4.8 Article

Advanced polyanionic electrode materials for potassium-ion batteries: Progresses, challenges and application prospects

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Multidisciplinary

An Advanced High-Entropy Fluorophosphate Cathode for Sodium-Ion Batteries with Increased Working Voltage and Energy Density

Zhen-Yi Gu et al.

Summary: This study investigates the issue of voltage plateau regulation for cathode materials with fixed active center in sodium-ion batteries. A high-entropy substitution strategy is utilized to alter the crystal structure of the cathode materials, resulting in enhanced electronic conductivity and reduced diffusion barrier for Na+. The carbon-free high-entropy Na3V1.9(Ca,Mg,Al,Cr,Mn)(0.1)(PO4)(2)F-3 cathode exhibits higher mean voltage and advantageous energy density. The introduction of high entropy enables higher working voltage of the cathode, and coupling with a hard carbon anode achieves high specific energy density.

ADVANCED MATERIALS (2022)

Article Chemistry, Multidisciplinary

Extraordinary role of Zn in enhancing thermoelectric performance of Ga-doped n-type PbTe

Zhong-Zhen Luo et al.

Summary: Zn plays a crucial role in enhancing the thermoelectric performance of Ga-doped PbTe by improving electronic transport properties and reducing lattice thermal conductivity, resulting in a significant increase in the figure of merit.

ENERGY & ENVIRONMENTAL SCIENCE (2022)

Article Electrochemistry

Advanced cathode for dual-ion batteries: Waste-to-wealth reuse of spent graphite from lithium-ion batteries

Jia-Lin Yang et al.

Summary: The research aims to convert spent anode graphite into cathode material for dual-ion batteries through a two-step treatment, achieving comparable performance to commercial graphite with high reversible capacity and improved cycling performance, demonstrating significant environmental and economic benefits.

ESCIENCE (2022)

Article Metallurgy & Metallurgical Engineering

Nano-SnO2 Decorated Carbon Cloth as Flexible, Self-supporting and Additive-Free Anode for Sodium/Lithium-Ion Batteries

Xu Yang et al.

Summary: Nano-sized SnO2 decorated on carbon cloth (SnO2/CC) prepared through a simple solid method shows promising electrochemical performance as a flexible and self-supporting anode material for SIBs/LIBs. The as-prepared SnO2/CC provides sufficient free space to relieve volume expansion and reduce electrode pulverization during cycling, delivering reversible capacity and maintaining high capacity after cycles.

ACTA METALLURGICA SINICA-ENGLISH LETTERS (2021)

Article Chemistry, Multidisciplinary

Hybrid and Aqueous Li+-Meta Batteries

Jing Zhao et al.

Summary: The novel hybrid-ion battery proposed in this study utilizes Ni metal as the anode and benefits from the electrostatic shielding effect of Li+ to achieve smooth and dendrite-free surface deposition, leading to an ultralong lifespan over 4000 hours and high coulombic efficiency over 99.5%.

CCS CHEMISTRY (2021)

Review Chemistry, Multidisciplinary

Challenges and Strategies toward Cathode Materials for Rechargeable Potassium-Ion Batteries

Shude Liu et al.

Summary: With increasing demand for grid-scale energy storage, potassium-ion batteries (PIBs) have emerged as promising complements or alternatives to commercial lithium-ion batteries. However, the low energy density and unstable cycle life of cathode materials are current challenges that need to be addressed in the development of next-generation PIBs.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

A Low-Strain Phosphate Cathode for High-Rate and Ultralong Cycle-Life Potassium-Ion Batteries

Jiaying Liao et al.

Summary: A controllable synthesis method for a novel low-strain phosphate material K-3(VO)(HV2O3)(PO4)(2)(HPO4) (referred to as KVP) nanoruler was introduced as an efficient cathode for PIBs, demonstrating excellent cycling performance, rate capability, and capacity retention. The outstanding potassium storage capability of KVP nanoruler cathode is attributed to its low-strain K+ uptake/removal mechanism, inherent semiconductor characteristic, and small K+ migration energy barrier.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

Article Engineering, Environmental

KTiOPO4: A long-life, high-rate and low-temperature-workable host for Na/K-ion batteries

Yuruo Qi et al.

