相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Mechanical and two-body wear characterization of micro-nano ceramic particulate reinforced dental restorative composite materials
Ramkumar Yadav et al.
POLYMER COMPOSITES (2022)
Comparative investigation of tribological behavior of hybrid dental restorative composite materials
Ramkumar Yadav et al.
CERAMICS INTERNATIONAL (2022)
Analytic hierarchy process-technique for order preference by similarity to ideal solution: A multi criteria decision-making technique to select the best dental restorative composite materials
Ramkumar Yadav
POLYMER COMPOSITES (2021)
Investigation of the physical, mechanical and thermal properties of nano and microsized particulate-filled dental composite material
Ramkumar Yadav et al.
JOURNAL OF COMPOSITE MATERIALS (2020)
Dental restorative composite materials: A review
Ramkumar Yadav et al.
JOURNAL OF ORAL BIOSCIENCES (2019)
Optimization of Process Parameters for SS304 in Wire Electrical Discharge Machining using Taguchi's Technique
G. Ugrasen et al.
MATERIALS TODAY-PROCEEDINGS (2018)
Property enhancement of dental composite prepared with an isosorbide-based photocurable compound by mixing with TEGDMA
Seunghan Shin et al.
EUROPEAN POLYMER JOURNAL (2017)
Fluorinated bis-GMA as potential monomers for dental restorative composite materials
Rohit Srivastava et al.
EUROPEAN POLYMER JOURNAL (2017)
Mechanical properties of polymer-infiltrated-ceramic (sodium aluminum silicate) composites for dental restoration
Bencang Cui et al.
JOURNAL OF DENTISTRY (2017)
Boron nitride nanotubes as novel fillers for improving the properties of dental adhesives
Felipe Weidenbach Degrazia et al.
JOURNAL OF DENTISTRY (2017)
Mechanical performance of polymer-infiltrated zirconia ceramics
Jing Li et al.
JOURNAL OF DENTISTRY (2017)
Synthesis of Al2O3-0.5B2O3-SiO2 fillers by sol-gel method for dental resin composites
Aline Evangelista Aguiar et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2017)
Synergic effect of chitosan and dicalcium phosphate on tricalcium silicate-based nanocomposite for root-end dental application
Fatemeh Panahi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Surface modification of quartz fibres for dental composites through a sol-gel process
Yazi Wang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Fabrication and in vivo evaluation of hydroxyapatite/carbon nanotube electrospun fibers for biomedical/dental application
A. S. Khan et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Mechanical properties of experimental composites with different calcium phosphates fillers
Zuzanna Okulus et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Investigation of the mechanical and chemical characteristics of nanotubular and nano-pitted anodic films on grade 2 titanium dental implant materials
Miklos Weszl et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
Effects of silane-modified fillers on properties of dental composite resin
Aysu Aydinoglu et al.
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2017)
The effect of surface treatment on the friction and wear behavior of dental Y-TZP ceramic against human enamel
M. Buciumeanu et al.
TRIBOLOGY INTERNATIONAL (2017)
Fracture resistance of endodontically treated teeth restored with short fiber composite used as a core material-An in vitro study
Tejesh Gupta Garlapati et al.
JOURNAL OF PROSTHODONTIC RESEARCH (2017)
Fabrication and characterisation of composites materials similar optically and in composition to native dental tissues
P. V. Seredin et al.
RESULTS IN PHYSICS (2017)
Composite resin reinforced with silver nanoparticles-laden hydroxyapatite nanowires for dental application
Miao Ai et al.
DENTAL MATERIALS (2017)
The morphological effect of calcium phosphates as reinforcement in methacrylate-based dental composite resins on mechanical strength through thermal cycling
Yu-Ren Wu et al.
CERAMICS INTERNATIONAL (2017)
Genotoxic potential of dental bulk-fill resin composites
Tobias T. Tauboeck et al.
DENTAL MATERIALS (2017)
Academy of Dental Materials guidance- Resin composites: Part I-Mechanical propertiesN.
N. Ilie et al.
DENTAL MATERIALS (2017)
The effects of different opacifiers on the translucency of experimental dental composite resins Original Research Article
Karine Haas et al.
