Room Temperature
Fengnian Xia et al.
NANO LETTERS (2010)
A desktop electrohydrodynamic jet printing system
Kira Barton et al.
MECHATRONICS (2010)
Inkjetting dielectric layer for electronic applications
Kimmo Kaija et al.
MICROELECTRONIC ENGINEERING (2010)
High efficiency polymer solar cells via sequential inkjet-printing of PEDOT:PSS and P3HT:PCBM inks with additives
Seung Hun Eom et al.
ORGANIC ELECTRONICS (2010)
FORMULATION OF SCREEN PRINTABLE COBALT NANOPARTICLE INK FOR HIGH FREQUENCY APPLICATIONS
M. Nelo et al.
PROGRESS IN ELECTROMAGNETICS RESEARCH-PIER (2010)
Single-walled carbon nanotubes dispersed in aqueous media via non-covalent functionalization: Effect of dispersant on the stability, cytotoxicity, and epigenetic toxicity of nanotube suspensions
Alla L. Alpatova et al.
WATER RESEARCH (2010)
Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation Stability
Shlomo Magdassi et al.
MATERIALS (2010)
Toward the Development of Printable Nanowire Electronics and Sensors
Zhiyong Fan et al.
ADVANCED MATERIALS (2009)
Microwave Flash Sintering of Inkjet-Printed Silver Tracks on Polymer Substrates
Jolke Perelaer et al.
ADVANCED MATERIALS (2009)
Stretchable Supercapacitors Based on Buckled Single-Walled Carbon Nanotube Macrofilms
Cunjiang Yu et al.
ADVANCED MATERIALS (2009)
Intense pulsed light sintering of copper nanoink for printed electronics
Hak-Sung Kim et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2009)
On the effect of poly(3-hexylthiophene) regioregularity on inkjet printed organic solar cells
Claudia N. Hoth et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Argon plasma sintering of inkjet printed silver tracks on polymer substrates
Ingo Reinhold et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Water-Soluble Graphene Covalently Functionalized by Biocompatible Poly-L-lysine
Changsheng Shan et al.
LANGMUIR (2009)
Polymer solar cells based on inkjet-printed PEDOT:PSS layer
Seung Hun Eom et al.
ORGANIC ELECTRONICS (2009)
All ink-jet-printed carbon nanotube thin-film transistor on a polyimide substrate with an ultrahigh operating frequency of over 5 GHz
Jarrod Vaillancourt et al.
APPLIED PHYSICS LETTERS (2008)
Size effect on the thermodynamic properties of silver nanoparticles
Wenhua Luo et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2008)
Inkjet-printed line morphologies and temperature control of the coffee ring effect
Dan Soltman et al.
LANGMUIR (2008)
Electrical sintering of nanoparticle structures
Mark L. Allen et al.
NANOTECHNOLOGY (2008)
Processable aqueous dispersions of graphene nanosheets
Dan Li et al.
NATURE NANOTECHNOLOGY (2008)
Theoretical study on non-covalent functionalization of armchair carbon nanotube by tetrathiafulvalene molecule
Niya Sa et al.
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES (2008)
High-performance thin-film transistor with 6,13-bis(triisopropylsilylethynyl) pentacene by inkjet printing
Sun Hee Lee et al.
ORGANIC ELECTRONICS (2008)
Stretchable and foldable silicon integrated circuits
Dae-Hyeong Kim et al.
SCIENCE (2008)
Non-covalent anionic porphyrin functionalized multi-walled carbon nanotubes as an optical probe for specific DNA detection
Cheng Zhi Huang et al.
TALANTA (2008)
Aerosol flow through a long micro-capillary: collimated aerosol beam
I. S. Akhatov et al.
MICROFLUIDICS AND NANOFLUIDICS (2008)
Direct ink-jet printing of Ag-Cu nanoparticle and Ag-precursor based electrodes for OFET applications
Stefan Gamerith et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
High-resolution electrohydrodynamic jet printing
Jang-Ung Park et al.
NATURE MATERIALS (2007)
Thermal cure effects on electrical performance of nanoparticle silver inks
Julia R. Greer et al.
ACTA MATERIALIA (2007)
Direct writing of copper conductive patterns by ink-jet printing
Bong Kyun Park et al.
THIN SOLID FILMS (2007)
Polyaniline doped with dimethyl sulfate as a nucleophilic dopant and its electrochemical properties as an electrode in a lithium secondary battery and a redox supercapacitor
Kwang Sun Ryu et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2007)
Polymers as functional components in batteries and fuel cells
Gerhard Wegner
POLYMERS FOR ADVANCED TECHNOLOGIES (2006)
Direct ink-jet printing and low temperature conversion of conductive silver patterns
P. J. Smith et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Inkjet printed silver source/drain electrodes for low-cost polymer thin film transistors
FL Xue et al.
MICROELECTRONIC ENGINEERING (2006)
Size matters: why nanomaterials are different
Emil Roduner
CHEMICAL SOCIETY REVIEWS (2006)
Aerodynamic focusing of nanoparticles: I. Guidelines for designing aerodynamic lenses for nanoparticles
XL Wang et al.
AEROSOL SCIENCE AND TECHNOLOGY (2005)
Formulation and processing of novel conductive solution inks in continuous inkjet printing of 3-D electric circuits
JF Mei et al.
IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING (2005)
Direct patterning of organic light-emitting devices by organic-vapor jet printing
YR Sun et al.
APPLIED PHYSICS LETTERS (2005)
Chemically functionalized carbon nanotubes
K Balasubramanian et al.
SMALL (2005)
High-mobility thin-film transistors based on aligned carbon nanotubes
K Xiao et al.
APPLIED PHYSICS LETTERS (2003)
Patterned low temperature copper-rich deposits using inkjet printing
GG Rozenberg et al.
APPLIED PHYSICS LETTERS (2002)
Functionalized pentacene: Improved electronic properties from control of solid-state order
JE Anthony et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2001)
High performance organic semiconducting thin films: Ink jet printed polythiophene [rr-P3HT]
Stuart P. Speakman et al.
ORGANIC ELECTRONICS (2001)
Advances in the science and technology of carbon nanotubes and their composites: a review
ET Thostenson et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)
Conducting polymers in microelectronics
M Angelopoulos
IBM JOURNAL OF RESEARCH AND DEVELOPMENT (2001)
分享论文
