相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Application of Macro-Instrumented Indentation Test for Superficial Residual Stress and Mechanical Properties Measurement for HY Steel Welded T-Joints
Junsang Lee et al.
MATERIALS (2021)
Characteristics of premature creep failure in over-tempered base metal of grade 91 steel weldment
Yiyu Wang et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2021)
Influence of the groove shape on welding residual stresses in P92/SUS304 dissimilar metal butt-welded joints
Suo Li et al.
JOURNAL OF MANUFACTURING PROCESSES (2021)
An experimental and numerical analysis of residual stresses in a TIG weldment of a single crystal nickel-base superalloy
Jingwei Chen et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
A critical review on dissimilar welds joint between martensitic and austenitic steel for power plant application
Gaurav Dak et al.
JOURNAL OF MANUFACTURING PROCESSES (2020)
Failure analysis of a reheater tube dissimilar metal weld failure in a 500 MW power plant
Anand Varma et al.
ENGINEERING FAILURE ANALYSIS (2020)
Multi-scale mechanisms of twinning-detwinning in magnesium alloy AZ31B simulated by crystal plasticity modeling and validated via in situ synchrotron XRD and in situ SEM-EBSD
Hongjia Zhang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Validated prediction of weld residual stresses in austenitic steel pipe girth welds before and after thermal ageing, part 2: Modelling and validation
Qingrong Xiong et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2019)
An indentation method for evaluation of residual stress: ESTIMATION of stress-free indentation curve using stress-independent indentation parameters
Jong-hyoung Kim et al.
JOURNAL OF MATERIALS RESEARCH (2019)
An energy-based nanoindentation method to assess localized residual stresses and mechanical properties on shot-peened materials
Siavash Ghanbari et al.
JOURNAL OF MATERIALS RESEARCH (2019)
A critical assessment of the effect of indentation spacing on the measurement of hardness and modulus using instrumented indentation testing
P. Sudharshan Phani et al.
MATERIALS & DESIGN (2019)
Microstructural characterization and mechanical response of Inconel 600 welded joint
Lourdes Y. Herrera-Chavez et al.
MATERIALS CHARACTERIZATION (2019)
Finite element analysis of residual stress in 2.25Cr-1Mo steel pipe during welding and heat treatment process
Sendong Ren et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Determination of residual stress on TIG-treated surface via nanoindentation technique in Co-Cr-Mo-C alloy
M. Sahami-Nejad et al.
SURFACE & COATINGS TECHNOLOGY (2019)
Separating macro- (Type I) and micro- (Type II plus III) residual stresses by ring-core FIB-DIC milling and eigenstrain modelling of a plastically bent titanium alloy bar
Joris Everaerts et al.
ACTA MATERIALIA (2018)
HAZ Liquation Cracking Mechanism of IN-738LC Superalloy Prepared by Laser Solid Forming
Jianjun Xu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Assessing residual stresses in friction stir welding: neutron diffraction and nanoindentation methods
Meysam Haghshenas et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
An analysis of macro- and micro-scale residual stresses of Type I, II and III using FIB-DIC micro-ring-core milling and crystal plasticity FE modelling
E. Salvati et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Residual stress measurement round robin on an electron beam welded joint between austenitic stainless steel 316L(N) and ferritic steel P91
Y. Javadi et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2017)
Assessment of the Local Residual Stresses of 7050-T7452 Aluminum Alloy in Microzones by the Instrumented Indentation with the Berkovich Indenter
M. He et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2017)
Relationship between indentation plastic zone size and residual stresses in plastically deformed Fe
Yaoyao Ding et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Residual stress distribution in different depths of TiNi/Ti2Ni-based laser clad coating prepared at different environmental temperatures
Yang-feng Tao et al.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2017)
Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade
E. Salvati et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
The effect of residual stress on the electrochemical corrosion behavior of Fe-based amorphous coatings in chloride-containing solutions
Y. Wang et al.
SURFACE & COATINGS TECHNOLOGY (2016)
A state-of-the-art review of micron-scale spatially resolved residual stress analysis by FIB-DIC ring-core milling and other techniques
Alexander J. G. Lunt et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2015)
A review of micro-scale focused ion beam milling and digital image correlation analysis for residual stress evaluation and error estimation
Alexander J. G. Lunt et al.
SURFACE & COATINGS TECHNOLOGY (2015)
A further study on representative models for calculating the residual stress based on the instrumented indentation technique
Lei Xiao et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Analysis of residual stress relief mechanisms in post-weld heat treatment
Pingsha Dong et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2014)
Residual stress measurements in a ferritic steel/In625 superalloy dissimilar metal weldment using neutron diffraction and deep-hole drilling
A. Skouras et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2013)
Finite element simulation of residual stresses induced by the dissimilar welding of a P92 steel pipe with weld metal IN625
A. H. Yaghi et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2013)
Numerical analysis of different methods to calculate residual stresses in thin films based on instrumented indentation data
Carlos Eduardo Keutenedjian Mady et al.
JOURNAL OF MATERIALS RESEARCH (2012)
Residual stress distributions in a P91 steel-pipe girth weld before and after post weld heat treatment
S. Paddea et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Residual stress and deformation mechanism of friction stir welded aluminum alloys by nanoindentation
C. A. Charitidis et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Micrometre scale residual stress measurement in fusion boundary of dissimilar steel welded joints using nanoindenter system
Y. M. Huang et al.
MATERIALS SCIENCE AND TECHNOLOGY (2011)
Microstructure and residual stress of laser rapid formed Inconel 718 nickel-base superalloy
Fencheng Liu et al.
OPTICS AND LASER TECHNOLOGY (2011)
Conventional Vickers and true instrumented indentation hardness determined by instrumented indentation tests
Seung-Kyun Kang et al.
JOURNAL OF MATERIALS RESEARCH (2010)
Spatial variation of residual stresses in a welded pipe for high temperature applications
G. Hilson et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2009)
On the mechanics of residual stresses in girth welds
P. Dong
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME (2007)
Type IV cracking in ferritic power plant steels
J. A. Francis et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Prediction of welding residual stress in multi-pass butt-welded modified 9Cr-1Mo steel pipe considering phase transformation effects
Deng Dean et al.
COMPUTATIONAL MATERIALS SCIENCE (2006)
Evaluation of residual stresses in dissimilar weld joints
A Joseph et al.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2005)
Estimation of biaxial surface stress by instrumented indentation with sharp indenters
YH Lee et al.
ACTA MATERIALIA (2004)
Assessing welding residual stress in A335 P12 steel welds before and after stress-relaxation annealing through instrumented indentation technique
JI Jang et al.
SCRIPTA MATERIALIA (2003)
On the determination of residual stress and strain fields by sharp indentation testing. Part I: Theoretical and numerical analysis
S Carlsson et al.
ACTA MATERIALIA (2001)
Welding residual stresses and effects on fracture in pressure vessel and piping components: A millennium review and beyond
P Dong et al.
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME (2000)