☆ 4.4 Article

Numerical study on energy absorption characteristics of bio-mimetic multi-cell thin-walled structures with different hierarchy

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Biomedical

Microtensile properties and failure mechanisms of cortical bone at the lamellar level

Daniele Casari et al.

Summary: New experiments on dry ovine bone discovered that microtensile strength at the scale of a single lamella is greater than at the macroscopic level, exhibiting brittleness and strength anisotropy. Analysis suggests that bone strength at the lamellar level is remarkably tolerant to variations of fibril orientation.

ACTA BIOMATERIALIA (2021)

添加到收藏夹

Article Engineering, Mechanical

Crashworthiness performance of concentric structures with different cross-sectional shapes under multiple loading conditions

Sadjad Pirmohammad

Summary: This study evaluates the crashworthiness performance of concentric structures with different numbers of tubes and cross-sectional shapes. The hexagonal structure with two tubes and octagonal, decagonal, and circular structures with three tubes exhibit the best results. Additionally, the decagonal structure with three tubes shows the highest energy absorbing characteristics among all structures studied.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2021)

添加到收藏夹

Article Mechanics

Internally stiffened foam-filled carbon fiber reinforced composite tubes under impact loading for energy absorption applications

Tamer A. Sebaey et al.

Summary: Fiber reinforced plastics filled with polyurethane foam are widely used as energy absorbers for safety enhancement. The study found that using PU foam inside CFRP composite tubes increases peak load and energy absorption, while internal CFRP reinforcements do not significantly improve energy absorption but do improve peak load.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental, numerical, and multi-objective optimization investigations on the energy absorption features of single- and bi-layer deep-drawn cups

Mohammad A. Ghasemabadian et al.

Summary: The energy absorption performance of both S-cups and B-cups exceeds that of tubes with the same mass or height, under quasi-static axial loading.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2021)

添加到收藏夹

Article Engineering, Civil

Low-velocity impact response of tube-reinforced honeycomb sandwich structure

Yunwei Zhang et al.

Summary: By filling the honeycomb holes with metallic tubes, the load carrying capacity and impact resistance of the honeycomb sandwich structure are improved, leading to a more uniform distribution of stresses and deformations. The tube-reinforced structure absorbs impact energy more quickly and significantly reduces front face-sheet deformation.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Multi-objective optimization of crash box filled with three-dimensional cellular structure under multi-angle impact loading

Fangwu Ma et al.

Summary: This study introduces a novel 3-D hexagonal structure-filled crash box with better comprehensive crashworthiness, demonstrating advantages in energy absorption and maximum peak force through experiments and optimized design.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2021)

添加到收藏夹

Article Engineering, Civil

Crushing behaviors of the thin-walled sandwich column under axial load

Yubo Hou et al.

Summary: This paper presents a new design method for the sandwich column, and validates the accuracy of this design method through experiments and numerical analysis. The study finds that the geometrical characteristics of the sandwich column have a significant impact on its crashworthiness. The results show that the sandwich column with specific design parameters has the greatest energy absorption capacity.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

A novel design of thin-walled energy absorption structures with local surface nanocrystallization

Xinsheng Xu et al.

Summary: An efficient energy absorption design using ultrasonic impact surface nanocrystallization treatment is proposed to enhance the crashworthiness of square thin-walled tubes. By optimizing the layout of local surface nanocrystallization, the specific energy absorption can be increased significantly without modifying the tube's configuration or adding mass. Experimental study confirms the effectiveness of this technology in improving the crashworthiness of square thin-walled tubes.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Crashworthiness of circular fiber reinforced plastic tubes filled with composite skeletons/aluminum foam under drop-weight impact loading

Haiyang Yang et al.

Summary: The study demonstrates the potential of CFRP and GFRP in designing lightweight thin-walled energy absorbers. GFRP tubes outperformed CFRP in low-velocity impact tests, while GFRP tubes filled with OS-skeleton showed superior energy absorption characteristics.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Review Polymer Science

Potential of Honeycomb-Filled Composite Structure in Composite Cross-Arm Component: A Review on Recent Progress and Its Mechanical Properties

Abd Latif Amir et al.