DENTAL MATERIALS (2017)
Graphene for the development of the next-generation of biocomposites for dental and medical applications
Han Xie et al.
DENTAL MATERIALS (2017)
Mechanical behavior of bulk direct composite versus block composite and lithium disilicate indirect Class II restorations by CAD-FEM modeling
Pietro Ausiello et al.
DENTAL MATERIALS (2017)
Experimental investigation and optimization of impinging jet solar thermal collector by Taguchi method
Ranchan Chauhan et al.
APPLIED THERMAL ENGINEERING (2017)
Effect of nanoclay addition on physical, chemical, optical and biological properties of experimental dental resin composites
Tais Munhoz et al.
DENTAL MATERIALS (2017)
Biocompatibility of polymer-infiltrated-ceramic-network (PICN) materials with Human Gingival Keratinocytes (HGKs)
Charlotte Grenade et al.
DENTAL MATERIALS (2017)
Immunomodulatory/anti-inflammatory effect of ZOE-based dental materials
Jung-Hwan Leea et al.
DENTAL MATERIALS (2017)
Equivalent Young's modulus of composite resin for simulation of stress during dental restoration
Jung-Hoon Park et al.
DENTAL MATERIALS (2017)
Mesoporous silica fillers and resin composition effect on dental composites cytocompatibility
Nina Attik et al.
DENTAL MATERIALS (2017)
Highly wear-resistant and biocompatible carbon nanocomposite coatings for dental implants
Oleksiy V. Penkov et al.
BIOMATERIALS (2016)
Antibacterial activity of resin composites containing surface pre-reacted glass-ionomer (S-PRG) filler
Saeki Miki et al.
DENTAL MATERIALS (2016)
Effect of curing light emission spectrum on the nanohardness and elastic modulus of two bulk-fill resin composites
Yaser Issa et al.
DENTAL MATERIALS (2016)
Biaxial flexural strength of new Bis-GMA/TEGDMA based composites with different fillers for dental applications
Sebastian Wille et al.
DENTAL MATERIALS (2016)
Graphene oxide-based substrate: physical and surface characterization, cytocompatibility and differentiation potential of dental pulp stem cells
Vinicius Rosa et al.
DENTAL MATERIALS (2016)
Correlation of shear and dielectric ion viscosity of dental resins - Influence of composition, temperature and filler content
Johannes Steinhaus et al.
DENTAL MATERIALS (2016)
Stability of initiation systems in acidic photopolymerizable dental material
Carine T. W. Meereis et al.
DENTAL MATERIALS (2016)
New acid BisGMA analogs for dental adhesive applications with antimicrobial activity
Violeta Melinte et al.
DENTAL MATERIALS (2016)
Novel rechargeable calcium phosphate dental nanocomposite
Ling Zhang et al.
DENTAL MATERIALS (2016)
Potential confounders of bisphenol-a analysis in dental materials
Esther Hope et al.
DENTAL MATERIALS (2016)
Impedance changes during setting of amorphous calcium phosphate composites
Matej Par et al.
DENTAL MATERIALS (2016)
Influence of nanogel additive hydrophilicity on dental adhesive mechanical performance and dentin bonding
Valeria B. Gotti et al.
DENTAL MATERIALS (2016)
Shrinkage behaviors of dental composite restorations-The experimental-numerical hybrid analysis
Shu-Fen Chuang et al.
DENTAL MATERIALS (2016)
Effect of loading configuration on strength values in a highly transformable zirconia-based composite
Imane Touaiher et al.
DENTAL MATERIALS (2016)
Wear, strength, modulus and hardness of CAD/CAM restorative materials
Nathaniel C. Lawson et al.
DENTAL MATERIALS (2016)
Boron-doped diamond powder (BDDP)-based polymer composites for dental treatment using flexible pinpoint electrolysis unit
Tsuyoshi Ochiai et al.
ELECTROCHEMISTRY COMMUNICATIONS (2016)
Synthesis and characterization of new composite materials based on poly(methacrylic acid) and hydroxyapatite with applications in dentistry
Andrei Tiberiu Cucuruz et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2016)
Microshear bond strength to dentin of self-adhesive flowable composite compared with total-etch and all-in-one adhesives
Chonlaya Bumrungruan et al.