Summary: The well-crystallized KTiOPO4 nanoparticles reported in this study demonstrate impressive electrochemical performance in Na/K-ion batteries, with high reversible capacities, superior rate capabilities, and outstanding cycling stability. The outstanding performance is attributed to the stable framework and highly reversible reactions during the Na+/K+ (de)insertion process, making the KTiOPO4 nanoparticles a promising candidate as Na/K-ion reservoirs.

CHEMICAL ENGINEERING JOURNAL (2021)

Article Chemistry, Physical

Spray drying derived wrinkled pea-shaped carbon-matrixed KVP2O7 as a cathode material for potassium-ion batteries

Xiao-Dong He et al.

Summary: The designed and synthesized carbon-matrixed potassium vanadium pyrophosphate powder KVP2O7@C shows promising performance as a cathode material for potassium-ion batteries, with a high reversible capacity, energy density, and potassium storage mechanism revealed. A full cell constructed by coupling KVP2O7@C cathode with a hard carbon anode demonstrates high operating voltage, energy density, and superior cycling stability.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

Simple Synthesis of K0.5VOPO4•1.5H2O/Graphene Oxide Composite as a Cathode Material for Potassium-Ion Batteries

Huanhuan Li et al.

Summary: A K0.5VOPO4·1.5H2O/graphene oxide composite as a polyanionic cathode material for potassium-ion batteries was synthesized, showing high capacity and energy density, as well as excellent cycle and rate performance. The simple synthesis process and outstanding performance indicate its commercial potential in the future.

ACS APPLIED ENERGY MATERIALS (2021)

Article Chemistry, Physical

A New Candidate in Polyanionic Compounds for a Potassium-Ion Battery Cathode: KTiOPO4

Jiajia Huang et al.

Summary: The research shows that KTP as a cathode material for PIBs exhibits excellent stability and ion diffusion properties, providing high voltage output and good charge-discharge rate.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2021)

Article Chemistry, Physical

Revealing the Thermal Safety of Prussian Blue Cathode for Safer Nonaqueous Batteries

Zheng Li et al.

Summary: This study investigates the thermal runaway mechanisms of Prussian blue analogs in nonaqueous sodium- and potassium-ion batteries, revealing a new runaway mechanism that does not involve oxygen evolution, and identifying safety issues related to cyanide release and exothermic reactions with the electrolyte. Calorimetric studies at the full-cell level show mitigated heat generation but lower initiation temperature of runaway compared to conventional systems, suggesting that PBA materials cannot be considered as safe cathodes and highlighting the importance of crystal defects and trapped water content in thermal safety.

ADVANCED ENERGY MATERIALS (2021)

Article Chemistry, Physical

An Alternative Charge-Storage Mechanism for High-Performance Sodium-Ion and Potassium-Ion Anodes

Yanjiao Ma et al.

Summary: The study found that Fe-doped CeO2 can serve as an active material for the negative electrode in alternative battery technologies, offering high specific capacity and excellent rate capability. The capacity increase was directly related to the off-centered Fe position and a selective reduction process, allowing for more reversible de-/insertion of sodium and potassium cations.

ACS ENERGY LETTERS (2021)

Article Chemistry, Physical

Fast sodium intercalation in Na3.41£0.59FeV(PO4)3: A novel sodium-deficient NASICON cathode for sodium-ion batteries

Mohammed Hadouchi et al.

Summary: The new material exhibits high initial discharge capacity and outstanding rate capability and cycle life, attributed to its small volume change and single-phase mechanism. Experimental data and computational methods reveal the mechanism of sodium extraction and diffusion kinetics. These findings contribute to enhancing the electrochemical performance of sodium-ion batteries.

ENERGY STORAGE MATERIALS (2021)

Article Chemistry, Multidisciplinary

K-Ion Battery Cathode Design Utilizing Trigonal Prismatic Ligand Field

Nanzhong Wu et al.

Summary: The physical and chemical properties of materials are largely determined by the bonding and electronic structures of their fundamental units. A new cathode design for K-ion batteries, K2Fe(C2O4)(2), with a trigonal prism structure shows excellent electrochemical activity and cycling stability. Detailed synchrotron X-ray absorption spectroscopy measurements reveal the evolution of localized fine structures, demonstrating the electrochemical activity, reversibility, and stability of the trigonal prism motif.

ADVANCED MATERIALS (2021)

Article Chemistry, Multidisciplinary

The Efficient K Ion Storage of M2P2O7/C (M=Fe, Co, Ni) Anode Derived from Organic-Inorganic Phosphate Precursors

Yibo Zhang et al.

