相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Vision-based modal analysis of cutting tools
Pulkit Gupta et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2021)
Full-field FRF estimation from noisy high-speed-camera data using a dynamic substructuring approach
Tomaz Bregar et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2021)
Effect of quasi-static motion on the dynamics and stability of robotic milling
Lutfi Taner Tunc et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)
Can mode coupling chatter happen in milling?
Huseyin Celikag et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2021)
Vibration analysis and cutting simulation of structural nonlinearity for machine tool
Naruhiro Irino et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2021)
Effects of Varying Dynamics of Flexible Workpieces in Milling Operations
Adam K. Kiss et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2020)
Time domain coupled simulation of machine tool dynamics and cutting forces considering the influences of nonlinear friction characteristics and process damping
Ryuta Sato et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2020)
Modal analysis of machine tools using visual vibrometry and output-only methods
Mohit Law et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)
Feed drive control tuning considering machine dynamics and chatter stability
X. Beudaert et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)
Determination of the dynamic behaviour of micro-milling tools at higher spindle speeds using ball-shooting tests for the application in process simulations
Petra Wiederkehr et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2020)
Ensemble transfer learning for refining stability predictions in milling using experimental stability states
M. Postel et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)
Neural network supported inverse parameter identification for stability predictions in milling
M. Postel et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2020)
Prediction of Tool Point Frequency Response Functions within Machine Tool Work Volume Considering the Position and Feed Direction Dependence
Congying Deng et al.
SYMMETRY-BASEL (2020)
Recent progress of chatter prediction, detection and suppression in milling
Lida Zhu et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)
Process Parameters Optimization of Thin-Wall Machining for Wire Arc Additive Manufactured Parts
Niccolo Grossi et al.
APPLIED SCIENCES-BASEL (2020)
Fast swept sine cutting test for CNC lathes
Keigo Takasugi et al.
JOURNAL OF ADVANCED MECHANICAL DESIGN SYSTEMS AND MANUFACTURING (2020)
Identification Method of Modal Parameters of Machine Tools Under Periodic Cutting Excitation
Ling Yin et al.
IEEE ACCESS (2020)
Evaluation of Dynamic Characteristics of a Hybrid Guideway System
Isao Oshita et al.
INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY (2020)
Predictive simulation of damping effects in machine tools
M. F. Zaeh et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
Portable damping system for chatter suppression on flexible workpieces
X. Beudaert et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
Analysis of the beating frequencies in dressing and its effect in surface waviness
R. Merino et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2019)
In-process identification of modal parameters using dimensionless relationships in milling chatter
Mahdi Eynian
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2019)
Development of an automated modal extraction methodology through OMA by random cutting excitation of a legacy milling machine
D. Poddar et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
An efficient decomposition-condensation method for chatter prediction in milling large-scale thin-walled structures
Yun Yang et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)
Machined Surface Quality Monitoring Using a Wireless Sensory Tool Holder in the Machining Process
Zhiyuan Lu et al.
SENSORS (2019)
On-machine measurement method for dynamic stiffness of thin-walled workpieces
Daisuke Kono et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2019)
ESTIMATION OF ENGAGEMENT CONDITIONS USING AN ANN PATTERN RECOGNITION SYSTEM ON THE BASE OF A SENSORY TOOL HOLDER
T. Bergs et al.
MM SCIENCE JOURNAL (2019)
Time-Domain Modeling of Varying Dynamic Characteristics in Thin-Wall Machining Using Perturbation and Reduced-Order Substructuring Methods
Oguzhan Tuysuz et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
High speed tooltip FRF predictions of arbitrary tool-holder combinations based on operational spindle identification
M. Postel et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
A practical study of joints in three-dimensional Inverse Receptance Coupling Substructure Analysis method in a horizontal milling machine
J. A. Ealo et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2018)
Modeling and characterization of an electromagnetic system for the estimation of Frequency Response Function of spindle
David Tlalolini et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2018)
A Consistent Procedure Using Response Surface Methodology to Identify Stiffness Properties of Connections in Machine Tools
Jesus-Maria Hernandez-Vazquez et al.