JOURNAL OF DENTAL SCIENCES (2016)
Mechanical and structural characterization of discontinuous fiber-reinforced dental resin composite
Jasmina Bijelic-Donova et al.
JOURNAL OF DENTISTRY (2016)
Two-body wear performance of dental colored zirconia after different surface treatments
Yunyang Bai et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Comparative in vitro wear resistance of CAD/CAM composite resin and ceramic materials
Li Zhi et al.
JOURNAL OF PROSTHETIC DENTISTRY (2016)
Polishing mechanism of light-initiated dental composite: Geometric optics approach
Yu-Chih Chiang et al.
JOURNAL OF THE FORMOSAN MEDICAL ASSOCIATION (2016)
Dental glass ionomer cement reinforced by cellulose microfibers and cellulose nanocrystals
Rafael M. Silva et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
A new fluorinated urethane dimethacrylate with carboxylic groups for use in dental adhesive compositions
Tinca Buruiana et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Improved performance of Bis-GMA/TEGDMA dental composites by net-like structures formed from SiO2 nanofiber fillers
Xiaoyan Wang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Physicochemical characterization of three fiber-reinforced epoxide-based composites for dental applications
Anderson J. Bonon et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Preparation and characterization of new dental porcelains, using K-feldspar and quartz raw materials. Effect of B2O3 additions on sintering and mechanical properties
Abdelhamid Harabi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
VIKOR Technique: A Systematic Review of the State of the Art Literature on Methodologies and Applications
Abbas Mardani et al.
SUSTAINABILITY (2016)
Design and development of self-healing dental composites
George Huyang et al.
MATERIALS & DESIGN (2016)
Interactions of liposomes with dental restorative materials
Sanko Nguyen et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2015)
Effect of Opalescence® bleaching gels on the elution of dental composite components
Lena Schuster et al.
DENTAL MATERIALS (2015)
Validity of predictive models of stress relaxation in selected dental polymers
Tritala K. Vaidyanathan et al.
DENTAL MATERIALS (2015)
Ultra-high-molecular-weight polyethylene fiber reinforced dental composites: Effect of fiber surface treatment on mechanical properties of the composites
Niloofar Bahramian et al.
DENTAL MATERIALS (2015)
Formation of functionalized nanoclusters by solvent evaporation and their effect on the physicochemical properties of dental composite resins
Henry A. Rodriguez et al.
DENTAL MATERIALS (2015)
Mechanical properties and ion release from bioactive restorative composites containing glass fillers and calcium phosphate nano-structured particles
Marina D. S. Chiari et al.
DENTAL MATERIALS (2015)
A systematic review about antibacterial monomers used in dental adhesive systems: Current status and further prospects
Alexandra Rubin Cocco et al.
DENTAL MATERIALS (2015)
Anti-biofilm activity of zinc oxide and hydroxyapatite nanoparticles as dental implant coating materials
Elham H. Abdulkareem et al.
JOURNAL OF DENTISTRY (2015)
Effect of elasticity on stress distribution in CAD/CAM dental crowns: Glass ceramic vs. polymer-matrix composite
Yuanyuan Duan et al.
JOURNAL OF DENTISTRY (2015)
Two-body wear comparison of zirconia crown, gold crown, and enamel against zirconia
Min-Seok Kwon et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Synthesis of fluorinated dimethacrylate monomer and its application in preparing Bis-GMA free dental resin
Mei Yin et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Effect of random/aligned nylon-6/MWCNT fibers on dental resin composite reinforcement
Alexandre L. S. Borges et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)
Core-sheath zirconia/silica microfibers for dental composites reinforcement
Shibao Li et al.
MATERIALS LETTERS (2015)
Fabrication and characterization of bioactive and antibacterial composites for dental applications
Xanthippi Chatzistavrou et al.
ACTA BIOMATERIALIA (2014)
Strong and bioactive dental resin composite containing poly(Bis-GMA) grafted hydroxyapatite whiskers and silica nanoparticles
Fengwei Liu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
A urethane-based multimethacrylate mixture and its use in dental composites with combined high-performance properties
Gedalias C. Martim et al.
DENTAL MATERIALS (2014)
Dielectric analysis of depth dependent curing behavior of dental resin composites
Johannes Steinhaus et al.