Summary: Novel structured M2P2O7/C (M=Fe, Co, Ni) nanoflake composites were prepared through a simple method, offering enough active sites to enhance the electrochemical performance of potassium ion batteries.

CHEMISTRY-A EUROPEAN JOURNAL (2021)

Article Energy & Fuels

Fundamental theoretical design of Na-ion and K-ion based double antiperovskite X6SOA2 (X = Na, K; A = Cl, Br and I) halides: Potential candidate for energy storage and harvester

Upasana Rani et al.

Summary: The main focus is on the production and storage of energy, looking for non-toxic, eco-friendly, and inexpensive energy storage devices as alternatives to lithium-ion batteries.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2021)

Article Chemistry, Physical

Na3V2O2x(PO4)2F3-2x as a stable positive electrode for potassium-ion batteries

P. Ramesh Kumar et al.

Summary: The study demonstrates reversible potassium ion insertion into a solid solution composite, with the composite showing high electrode potential, good cycle stability, and high-rate capability performances.

JOURNAL OF POWER SOURCES (2021)

Article Multidisciplinary Sciences

Polypeptide organic radical batteries

Tan P. Nguyen et al.

Summary: The rapid development of lithium-ion batteries has brought substantial benefits to society, but also highlighted ethical and environmental challenges. Organic redox-active materials may offer a potential alternative for sustainable batteries in the future.

NATURE (2021)

Article Multidisciplinary Sciences

Tuning local chemistry of P2 layered-oxide cathode for high energy and long cycles of sodium-ion battery

Chenchen Wang et al.

Summary: In this study, a layered P2-Na0.612K0.056MnO2 with large-sized K+ riveted in the Na-layers enables 0.9 Na+ (de)insertion with a reversible phase transition of P2-P'2. This cathode material demonstrates the highest specific capacity and energy density based on the redox of Mn3+/Mn4+, with high capacity retention after 100 cycles. This research provides insights into tunable chemical environments of transition-metal oxides for advanced cathode materials and promotes the development of sodium-ion batteries. High capacity and structural stable cathode materials remain challenges for sodium-ion batteries.

NATURE COMMUNICATIONS (2021)

Article Chemistry, Physical

NaTi2(PO4)3 hollow nanoparticles encapsulated in carbon nanofibers as novel anodes for flexible aqueous rechargeable sodium-ion batteries

Bing He et al.

Summary: The synthesized hollow-structure NTP encapsulated in cross-linked porous N-doped carbon nanofiber (HNTP@PNC) directly acts as a binder-free anode for flexible ARSIBs, showing high rate capacity and cycling stability. The NTP with NC coating enhances electronic conductivity and Na+ diffusion kinetics, leading to the success in constructing a high-performance quasi-solid-state ARSIB with a high energy density and volumetric capacity.

NANO ENERGY (2021)

Article Nanoscience & Nanotechnology

Selective Interface Synthesis of Cobalt Metaphosphate Nanosheet Arrays Motivated by Functionalized Carbon Cloths for Fast and Durable Na/K-Ion Storage

Hanna He et al.

Summary: A novel energy storage material based on cobalt metaphosphate nanosheet arrays self-supported on carbon cloths was successfully fabricated, demonstrating high reversibility and excellent cyclability in sodium ion storage, as well as superior performance in potassium ion storage compared to most reported anodes. The development of this high-performance nanomaterial has the potential to advance the practical applications of sodium/potassium-ion batteries.

ACS APPLIED MATERIALS & INTERFACES (2021)

Review Chemistry, Multidisciplinary

Kinetic 2D Crystals via Topochemical Approach

Jihong Bae et al.

Summary: The designing of novel materials is an intriguing and innovative path in materials science, with novel layered compounds having significant impact across various research fields. The synthesis of binary layered materials using topochemical methods is seen as a major scientific breakthrough.

ADVANCED MATERIALS (2021)

Review Chemistry, Multidisciplinary

High-Performance Cathode Materials for Potassium-Ion Batteries: Structural Design and Electrochemical Properties

Yan-Song Xu et al.