Summary: Pultruded glass fiber-reinforced polymer composite structures are widely used in high transmission tower cross-arms, offering better strength and environmental degradation resistance. There are performance failures in existing cross-arm members, but enhancing them with honeycomb-filled composite structures can improve service life.

POLYMERS (2021)

添加到收藏夹

Article Engineering, Mechanical

Impact analysis of a honeycomb-filled motorcycle helmet based on coupled head-helmet modelling

Shunfeng Li et al.

Summary: The study developed a methodology for analyzing a novel motorcycle helmet by coupling head-helmet modeling and kinematic and biomechanical head injury criteria. The research aimed to improve the protective performance of helmets and reduce head injuries through an optimization study on honeycomb filler geometries and liner foam densities. The proposed method can be applied in structural crashworthiness studies where human-structure interaction is crucial.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Energy absorption characteristic of bionic lightweight protective structure with curved tubes under impact loading

Jianxun Du et al.

Summary: The fibrous structure of beetle elytra provides excellent potential for bionic applications in developing crush-resistant materials for automotive passive safety. Through the design and analysis of bionic thin-walled honeycomb structures, the research reveals the energy absorption capacity and collapse process of bionic structures under different conditions.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2021)

添加到收藏夹

Article Engineering, Civil

Axial crushing responses of aluminum honeycomb structures filled with elastomeric polyurethane foam

Yousef Mohamadi et al.

Summary: This study experimentally investigated the energy absorption of elastomeric foam-filled aluminum honeycomb under quasi-static compression loading and low velocity impact. The results revealed that adding glass microballoon particles to the elastomer significantly enhanced energy absorption, increased maximum load, mean crushing load, and total absorbed energy, while showing less deformation compared to conventional filled structures, making it a promising energy absorber.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

Crashworthiness design for multi-cell circumferentially corrugated thin-walled tubes with sub-sections under multiple loading conditions

Emre Isa Albak

Summary: The crashworthiness of thin-walled structures combining multiple cells, corners, and edge-junctions has been examined in this study. Results show that the crash performance improves with an increase in the number of cells, and the finite element model validated for axial loading is predicted to be accurate for oblique loading as well. Various approximation and optimization methods have been utilized to obtain the best crash performance structure.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Crashworthiness enhancement of thin-walled hexagonal tubes under flexural loads by using different stiffener geometries

F. Samer et al.

Summary: The study aimed to enhance the energy absorption of thin-walled hexagonal tubes by using different stiffeners geometries, which showed that the stiffeners improved the crashworthiness parameters and restricted flattening of the structure under compressive loadings. The H-5 stiffener was chosen as the best geometry for improving specific energy absorption and crushing force efficiency.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Multi-cell energy-absorbing structures with hollow columns inspired by the beetle elytra

Jianxun Du et al.

JOURNAL OF MATERIALS SCIENCE (2020)

添加到收藏夹

Article Mechanics

A numerical-experimental assessment on a composite fuselage barrel vertical drop test: Induced damage onset and evolution

A. Riccio et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Engineering, Mechanical

Energy absorption in the axial crushing of hierarchical circular tubes

Dahai Zhang et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Crushing analysis and design optimization for foam-filled aluminum/CFRP hybrid tube against transverse impact

Shunfeng Li et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Engineering, Civil

Flexural and shear characteristics of bio-based sandwich beams made of hollow and foam-filled paper honeycomb cores and flax fiber composite skins

Yuchen Fu et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Civil

Bionic design of thin-walled structure based on the geometry of the vascular bundles of bamboo

Felipe Luis Palombini et al.