DENTAL MATERIALS (2014)
Reinforcement of experimental composite materials based on amorphous calcium phosphate with inert fillers
Danijela Marovic et al.
DENTAL MATERIALS (2014)
Structural and dynamical studies of acid-mediated conversion in amorphous-calcium-phosphate based dental composites
Fan Zhang et al.
DENTAL MATERIALS (2014)
Preparation and characterization of bioactive composites and fibers for dental applications
Maryam Qidwai et al.
DENTAL MATERIALS (2014)
Synthesis of none Bisphenol A structure dimethacrylate monomer and characterization for dental composite applications
Xiaoxu Liang et al.
DENTAL MATERIALS (2014)
Mechanical fatigue degradation of ceramics versus resin composites for dental restorations
Renan Belli et al.
DENTAL MATERIALS (2014)
Thiol-ene functionalized siloxanes for use as elastomeric dental impression materials
Megan A. Cole et al.
DENTAL MATERIALS (2014)
Mechanisms of setting reactions and interfacial behavior of a nano-filled resin-modified glass ionomer
Afshin Falsafi et al.
DENTAL MATERIALS (2014)
The effect of different surface treatments on the bond strength of PEEK composite materials
Li Zhou et al.
DENTAL MATERIALS (2014)
Chipping fracture resistance of dental CAD/CAM restorative materials: Part I - Procedures and results
G. D. Quinn et al.
DENTAL MATERIALS (2014)
Effect of layered double hydroxide intercalated with fluoride ions on the physical, biological and release properties of a dental composite resin
Loredana Tammaro et al.
JOURNAL OF DENTISTRY (2014)
In vitro investigation of coupling-agent-free dental restorative composite based on nano-porous alumina fillers
Sanjay B. Thorat et al.
JOURNAL OF DENTISTRY (2014)
Wear of enamel opposing zirconia and lithium disilicate after adjustment, polishing and glazing
Nathaniel C. Lawson et al.
JOURNAL OF DENTISTRY (2014)
WEAR OF HUMAN ENAMEL OPPOSING MONOLITHIC ZIRCONIA, GLASS CERAMIC, AND COMPOSITE RESIN: AN IN VITRO STUDY
Jeerapa Sripetchdanond et al.
JOURNAL OF PROSTHETIC DENTISTRY (2014)
WEAR BEHAVIOR OF HUMAN ENAMEL AGAINST LITHIUM DISILICATE GLASS CERAMIC AND TYPE III GOLD
Ahreum Lee et al.
JOURNAL OF PROSTHETIC DENTISTRY (2014)
High energy X-ray diffraction study of a dental ceramics-titanium functional gradient material prepared by field assisted sintering technique
K. Witte et al.
MATERIALS CHARACTERIZATION (2014)
Effects of surface treatment on bond strength between dental resin agent and zirconia ceramic
Ashkan Moradabadi et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Synthesis of iodine-containing cyclophosphazenes for using as radiopacifiers in dental composite resin
Yuchen Zhao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2014)
Extension of VIKOR method for decision making problem based on hesitant fuzzy set
Nian Zhang et al.
APPLIED MATHEMATICAL MODELLING (2013)
Extension of VIKOR method for multi-criteria group decision making problem with linguistic information
Yanbing Ju et al.
APPLIED MATHEMATICAL MODELLING (2013)
Fabrication and characterization of biomimetic ceramic/polymer composite materials for dental restoration
Morena Petrini et al.
DENTAL MATERIALS (2013)
A comparison of the mechanical properties of a modified silorane based dental composite with those of commercially available composite material
Muhammad Zakir et al.
DENTAL MATERIALS (2013)
Progress in dimethacrylate-based dental composite technology and curing efficiency
Julian G. Leprince et al.
DENTAL MATERIALS (2013)
Evaluation of fracture toughness and mechanical properties of ternary thiol-ene-methacrylate systems as resin matrix for dental restorative composites
Saeed Beigi et al.
