相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Synthesis of carbon nanotube reinforced Al matrix composite coatings via cold spray deposition
Xinliang Xie et al.
SURFACE & COATINGS TECHNOLOGY (2021)
Direct growth of multiwall carbon nanotube on metal catalyst by chemical vapor deposition: In situ nucleation
Iraj Hasanzadeh et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Study of the mechanical and workability properties of extruded aluminium (Al6061) based composites reinforced with MWCNTs
J. S. S. Babu et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Carbon nanotubes reinforced aluminum matrix composites with high elongation prepared by flake powder metallurgy
N. Y. Li et al.
DIAMOND AND RELATED MATERIALS (2020)
Fabrication of ultra-light LM13 alloy hybrid foam reinforced by MWCNTs and SiC through stir casting technique
B. N. Yadav et al.
MATERIALS LETTERS (2020)
Effect of single wall carbon nanotubes on strength properties of aluminum composite produced by spark plasma sintering and extrusion
Artjom V. Alekseev et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Investigation on mechanical, wear, and machining characteristics of Al 7075/MWCNTs using the liquid state method
S. Suresh et al.
ADVANCED COMPOSITES AND HYBRID MATERIALS (2020)
Synthesis of CNTs on stainless steel microfibrous composite by CVD: Effect of synthesis condition on carbon nanotube growth and structure
Yi Yang et al.
COMPOSITES PART B-ENGINEERING (2019)
Microstructure and mechanical properties of ABOw and nickel-coated MWCNTs reinforced 2024Al hybrid composite fabricated by squeeze casting
Mingfang Qian et al.
MATERIALS CHEMISTRY AND PHYSICS (2019)
Optimisation of mechanical stir casting parameters for fabrication of carbon nanotubes-aluminium alloy composite through Taguchi method
Hashim Hanizam et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
A review on the production of metal matrix composites through stir casting - Furnace design, properties, challenges, and research opportunities
Ramanathan Arunachalam et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Production of carbon nanotubes on bio-char at low temperature via microwave-assisted CVD using Ni catalyst
Jian Zhang et al.
DIAMOND AND RELATED MATERIALS (2019)
On the mechanical properties of functionally graded materials reinforced by carbon nanotubes
Saeed Rouhi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2018)
Microstructure, microhardness and thermal expansion of CNT/Al composites prepared by flake powder metallurgy
Pham Van Trinh et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2018)
Microstructure evolution and mechanical properties of carbon nanotubes reinforced Al matrix composites
Xiaoqing Liu et al.
MATERIALS CHARACTERIZATION (2017)
Microstructures and mechanical properties of carbon nanotubes reinforced pure aluminum composites synthesized by spark plasma sintering and hot rolling
Baisong Guo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Balanced strength and ductility in CNT/A1 composites achieved by flake powder metallurgy via shift-speed ball milling
Run Xu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2017)
Corrosion behaviour of Aluminium Metal Matrix reinforced with Multi-wall Carbon Nanotube
P. S. Samuel Ratna Kumar et al.
JOURNAL OF ASIAN CERAMIC SOCIETIES (2017)
Synthesis and characterization of dual particle (MWCT+B4C) reinforced sintered hybrid aluminum matrix composites
S. Dhandapani et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2016)
Mechanical and thermal properties of nanocarbon-reinforced aluminum matrix composites at elevated temperatures
S. E. Shin et al.
COMPOSITES PART B-ENGINEERING (2016)
Fabrication of carbon nanotube reinforced A356 nanocomposites
Hong Yan et al.
JOURNAL OF MATERIALS RESEARCH (2016)
Dry sliding wear investigation of A16082/Gr metal matrix composites by response surface methodology
Pardeep Sharma et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2016)
Fabrication of Al5083 surface composites reinforced by CNTs and cerium oxide nano particles via friction stir processing
S. A. Hosseini et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Synthesis of carbon nanotubes by the laser ablation method: Effect of laser wavelength
Justyna Chrzanowska et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2015)
Arc discharge synthesis of carbon nanotubes: Comprehensive review
Neha Arora et al.
DIAMOND AND RELATED MATERIALS (2014)
Microstructure and Mechanical Properties of MWCNTs Reinforced A356 Aluminum Alloys Cast Nanocomposites Fabricated by Using a Combination of Rheocasting and Squeeze Casting Techniques
Abou Bakr Elshalakany et al.