Summary: Potassium-ion batteries (PIBs) are gaining research attention as an alternative energy storage system to lithium-ion batteries (LIBs) due to their advantage in potassium reserves. Finding suitable electrode materials, especially cathode materials that can withstand the serious structural deformation during continuous potassium intercalation/deintercalation, is crucial for stable electrochemical performance. The relationship between material lattice frameworks and performance is discussed, along with potential strategies for future development of PIBs.

ADVANCED MATERIALS (2021)

Review Energy & Fuels

Phosphate Polyanion Materials as High-Voltage Lithium-Ion Battery Cathode: A Review

JinKiong Ling et al.

Summary: The review focuses on the development of phosphate polyanion cathode materials for high-voltage lithium-ion batteries, highlighting their high electrochemical potential, long cycle stability, low cost, and achieved specific capacity. Various techniques to improve the electrical and ionic conductivities of these cathodes are discussed, along with strategies for future high-voltage phosphate polyanion cathode materials.

ENERGY & FUELS (2021)

Article Chemistry, Multidisciplinary

A vanadium-based oxide-phosphate-pyrophosphate framework as a 4 V electrode material for K-ion batteries

Mirai Ohara et al.

Summary: A potassium vanadium oxide phosphate was synthesized as a positive electrode material for KIBs, showing high cycling stability and working voltage with reversible potassium extraction/insertion. The material underwent a two-phase reaction mechanism during the charge/discharge process, revealing minimal volume change and excellent cycling stability over 100 cycles. The robustness of the polyanionic framework was demonstrated through identical XRD patterns of the pristine and cycled electrodes.

CHEMICAL SCIENCE (2021)

Article Chemistry, Physical

Computational and experimental search for potential polyanionic K-ion cathode materials

Jingyang Wang et al.

Summary: In this study, ten potassium polyanionic compounds with theoretical capacity >100 mA h g(-1) were screened as potential cathode materials for K-ion batteries. Among the synthesized compounds, K2MnP2O7, K2Mn2P2O7F2, K2Fe2P2O7F2, and K6V2(PO4)(4) showed average voltage <4.5 V. The in situ investigation revealed that K3V2Cr(PO4)(4) exhibits the largest reversible capacity among the series of K3V3-xCrx(PO4)(4) compounds. The high redox potential in many of these compounds presents both opportunities and challenges for future research on K polyanion cathodes.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Review Electrochemistry

Recent Progress in Polyanionic Anode Materials for Li (Na)-Ion Batteries

Yao Liu et al.

Summary: While carbon, oxide, and silicon-based materials have limitations in current LIB applications, polyanionic compounds have gained attention for their ability to stabilize structures, adjust redox couples, and provide migration channels for guest ions, leading to electrode materials with long-term cycling, high energy density, and outstanding rate capability.

ELECTROCHEMICAL ENERGY REVIEWS (2021)

Article Chemistry, Physical

Low-cost and high-power K4[Mn2Fe](PO4)2(P2O7) as a novel cathode with outstanding cyclability for K-ion batteries

Jungmin Kang et al.

Summary: This study introduces a promising cathode material, K-4[Mn2Fe](PO4)(2)(P2O7), with a stable three-dimensional crystal structure and large K+ diffusion pathways for K-ion batteries. Through combined experimental techniques and first-principles calculation, the outstanding electrochemical properties and reaction mechanism of K-4[Mn2Fe](PO4)(2)(P2O7) in a K-ion battery system are demonstrated, showing good capacity retention and high coulombic efficiency. These findings highlight the importance of a stable three-dimensional crystal structure for high-performance K-ion batteries.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Materials Science, Multidisciplinary

High-ionicity fluorophosphate lattice via aliovalent substitution as advanced cathode materials in sodium-ion batteries

Zhen-Yi Gu et al.

Summary: By optimizing Na-storage performance of NVPF through lattice modulation, the Na+-substituted NVPF-Na-0.07 exhibits unprecedented electrochemical performance with high-rate capability, ultralong cycle life, and wide-temperature electrochemical performance.

INFOMAT (2021)

Review Electrochemistry

High-Mass-Loading Electrodes for Advanced Secondary Batteries and Supercapacitors

Feng Wu et al.

Summary: The increasing demand for high energy density advanced electrochemical energy storage systems (EESSs) for electric vehicles and portable electronics is driving the electrode revolution, with the development of high-mass-loading electrodes (HMLEs) as a promising approach. However, HMLEs face challenges such as poor charge kinetics, electrode structural stability, and complex production processes. This review provides a comprehensive summary of HMLEs, discussing strategies to improve their electrochemical performance and their applications in various EESSs.