DENTAL MATERIALS (2013)
Photo-polymerization efficiency of self-etch dental adhesives composed of camphorquinone or trimethylbenzoyl-diphenyl-phosphine oxide
Ningjing Wu et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)
Micromechanical analysis of nanoparticle-reinforced dental composites
Yi Hua et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2013)
Temperature-dependence of creep behaviour of dental resin-composites
S. El-Safty et al.
JOURNAL OF DENTISTRY (2013)
Degree of conversion and microhardness of dental composite resin materials
D. Marovic et al.
JOURNAL OF MOLECULAR STRUCTURE (2013)
THE WEAR OF POLISHED AND GLAZED ZIRCONIA AGAINST ENAMEL
Sridhar Janyavula et al.
JOURNAL OF PROSTHETIC DENTISTRY (2013)
TWO-BODY WEAR RATE OF CAD/CAM RESIN BLOCKS AND THEIR ENAMEL ANTAGONISTS
Bogna Stawarczyk et al.
JOURNAL OF PROSTHETIC DENTISTRY (2013)
Wear characteristics of current aesthetic dental restorative CAD/CAM materials: Two-body wear, gloss retention, roughness and Martens hardness
Werner H. Moermann et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2013)
Synthesis and characterization of cross-linked polymeric nanoparticles and their composites for reinforcement of photocurable dental resin
Melinda Szaloki et al.
REACTIVE & FUNCTIONAL POLYMERS (2013)
Taguchi Method Approach on Effect of Lubrication Condition on Surface Roughness in Milling Operation
Mohamad Syahmi Shahrom et al.
MALAYSIAN TECHNICAL UNIVERSITIES CONFERENCE ON ENGINEERING & TECHNOLOGY 2012 (MUCET 2012) (2013)
Repair of silorane-based dental composites: Influence of surface treatments
Naho Hamano et al.
DENTAL MATERIALS (2012)
Correlation of the degree of conversion with the amount of elutable substances in nano-hybrid dental composites
Juergen Durner et al.
DENTAL MATERIALS (2012)
Mechanical properties of hydroxyapatite whisker-reinforced bis-GMA-based resin composites
Hongquan Zhang et al.
DENTAL MATERIALS (2012)
Nano-porous thermally sintered nano silica as novel fillers for dental composites
Mohammad Atai et al.
DENTAL MATERIALS (2012)
Wear behavior of dental Y-TZP ceramic against natural enamel after different finishing procedures
Gergo Mitov et al.
DENTAL MATERIALS (2012)
Novel dental composites reinforced with zirconia-silica ceramic nanofibers
Guangqing Guo et al.
DENTAL MATERIALS (2012)
Nanomechanical properties of dental resin-composites
S. El-Safty et al.
DENTAL MATERIALS (2012)
Synthesis and evaluation of new phosphonic, bisphosphonic and difluoromethylphosphonic acid monomers for dental application
Yohann Catel et al.
EUROPEAN POLYMER JOURNAL (2012)
Wear evaluation of the human enamel opposing different Y-TZP dental ceramics and other porcelains
Mi-Jin Kim et al.
JOURNAL OF DENTISTRY (2012)
Friction and wear behaviors of dental ceramics against natural tooth enamel
Lin Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Nano grain sized zirconia-silica glass ceramics for dental applications
Cecilia Persson et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2012)
Wear performance of dental ceramics after grinding and polishing treatments
Verena Preis et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2012)
Synthesis of dental resins using diatomite and nano-sized SiO2 and TiO2
Xiaoli Miao et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2012)
The effect of composition of calcium phosphate composite scaffolds on the formation of tooth tissue from human dental pulp stem cells
Liqin Zheng et al.
BIOMATERIALS (2011)
Wear performance of substructure ceramics and veneering porcelains
Verena Preis et al.
DENTAL MATERIALS (2011)
Synthesis and characterization of acetyloxypropylene dimethacrylate as a new dental monomer
Maciej Podgorski
DENTAL MATERIALS (2011)
Synthesis and study of properties of dental resin composites with different nanosilica particles size
Maria M. Karabela et al.
DENTAL MATERIALS (2011)
BisGMA/TEGDMA dental composite containing high aspect-ratio hydroxyapatite nanofibers
Liang Chen et al.
DENTAL MATERIALS (2011)
Improving some selected properties of dental polyacid-modified composite resins
Paul J. Milward et al.
