Performance based systematic design methodology for development and flight testing of fuel engine powered quadrotor Unmanned Aerial System for industrial applications

This paper presents a systematic study of the design optimization, development, vibration analysis and flight testing of a single power plant variable pitch quadrotor Unmanned Aerial System (UAS) for industrial applications. The use of variable pitch rotors enables the use of a two-stroke internal combustion engine for powering the four rotors through a mechanical transmission. The proposed methodology is described by carrying out the design of a quadrotor UAS with 2-3 kg payload capacity and have endurance in excess of one hour. The study is conducted in a systematic manner. First, the design of rotors is optimized for minimum power consumption during hover as well as forward flight condition using physics based simulation developed and validated for this purpose. From the rotor optimization, an untwisted rotor blade with taper ratio of 0.6 and aspect ratio of 10 appeared to be an optimal choice for the current design. Next, the powerplant selection is carried out based on the optimized rotor designed earlier. Next, two different approaches for mechanical power transmission design is considered: torque tube-bevel gear and belt-pulley system based designs. The transmission system designed using belt and pulley was nearly 14% lighter and showed greater tolerance to manufacturing imperfections. Next, two prototypes are designed and its static and dynamic analysis is carried out to ensure its airworthiness. A Proportional Integral Derivative (PID) based attitude controller is developed using quarternions for attitude stabilization and trajectory tracking to test the flight in simulation and then subsequently on the actual vehicle by implementing it on PixHawk autopilot board. Finally, system integration is carried out to build two prototypes of engine powered quadrotor UAS. Then, vibration data is recorded using the sensors onboard to conduct the vibration analysis and design an efficient vibration isolator. Performance analysis is also, carried out to estimate the speed for best endurance (11 m/s) and best range (27 m/s) for the variable pitch quadrotor designed. The estimated best endurance achieved is 2.2 h and estimated best range is more than 150 km. This design revisits and solves the challenge of developing an agile helicopter without cyclic pitch control which was first explored nearly a century ago.

Automated summary

This paper presents a systematic study of the design optimization, development, vibration analysis, and flight testing of a single power plant variable pitch quadrotor unmanned aerial system (UAS) for industrial applications. The study involves the optimization of rotor design, powerplant selection, mechanical power transmission design, static and dynamic analysis of prototypes, development of an attitude controller, system integration, vibration analysis, and performance analysis. The design achieves a payload capacity of 2-3 kg and endurance exceeding one hour. The estimated best endurance achieved is 2.2 h and estimated best range is more than 150 km.