ELECTROCHEMICAL ENERGY REVIEWS (2021)

Article Chemistry, Physical

An ultra-long life aqueous full K-ion battery

Yibo Li et al.

Summary: This study presents a rocking-chair type aqueous full K-ion system with high capacity retention, excellent rate performance, and high energy density, demonstrating fast reaction kinetics and high structural stability of the materials used. The system represents the future of advanced energy storage technologies, utilizing KTi2(PO4)(3)/C as the anode material, iron hexacyanoferrate as the cathode, and 21 m KCF3SO3 as the water-in-salt electrolyte.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Materials Science, Multidisciplinary

A novel low-cost and environment-friendly cathode with large channels and high structure stability for potassium-ion storage

Weike Wang et al.

Summary: This study presents a novel potassium-ion battery cathode material K4Fe3(C2O4)(3)(SO4)(2) with a unique crystal structure and excellent K-ion migration properties, showing low volume change and good stability. Further optimization is needed to improve its performance, but the research provides a stable structural model for K-ion cathodes with merits of low cost and environmental friendliness.

SCIENCE CHINA-MATERIALS (2021)

Article Chemistry, Multidisciplinary

Uncovering the Potential of M1-Site-Activated NASICON Cathodes for Zn-Ion Batteries

Pu Hu et al.

ADVANCED MATERIALS (2020)

Article Electrochemistry

Potassium-ion intercalation in anti-NASICON-type iron molybdate Fe-2(MoO4)(3)

Baskar Senthilkumar et al.

ELECTROCHEMISTRY COMMUNICATIONS (2020)

Article Chemistry, Physical

A long lifespan potassium-ion full battery based on KVPO4F cathode and VPO4 anode

Jiaying Liao et al.

JOURNAL OF POWER SOURCES (2020)

Article Multidisciplinary Sciences

A fluoroxalate cathode material for potassium-ion batteries with ultra-long cyclability

Bifa Ji et al.

NATURE COMMUNICATIONS (2020)

Review Chemistry, Multidisciplinary

The Chemistry and Promising Applications of Graphene and Porous Graphene Materials

Haibo Huang et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

Article Chemistry, Multidisciplinary

Oxalate-Based High-Capacity Conversion Anode for Potassium Storage

Chang-Heum Jo et al.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2020)

Article Chemistry, Multidisciplinary

KTi2(PO4)3 Electrode with a Long Cycling Stability for Potassium-Ion Batteries

Natalia Voronina et al.

Article Multidisciplinary Sciences

Titanium-based potassium-ion battery positive electrode with extraordinarily high redox potential

Stanislav S. Fedotov et al.

NATURE COMMUNICATIONS (2020)

Review Chemistry, Physical

Transition metal based battery-type electrodes in hybrid supercapacitors: A review

Huan Liu et al.

ENERGY STORAGE MATERIALS (2020)

Article Materials Science, Multidisciplinary

Bowl-shaped NiCo2O4 nanosheet clusters as electrode materials for high-performance asymmetric supercapacitors

Ruiyi Liu et al.

SCIENCE CHINA-MATERIALS (2020)

Review Chemistry, Physical

Energy Storage Chemistry in Aqueous Zinc Metal Batteries

Fang Wan et al.

ACS ENERGY LETTERS (2020)

Article Chemistry, Physical

Electrochemical insertion of potassium ions in Na4Fe3(PO4)2P2O7 mixed phosphate

Baskar Senthilkumar et al.

JOURNAL OF POWER SOURCES (2020)

Article Electrochemistry

Electrochemical Redox Processes Involved in Carbon-Coated KVPO4F for High Voltage K-Ion Batteries Revealed by XPS Analysis

Laure Caracciolo et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Chemistry, Multidisciplinary

Graphene encircled KFeSO4F cathode composite for high energy density potassium-ion batteries

Jiemin Dong et al.