THIN-WALLED STRUCTURES (2020)

添加到收藏夹

Article Engineering, Aerospace

Crashworthiness Analysis and Enhancement of Aircraft Structures Under Vertical Impact Scenarios

J. Paz et al.

JOURNAL OF AIRCRAFT (2020)

添加到收藏夹

Article Engineering, Manufacturing

Sensitivity analysis-based variable screening and reliability optimisation for composite fuselage frame crashworthiness design

Binhua Gao et al.

INTERNATIONAL JOURNAL OF CRASHWORTHINESS (2019)

添加到收藏夹

Article Materials Science, Characterization & Testing

A new hybrid approach for reliability-based design optimization of structural components

Emre Demirci et al.

MATERIALS TESTING (2019)

添加到收藏夹

Article Engineering, Civil

Impact energy absorption performances of ordinary and hierarchical chiral structures

Qiuyu Lu et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Engineering, Civil

Mechanical performance of vertex-based hierarchical vs square thin-walled multi-cell structure

Zhonggang Wang et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Engineering, Mechanical

Multi-surrogate-assisted metaheuristics for crashworthiness optimisation

Cho Mar Aye et al.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN (2019)

添加到收藏夹

Article Engineering, Mechanical

Experimental and numerical fatigue-based design optimisation of clutch diaphragm spring in the automotive industry

Alper Karaduman et al.

INTERNATIONAL JOURNAL OF VEHICLE DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties of bio-mimetic energy-absorbing materials under impact loading

Peng Hao et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Mechanics

Numerical and analytical investigation on crushing of fractal-like honeycombs with self-similar hierarchy

Dahai Zhang et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Approaching perfect energy absorption through structural hierarchy

Hualin Fan et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2018)

添加到收藏夹

Article Mechanics

On hierarchical honeycombs under out-of-plane crushing

Jianguang Fang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)

添加到收藏夹

Article Engineering, Biomedical

Energy absorption characteristics of bio-inspired honeycomb column thin walled structure under impact loading

Peng Hao et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)

添加到收藏夹

Article Materials Science, Characterization & Testing

An experimental and numerical investigation of the effects of geometry and spot welds on the crashworthiness of vehicle thin-walled structures

Emre Demirci et al.

MATERIALS TESTING (2018)

添加到收藏夹

Article Materials Science, Characterization & Testing

An investigation of the crash performance of magnesium, aluminum and advanced high strength steels and different cross-sections for vehicle thin walled energy absorbers

Emre Demirci et al.

MATERIALS TESTING (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Investigation on Microstructure of Beetle Elytra and Energy Absorption Properties of Bio-Inspired Honeycomb Thin-Walled Structure under Axial Dynamic Crushing

Jianxun Du et al.

NANOMATERIALS (2018)

添加到收藏夹

Article Engineering, Civil

Crashworthiness of hierarchical circular-joint quadrangular honeycombs

Yaozhong Wu et al.

THIN-WALLED STRUCTURES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical analysis of the impact resistance in aluminum alloy bi-tubular thin-walled structures designs inspired by beetle elytra

Jinwu Xiang et al.

JOURNAL OF MATERIALS SCIENCE (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Energy absorption characteristics of bio-inspired honeycomb structure under axial impact loading

Jinwu Xiang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Review Engineering, Civil

On the crashworthiness performance of thin-walled energy absorbers: Recent advances and future developments

Ahmad Baroutaji et al.

THIN-WALLED STRUCTURES (2017)

添加到收藏夹

Article Engineering, Mechanical

Multiobjective optimization for empty and foam-filled square columns under oblique impact loading

Shu Yang et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

ENERGY ABSORPTION CONTROL CHARACTERISTICS OF AL THIN-WALLED TUBES UNDER IMPACT LOAD

Kil-Sung Lee et al.

ACTA MECHANICA SOLIDA SINICA (2008)

添加到收藏夹

Article Engineering, Civil

Energy absorption of aluminium alloy circular and square tubes under an axial explosive load

D Karagiozova et al.

THIN-WALLED STRUCTURES (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.