DENTAL MATERIALS (2011)
Improving performance of dental resins by adding titanium dioxide nanoparticles
Jirun Sun et al.
DENTAL MATERIALS (2011)
Physical properties of current dental nanohybrid and nanofill light-cured resin composites
Irini D. Sideridou et al.
DENTAL MATERIALS (2011)
Characterization of dimethacrylate polymeric networks: A study of the crosslinked structure formed by monomers used in dental composites
Carmem S. Pfeifer et al.
EUROPEAN POLYMER JOURNAL (2011)
Two-body wear of dental restorative materials
Sebastian Hahnel et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2011)
Mechanical and dry sliding wear characterization of epoxy-TiO2 particulate filled functionally graded composites materials using Taguchi design of experiment
Siddhartha et al.
MATERIALS & DESIGN (2011)
Mechanical properties of dental resin composites by co-filling diatomite and nanosized silica particles
Hua Wang et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2011)
Influence of LED irradiance on flexural properties and Vickers hardness of resin-based composite materials
G. S. Bhamra et al.
DENTAL MATERIALS (2010)
Effect of liquid rubber additions on physical properties of Bis-GMA based dental resins
Francis K. Mante et al.
DENTAL MATERIALS (2010)
Post-draw PAN-PMMA nanofiber reinforced and toughened Bis-GMA dental restorative composite
Wei Sun et al.
DENTAL MATERIALS (2010)
Hydroxyapatite nanorods as novel fillers for improving the properties of dental adhesives: Synthesis and application
Mehdi Sadat-Shojai et al.
DENTAL MATERIALS (2010)
Development of novel dental nanocomposites reinforced with polyhedral oligomeric silsesquioxane (POSS)
Xiaorong Wu et al.
DENTAL MATERIALS (2010)
Contraction stress of low-shrinkage composite materials assessed with different testing systems
Giulio Marchesi et al.
DENTAL MATERIALS (2010)
Surface deterioration of dental materials after simulated toothbrushing in relation to brushing time and load
S. D. Heintze et al.
DENTAL MATERIALS (2010)
In vitro photosensitization initiated by camphorquinone and phenyl propanedione in dental polymeric materials
Terje Christensen et al.
JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY B-BIOLOGY (2010)
TWO-BODY WEAR OF DIFFERENT CERAMIC MATERIALS OPPOSED TO ZIRCONIA CERAMIC
Zakereyya S. M. Albashaireh et al.
JOURNAL OF PROSTHETIC DENTISTRY (2010)
Influence of nano- and micro-filler proportions on the optical property stability of experimental dental resin composites
Bin Yu et al.
MATERIALS & DESIGN (2010)
Extension of VIKOR method for decision making problem with interval numbers
Mohammad Kazem Sayadi et al.
APPLIED MATHEMATICAL MODELLING (2009)
PMMA-grafted nanoclay as novel filler for dental adhesives
Mohammad Atai et al.
DENTAL MATERIALS (2009)
Influence of halogen irradiance on short- and long-term wear resistance of resin-based composite materials
Gurcharn S. Bhamra et al.
DENTAL MATERIALS (2009)
Influence of thermal expansion on shrinkage during photopolymerization of dental resins based on bis-GMA/TEGDMA
Veronica Mucci et al.
DENTAL MATERIALS (2009)
Macro-, micro- and nano-mechanical investigations on silorane and methacrylate-based composites
Nicoleta Ilie et al.
DENTAL MATERIALS (2009)
Calcium and phosphate ion releasing composite: Effect of pH on release and mechanical properties
Hockin H. K. Xu et al.
DENTAL MATERIALS (2009)
Effect of porous glass-ceramic fillers on mechanical properties of light-cured dental resin composites
Yong Liu et al.
DENTAL MATERIALS (2009)
Effect of resin matrix composition on the translucency of experimental dental composite resins
Natasha Azzopardi et al.
DENTAL MATERIALS (2009)
Effect of the amount of 3-methacyloxypropyltrimethoxysilane coupling agent on physical properties of dental resin nanocomposites
Irini D. Sideridou et al.
DENTAL MATERIALS (2009)
Fatigue behaviour of dental composite materials
James L. Drummond et al.
JOURNAL OF DENTISTRY (2009)