JOURNAL OF NANOMATERIALS (2014)
In-situ homogeneous synthesis of carbon nanotubes on aluminum matrix and properties of their composites
Hai-peng Li et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)
Current understanding of the growth of carbon nanotubes in catalytic chemical vapour deposition
Vincent Jourdain et al.
CARBON (2013)
Fabrication of A356 aluminum alloy matrix composite with CNTs/Al2O3 hybrid reinforcements
H. H. Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Distribution and stability of carbon nanotubes during multi-pass friction stir processing of carbon nanotube/aluminum composites
Hossein Izadi et al.
CARBON (2012)
The use of flake powder metallurgy to produce carbon nanotube (CNT)/aluminum composites with a homogenous CNT distribution
Lin Jiang et al.
CARBON (2012)
The effect of milling conditions on microstructures and mechanical properties of Al/MWCNT composites
H. J. Choi et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Continuous synthesis of carbon nanotubes using a metal-free catalyst by CVD
Xiangju Xu et al.
MATERIALS CHEMISTRY AND PHYSICS (2012)
Improving the wettability of aluminum on carbon nanotubes
Kang Pyo So et al.
ACTA MATERIALIA (2011)
Microstructure and Properties of Spark Plasma Sintered Carbon Nanotube Reinforced Aluminum Matrix Composites
Vineet Yadav et al.
ADVANCED ENGINEERING MATERIALS (2011)
CNT reinforced light metal composites produced by melt stirring and by high pressure die casting
Qianqian Li et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
A new technique for dispersion of carbon nanotube in a metal melt
Xiaoshu Zeng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Combination of hot extrusion and spark plasma sintering for producing carbon nanotube reinforced aluminum matrix composites
Hansang Kwon et al.
CARBON (2009)
Structural characterization of a mechanically milled carbon nanotube/aluminum mixture
Dominique Poirier et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Tensile properties of carbon nanotube reinforced aluminum nanocomposite fabricated by plasma spray forming
T. Laha et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Synthesis of multi-walled CNT reinforced aluminium alloy composite via friction stir processing
D. K. Lim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Aluminum composite reinforced with multiwalled carbon nanotubes from plasma spraying of spray dried powders
Srinivasa R. Bakshi et al.
SURFACE & COATINGS TECHNOLOGY (2009)
Synthesis of carbon nanotubes at low temperature by filament assisted atmospheric CVD and their field emission characteristics
Ahalapitiya H. Jayatissa et al.
VACUUM (2009)
Chemical oxidation of multiwalled carbon nanotubes
V. Datsyuk et al.
CARBON (2008)
The effect of various acids treatment on the purification and electrochemical hydrogen storage of multi-walled carbon nanotubes
A. Reyhani et al.
JOURNAL OF POWER SOURCES (2008)
Synthesis of carbon nanotubes and carbon onions by CVD using a Ni/Y catalyst supported on copper
Jianli Kang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Multiwalled carbon nanotubes catalytically grown from amorphous silica films deposited by combustion CVD
M. D. Lima et al.
PARTICULATE SCIENCE AND TECHNOLOGY (2007)
Fabrication and tribological properties of carbon nanotubes reinforced Al composites prepared by pressureless infiltration technique
Sheng-ming Zhou et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)
Study on purification and tip-opening of CNTs fabricated by CVD
Naiqin Zhao et al.
MATERIALS RESEARCH BULLETIN (2006)
High efficiency microwave digestion purification of multi-walled carbon nanotubes synthesized by thermal chemical vapor deposition
CM Chen et al.
THIN SOLID FILMS (2006)
CVD synthesis of high-purity multiwalled carbon nanotubes using CaCO3 catalyst support for large-scale production
E Couteau et al.
CHEMICAL PHYSICS LETTERS (2003)
Synthesis of carbon nanotubes on metallic substrates by a sequential combination of PECVD and thermal CVD
D Park et al.
CARBON (2003)
Catalyst traces and other impurities in chemically purified carbon nanotubes grown by CVD
LP Biró et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2002)
Synthesis of carbon nanotubes by laser ablation of graphites at room temperature
TF Kuo et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS (2001)
Growth of carbon nanotubes by chemical vapor deposition
M Jung et al.
DIAMOND AND RELATED MATERIALS (2001)
Large scale synthesis of single-wall carbon nanotubes by arc-discharge method
ZJ Shi et al.
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS (2000)