☆ 4.7 Article

Nonisothermal crystallization behavior and mechanical properties of poly(lactic acid)/ramie fiber biocomposites

POLYMER COMPOSITES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Composites

Mechanical, thermal and microstructural studies of Bauhinia Vahlii fiber reinforced polypropylene composite

Rashmi Ray et al.

Summary: In this study, thermoplastic polymers were reinforced with surface-modified BV fibers, resulting in the highest tensile and flexural strength at 10 wt% BV fiber content, indicating a strong interfacial bond. The impact strength and hardness of the BV/PP composite increased with the BV fiber loading.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Composites

Properties enhancement of chitosan-filled polylactic acid biocomposites using tannic acid treatment

Nor Helya Iman Kamaludin et al.

Summary: In this study, tannic acid-treated chitosan-filled polylactic acid biocomposites were prepared and characterized. The addition of tannic acid and chitosan improved the physical properties of the materials, promoted crystallization, and enhanced thermal stability.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Composites

Effect of manufacturing processes and multi-walled carbon nanotube loading on mechanical and dynamic properties of glass fiber reinforced composites

Thulasidhas Dhilipkumar et al.

Summary: The current study investigates the combined effect of carbon nanotube reinforcement and manufacturing methods on the mechanical and vibrational behavior of composite materials. The results demonstrate that the co-curing manufacturing method with 1% weight fraction of CNTs improves the tensile strength, while the secondary bonding method with 0.25% weight fraction of CNTs provides the highest flexural strength. Modal analysis reveals that the selection of appropriate manufacturing techniques and CNT weight fractions can enhance both the mechanical properties and vibrational characteristics of the composites.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Composites

Improving mechanical toughness and mold resistance of bamboo/high-density polyethylene composites by pretreatment with the fungus Trametes versicolor

Xin Liu et al.

Summary: In this study, bamboo-plastic composites (BPCs) were modified using the white-rot fungus Trametes versicolor, resulting in improved elongation at break, impact strength, and mold resistance. The enhanced mechanical toughness was attributed to the selective removal of lignin, increased specific surface areas, and enhanced mechanical interlocking. Furthermore, the bioprocess efficiently improved the mold resistance of BPCs, providing a new eco-friendly method for outdoor living structures.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Composites

In vitro and mechanical characterization of PLA/egg shell biocomposite scaffold manufactured using fused deposition modeling technology for tissue engineering applications

Sivagnanamani Gnanamani Sankaravel et al.

Summary: This research focused on the utilization of natural biomaterial egg shell particles (ESP) as a filler material in PLA composite scaffolds. The study found that an increase in filler particles led to a significant reduction in water contact angle, and the performance varied at different filling percentages and porosities.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Composites

Functionalized graphene nanoplatelets/poly (lactic acid)/chitosan nanocomposites: Mechanical, biodegradability, and electrical conductivity properties

Azin Paydayesh et al.

Summary: The addition of 3 phr FGNP to the PLA/CS blend resulted in a nanocomposite with superior properties, including significantly improved tensile strength and thermal stability, as well as a fine morphology and size distribution. The weight loss rate increased over time due to the decrease in degradable functional groups, while the electrical and thermal conductivity showed significant enhancements.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Composites

Evaluation of conductivity and mechanical properties of natural fiber reinforced soy-melamine formaldehyde based green composite

Ajaya Kumar Behera et al.

Summary: Jute-based green composite prepared with melamine formaldehyde modified soy resin exhibited improved tensile strength, reduced water absorption, enhanced surface electrical insulation and fire retardance properties, and demonstrated biodegradability, making it a potential alternative to non-degradable plastics in various industrial sectors.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Composites

Coconut waste fiber used as brake pad reinforcement polymer composite and compared to standard Kevlar-based brake pads to produce an asbestos free brake friction material

Sarafat Ali et al.

Summary: The awareness of eco-friendly materials has increased the demand for natural fibers. Coconut fiber, as a natural fiber, has been used in brake pads as a brake friction material. The study analyzed the effects of different percentages of coconut fiber on the performance of brake pads.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Composites

Vibrational analysis of glass/ramie fiber reinforced hybrid polymer composite

Chenniappan Thiyagu et al.

Summary: This research investigates the impacts of surface treatment and the number of ramie fiber layers on the vibrational and mechanical characteristics of a glass/ramie fiber reinforced hybrid polymer composite. The study found that hybridization and NaOH pre-treatment to a certain ratio can increase the mechanical strength of the hybrid composite compared to natural fiber composites.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Polymer Science

Tailoring the thermal and mechanical properties of injection-molded poly (lactic acid) parts through annealing

Guili Li et al.

Summary: The effect of cold-crystallization on poly (lactic acid) injection-molded parts was systematically studied under different annealing temperatures and times. By analyzing the relative crystallinity and crystal form, it was found that annealing can effectively improve the thermal and mechanical properties of PLA products, with significant enhancements in tensile strength observed especially after annealing at 80 degrees Celsius for 2 hours.

JOURNAL OF APPLIED POLYMER SCIENCE (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Poly(lactic acid)/poly(butylene succinate) dual-layer membranes with cellulose nanowhisker for heavy metal ion separation

Lau Kia Kian et al.