CHEMICAL COMMUNICATIONS (2020)

Article Chemistry, Physical

An iron-based polyanionic cathode for potassium storage with high capacity and excellent cycling stability

Haiyan He et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

Review Chemistry, Multidisciplinary

Design of Hollow Nanostructures for Energy Storage, Conversion and Production

Jiangyan Wang et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Multidisciplinary

Investigation of Alkali-Ion (Li, Na, and K) Intercalation in KxVPO4F (x ∼ 0) Cathode

Haegyeom Kim et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

Article Chemistry, Multidisciplinary

Safe, Low-Cost, Fast-Kinetics and Low-Strain Inorganic-Open-Framework Anode for Potassium-Ion Batteries

Ruding Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

Article Chemistry, Multidisciplinary

Polyanionic Compounds for Potassium-Ion Batteries

Tomooki Hosaka et al.

CHEMICAL RECORD (2019)

Review Chemistry, Multidisciplinary

Exploring competitive features of stationary sodium ion batteries for electrochemical energy storage

Tiefeng Liu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2019)

Article Chemistry, Physical

K3V2(PO4)2F3 as a robust cathode for potassium-ion batteries

Xiuyi Lin et al.

ENERGY STORAGE MATERIALS (2019)

Article Chemistry, Multidisciplinary

KVPO4F as a novel insertion-type anode for potassium ion batteries

Hong Tan et al.

CHEMICAL COMMUNICATIONS (2019)

Review Chemistry, Multidisciplinary

Next-Generation Cathode Materials for Non-aqueous Potassium-Ion Batteries

Haegyeom Kim et al.

TRENDS IN CHEMISTRY (2019)

Article Chemistry, Multidisciplinary

In situ carbon coated flower-like VPO4 as an anode material for potassium-ion batteries

Jiaying Liao et al.

CHEMICAL COMMUNICATIONS (2019)

Article Chemistry, Multidisciplinary

A High-Energy-Density Potassium Battery with a Polymer-Gel Electrolyte and a Polyaniline Cathode

Hongcai Gao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2018)

Review Chemistry, Multidisciplinary

Review of Hybrid Ion Capacitors: From Aqueous to Lithium to Sodium

Jia Ding et al.

CHEMICAL REVIEWS (2018)

Article Chemistry, Physical

A New Strategy for High-Voltage Cathodes for K-Ion Batteries: Stoichiometric KVPO4F

Haegyeom Kim et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Physical

Reversible facile Rb+ and K+ ions de/insertion in a KTiOPO4-type RbVPO4F cathode material

Stanislav S. Fedotov et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

Article Chemistry, Physical

Mechanistic Insights of Zn2+ Storage in Sodium Vanadates

Xun Guo et al.

ADVANCED ENERGY MATERIALS (2018)

Article Chemistry, Multidisciplinary

An Ultrafast and Highly Stable Potassium-Organic Battery

Ling Fan et al.

ADVANCED MATERIALS (2018)

Article Electrochemistry

Transport and Kinetic Aspects of Alkali Metal Ions Intercalation into AVPO4F Framework

Victoria A. Nikitina et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2017)

Review Chemistry, Multidisciplinary

Challenges and Perspectives for NASICON-Type Electrode Materials for Advanced Sodium-Ion Batteries

Shuangqiang Chen et al.

ADVANCED MATERIALS (2017)

Article Chemistry, Multidisciplinary

KVPO4F and KVOPO4 toward 4 volt-class potassium-ion batteries

Kuniko Chihara et al.

CHEMICAL COMMUNICATIONS (2017)

Review Chemistry, Multidisciplinary

Polymer-Based Organic Batteries

Simon Muench et al.

CHEMICAL REVIEWS (2016)

Article Chemistry, Multidisciplinary

Extraordinary Supercapacitor Performance of a Multicomponent and Mixed-Valence Oxyhydroxide

Jianli Kang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

Article Chemistry, Physical

Hierarchical carbon nanocages as high-rate anodes for Li- and Na-ion batteries

Zhiyang Lyu et al.

NANO RESEARCH (2015)

Review Chemistry, Multidisciplinary

Research Development on Sodium-Ion Batteries

Naoaki Yabuuchi et al.

CHEMICAL REVIEWS (2014)

Article Materials Science, Multidisciplinary

Amorphous iron phosphate: potential host for various charge carrier ions

Vinod Mathew et al.

NPG ASIA MATERIALS (2014)

Article Multidisciplinary Sciences

Biologically derived melanin electrodes in aqueous sodium-ion energy storage devices

Young Jo Kim et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2013)

Article Chemistry, Physical

Mechanistic study of the electrochemical extraction of K+ from KFeSO4F

Chen Ling et al.

JOURNAL OF MATERIALS CHEMISTRY A (2013)