MATERIALS (2018)
Development of an Active Damping System for Structural Chatter Suppression in Machining Centers
Iker Mancisidor et al.
INTERNATIONAL JOURNAL OF AUTOMATION TECHNOLOGY (2018)
Frequency Domain Updating of Thin-Walled Workpiece Dynamics Using Reduced Order Substructuring Method in Machining
Oguzhan Tuysuz et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2017)
Improved experimental-analytical approach to compute speed-varying tool-tip FRF
N. Grossi et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2017)
Automatic tuning of active vibration control systems using inertial actuators
M. F. Zaeh et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2017)
Modeling of the dynamic behavior of machine tools: influences of damping, friction, control and motion
C. Rebelein et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2017)
Chatter suppression techniques in metal cutting
J. Munoa et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2016)
Improved predictions of the stability lobes for milling cutting operations of thin-wall components by considering ultra-miniature accelerometer mass effects
D. Olvera et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)
The Challenge of Dynamic Similarity Assessment
Adam C. Moya et al.
MODEL VALIDATION AND UNCERTAINTY QUANTIFICATION, VOL 3 (2016)
Friction in feed drives of machine tools: investigation, modeling and validation
C. Rebelein et al.
PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT (2016)
FRF Estimation through Sweep Milling Force Excitation (SMFE)
A. Iglesias et al.
7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING (2016)
Evaluation of dynamic stiffness of machine tool spindle by non-contact excitation tests
Atsushi Matsubara et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2015)
Spindle speed ramp-up test: A novel experimental approach for chatter stability detection
N. Grossi et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
In-process tool point FRF identification under operational conditions using inverse stability solution
O. Ozsahin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2015)
Estimation of FRFs of machine tools in output-only modal analysis
Hui Cai et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Coupled model for simulating active inertial actuators in milling processes
I. Mancisidor et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Stability analysis in milling of flexible parts based on operational modal analysis
Bartosz Powalka et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2015)
Axis position dependent dynamics of multi-axis milling machines
C. Brecher et al.
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO) (2015)
A Method for Identification of Machine-tool Dynamics under Machining
Hui Cai et al.
15TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (15TH CMMO) (2015)
Analytical modeling of asymmetric multi-segment rotor - bearing systems with Timoshenko beam model including gyroscopic moments
O. Ozsahin et al.
COMPUTERS & STRUCTURES (2014)
Optimisation of face milling operations with structural chatter using a stability model based process planning methodology
A. Iglesias et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2014)
Dynamics of ultra-high-speed (UHS) spindles used for micromachining
Bekir Bediz et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
An approach for measuring the FRF of machine tool structure without knowing any input force
Xinyong Mao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2014)
An impact excitation system for repeatable, high-bandwidth modal testing of miniature structures
Bekir Bediz et al.
JOURNAL OF SOUND AND VIBRATION (2014)
Experimental modal analysis performed by high-speed digital image correlation system
F. Trebuna et al.
MEASUREMENT (2014)
Position-dependent dynamics and stability of serial-parallel kinematic machines
M. Law et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2013)
A new approach to identifying the dynamic behavior of CNC machine tools with respect to different worktable feed speeds
Bin Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Estimation of CNC machine-tool dynamic parameters based on random cutting excitation through operational modal analysis
Bin Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2013)
Position-Dependent Multibody Dynamic Modeling of Machine Tools Based on Improved Reduced Order Models
Mohit Law et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Identification and Modeling of Process Damping in Milling
L. T. Tunc et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2013)
Prediction of workpiece dynamics and its effects on chatter stability in milling
Erhan Budak et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Investigation of spindle bearing preload on dynamics and stability limit in milling
E. Ozturk et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2012)
Effect of cutting conditions and tool geometry on process damping in machining
L. T. Tunc et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Chatter stability of milling with speed-varying dynamics of spindles
Hongrui Cao et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2012)
Method for Vibration Response Simulation and Sensor Placement Optimization of a Machine Tool Spindle System with a Bearing Defect
Hongrui Cao et al.