Summary: Dual-layer membranes of poly(lactic acid) and poly(butylene succinate) filled with cellulose nanowhisker were fabricated for removing metal ions from wastewater. The addition of nanowhisker improved membrane porosity and filtration performance, but could affect heat resistance. In continuous operation tests, the 3% CNW filled membrane showed the highest removal efficiency for cobalt and nickel metal ions.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2021)

添加到收藏夹

Article Materials Science, Composites

Mechanical and nonisothermal cold crystallization behaviors of injection molded surface-modified chitin whiskers/poly(l-lactide) composites

Wei Wen et al.

Summary: By introducing surface-grafted chitin whiskers via melt blending, the mechanical and crystallization performances of PLLA were improved. The whiskers acted as nucleating agents to promote PLLA crystallization and as obstacles to restrict crystal growth, with grafted chitin whiskers showing a more obvious promotion effect compared to pristine chitin whiskers.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Materials Science, Composites

A study about silane modification and interfacial ultraviolet aging of hemp fiber reinforced polypropylene composites

Hong Chang Han et al.

Summary: The study focused on the impact of silane modification of hemp fiber on the UV aging of reinforced polypropylene composites, with different silane agents showing varying effects on the degradation and mechanical properties of the composites.

POLYMER COMPOSITES (2021)

添加到收藏夹

Article Construction & Building Technology

A comprehensive overview of jute fiber reinforced cementitious composites

Hongwei Song et al.

Summary: The study highlights the positive impact of adding jute fibers to cementitious composites in enhancing mechanical properties, while emphasizing the importance of controlling fiber length and content. Currently, practical applications of jute fiber reinforced cementitious composites are limited, indicating a need for further research to explore their potential in civil engineering construction.

CASE STUDIES IN CONSTRUCTION MATERIALS (2021)

添加到收藏夹

Article Engineering, Chemical

Fracture and Orientation of Long-Glass-Fiber-Reinforced Polypropylene During Injection Molding

Xu-Qin Hou et al.

POLYMER ENGINEERING AND SCIENCE (2020)

添加到收藏夹

Article Polymer Science

Influence of structure gradients in injection moldings of isotactic polypropylene on their mechanical properties

Nasir Mahmood et al.

POLYMER (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Strong and thermal-resistance glass fiber-reinforced polylactic acid (PLA) composites enabled by heat treatment

Guilong Wang et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)

添加到收藏夹

Article Polymer Science

Why Is Crystalline Poly(lactic acid) Brittle at Room Temperature?

Masoud Razavi et al.

MACROMOLECULES (2019)

添加到收藏夹

Article Engineering, Chemical

Crystallization of polyamide 11 during injection molding

Katalee Jariyavidyanont et al.

POLYMER ENGINEERING AND SCIENCE (2018)

添加到收藏夹

Article Polymer Science

Effect of wood flour as nucleating agent on the isothermal crystallization of poly(lactic acid)

Wendi Wu et al.

POLYMERS FOR ADVANCED TECHNOLOGIES (2017)

添加到收藏夹

Review Construction & Building Technology

A review on dynamic mechanical properties of natural fibre reinforced polymer composites

N. Saba et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

添加到收藏夹

Article Polymer Science

Effects of nanoclay and its localization on the morphology stabilization of PLA/PBAT blends under shear flow

M. Nofar et al.

POLYMER (2016)

添加到收藏夹

Article Materials Science, Composites

Effects of Hybrid Nucleating Agents on Glass Fiber-Reinforced Polyethylene Terephthalate/Polybutylene Terephthalate Alloy Crystallization

Jie-Hui Fu et al.

POLYMER COMPOSITES (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Overcoming the Fundamental Challenges in Improving the Impact Strength and Crystallinity of PLA Biocomposites: Influence of Nucleating Agent and Mold Temperature

Vidhya Nagarajan et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tailoring Crystallization: Towards High-Performance Poly(lactic acid)

Guoming Liu et al.

ADVANCED MATERIALS (2014)

添加到收藏夹

Article Polymer Science

Effect of low-concentration alkali solution pretreatment on the properties of bamboo particles reinforced poly(lactic acid) composites

Shaoping Qian et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2013)

添加到收藏夹

Article Biochemistry & Molecular Biology

Easy alignment and effective nucleation activity of ramie fibers in injection-molded poly(lactic acid) biocomposites

Huan Xu et al.

BIOPOLYMERS (2012)

添加到收藏夹

Article Engineering, Manufacturing

Transcrystallization behavior at the poly(lactic acid)/sisal fibre biocomposite interface

Yaming Wang et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

添加到收藏夹

Article Engineering, Manufacturing

Effect of fiber surface-treatments on the properties of poly(lactic acid)/ramie composites

Tao Yu et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Biodegradable green composites reinforced by the fiber recycling from disposable chopsticks

Yeng-Fong Shih et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Thermodynamics

Isothermal and non-isothermal crystallization kinetics of modified rape straw flour/high-density polyethylene composites

Peng Zou et al.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2009)

添加到收藏夹

Article Materials Science, Characterization & Testing

Mechanical properties of polypropylene/natural fiber composites: Comparison of wood fiber and cotton fiber

Sam-Jung Kim et al.

POLYMER TESTING (2008)

添加到收藏夹

Article Polymer Science

Composites of poly(L-lactide) with hemp fibers: Morphology and thermal and mechanical properties

Robert Masirek et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2007)

添加到收藏夹

Article Engineering, Manufacturing

The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene. 6. The properties of injection moulded long fibre PP at high fibre content

JL Thomason

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.