SENSORS (2012)
Machine tool feed drives
Y. Altintas et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2011)
A comparative study on the dynamics of high speed spindles with respect to different preload mechanisms
Hongrui Cao et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Modeling of the dynamic behavior of systems with rolling elements
K. De Moerlooze et al.
INTERNATIONAL JOURNAL OF NON-LINEAR MECHANICS (2011)
Identification and modeling of process damping in turning and milling using a new approach
E. Budak et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
A general approach to simulating workpiece vibrations during five-axis milling of turbine blades
D. Biermann et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2010)
A new damping modelling approach and its application in thin wall machining
O. B. Adetoro et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2010)
Analysis and compensation of mass loading effect of accelerometers on tool point FRF measurements for chatter stability predictions
O. Ozsahin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
Matrix perturbation method for predicting dynamic modal shapes of the workpiece in high-speed machining
X-M Zhang et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2010)
Estimation of machine-tool dynamic parameters during machining operation through operational modal analysis
I. Zaghbani et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2009)
Chatter Stability of General Turning Operations With Process Damping
M. Eynian et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2009)
An experimental investigation of chatter effects on tool life
M. Kayhan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2009)
Identification of dynamic cutting force coefficients and chatter stability with process damping
Y. Altintas et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2008)
A new experimental methodology for identification of stability lobes diagram in milling operations
Guillem Quintana et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2008)
Bivariate uncertainty analysis for impact testing
H. S. Kim et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2007)
Modeling and identification of tool holder-spindle interface dynamics
Mehdi Namazi et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Milling machine spindle analysis using FEM and non-contact spindle excitation and response measurement
Matti Rantatalo et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Model-based chatter stability prediction for high-speed spindles
V. Gagnol et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Effect analysis of bearing and interface dynamics on tool point FRF for chatter stability in machine tools by using a new analytical model for spindle-tool assemblies
A. Ertuerk et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2007)
Correction of dynamic effects on force measurements made with piezoelectric dynamometers
Luis Ricardo Castro et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Centrifugal force induced dynamics of a motorized high-speed spindle
Jenq-Shyong Chen et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2006)
Prediction of chatter in high speed milling including gyroscopic effects
MR Movahhedy et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Design, development and testing of a turning dynamometer for cutting force measurement
Sueleyman Yaldiz et al.
MATERIALS & DESIGN (2006)
Damage detection of a rotating cracked shaft using an active magnetic bearing as a force actuator - Analysis and experimental verification
DD Quinn et al.
IEEE-ASME TRANSACTIONS ON MECHATRONICS (2005)
High frequency bandwidth cutting force measurement in milling using capacitance displacement sensors
A Albrecht et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Piezoelectric sensors and actuators for milling tool stability lobes
ND Sims et al.
JOURNAL OF SOUND AND VIBRATION (2005)
Uncertainties and dynamic problems of bolted joints and other fasteners
RA Ibrahim et al.
JOURNAL OF SOUND AND VIBRATION (2005)
Analysis of bearing configuration effects on high speed spindles using an integrated dynamic thermo-mechanical spindle model
HQ Li et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2004)
The PolyMAX frequency-domain method: a new standard for modal parameter estimation?
B Peeters et al.
SHOCK AND VIBRATION (2004)
Creating stability lobe diagrams during
E Abele et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Prediction of regenerative chatter by modelling and analysis of high-speed milling
RPH Faassen et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
An integrated thermo-mechanical-dynamic model to characterize motorized machine tool spindles during very high speed rotation
CW Lin et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Study of the gyroscopic effect of the spindle on the stability characteristics of the milling system
GL Xiong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Predicting dynamic behaviours of a whole machine tool structure based on computer-aided engineering
GP Zhang et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2003)
Stochastic system identification for operational modal analysis: A review
B Peeters et al.
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME (2001)
Non-linear dynamics tools for the motion analysis and condition monitoring of robot joints
I Trendafilova et al.
MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2001)
Chatter instability in milling systems with flexible rotating spindles - A new theoretical approach
JF Tian et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2001)
Performances of HSK tool interfaces under high rotational speed
T Aoyama et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2001)