相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Anomalous precipitate-size-dependent ductility in multicomponent high-entropy alloys with dense nanoscale precipitates
Y. L. Zhao et al.
ACTA MATERIALIA (2022)
High density of strong yet deformable intermetallic nanorods leads to an excellent room temperature strength-ductility combination in a high entropy alloy
Bharat Gwalani et al.
ACTA MATERIALIA (2021)
Elemental partitioning as a route to design precipitation-hardened high entropy alloys
Feng He et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Enhanced mechanical performance of grain boundary precipitation-hardened high-entropy alloys via a phase transformation at grain boundaries
Y. L. Qi et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
On the correlation between L12 nanoparticles and mechanical properties of (NiCo)52+2x(AlTi)4+2xFe29-4xCr15 (x=0-4) high-entropy alloys
Hanlin Peng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Control of nanoscale precipitation and elimination of intermediate-temperature embrittlement in multicomponent high-entropy alloys
T. Yang et al.
ACTA MATERIALIA (2020)
Microstructures and room temperature tensile properties of as-cast and directionally solidified AlCoCrFeNi2.1 eutectic high-entropy alloy
Lei Wang et al.
INTERMETALLICS (2020)
Ripening of L12 nanoparticles and their effects on mechanical properties of Ni28Co28Fe21Cr15Al4Ti4 high-entropy alloys
Hanlin Peng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Vanadium is an optimal element for strengthening in both fcc and bcc high-entropy alloys
Binglun Yin et al.
ACTA MATERIALIA (2020)
Superior high-temperature properties and deformation-induced planar faults in a novel L12-strengthened high-entropy alloy
Y. L. Zhao et al.
ACTA MATERIALIA (2020)
Dual heterogeneous structures lead to ultrahigh strength and uniform ductility in a Co-Cr-Ni medium-entropy alloy
X. H. Du et al.
NATURE COMMUNICATIONS (2020)
Tailoring microstructures and tensile properties of a precipitation-strengthened (FeCoNi)94Ti6 medium-entropy alloy
Y. Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
L21-strengthened face-centered cubic high-entropy alloy with high strength and ductility
Yongliang Qi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
High-strength Co-Al-V-base superalloys strengthened by γ′-Co3(Al,V) with high solvus temperature
Yuechao Chen et al.
ACTA MATERIALIA (2019)
Nanoparticles-strengthened high-entropy alloys for cryogenic applications showing an exceptional strength-ductility synergy
T. Yang et al.
SCRIPTA MATERIALIA (2019)
A two-stage predicting model for γ′ solvus temperature of L12-strengthened Co-base superalloys based on machine learning
Jinxin Yu et al.
INTERMETALLICS (2019)
Effects of heat treatment on the microstructure and properties of cold-forged CoNiFe medium entropy alloy
X. L. An et al.
INTERMETALLICS (2019)
Microstructures and mechanical properties of nano carbides reinforced CoCrFeMnNi high entropy alloys
Jianbo Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Superior tensile properties of Al0.3CoCrFeNi high entropy alloys with B2 precipitated phases at room and cryogenic temperatures
Q. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Novel NiAl-strengthened high entropy alloys with balanced tensile strength and ductility
Haoyan Diao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0.2 high-entropy alloy at room and cryogenic temperatures
Y. Tong et al.
ACTA MATERIALIA (2019)
gamma plus gamma ' microstructures in the Co-Ta-V and Co-Nb-V ternary systems
Fernando L. Reyes Tirado et al.
ACTA MATERIALIA (2018)
Combined strengthening from nanotwins and nanoprecipitates in an iron-based superalloy
B. B. Zhang et al.
ACTA MATERIALIA (2018)
Novel Co-Ti-V-base superalloys reinforced by L12-ordered γ' phase
J. J. Ruan et al.
INTERMETALLICS (2018)
Realizing strength-ductility combination of coarse-grained Al0.2Co1.5CrFeNi1.5Ti0.3 alloy via nano-sized, coherent precipitates
Kaisheng Ming et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
The Role of Carbon in Grain Refinement of Cast CrFeCoNi High-Entropy Alloys
X. W. Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Ultra-high strength and ductility from rolling and annealing of a Ni-Cr-Co superalloy
C. E. Slone et al.
SCRIPTA MATERIALIA (2018)
The microstructure and high-temperature properties of novel nano precipitation-hardened face centered cubic high-entropy superalloys
Lu Zhang et al.
SCRIPTA MATERIALIA (2018)
High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys
Yao-Jian Liang et al.
NATURE COMMUNICATIONS (2018)
Ductilizing brittle high-entropy alloys via tailoring valence electron concentrations or precipitates by controlled elemental partitioning
T. Yang et al.
MATERIALS RESEARCH LETTERS (2018)
Multicomponent intermetallic nanoparticles and superb mechanical behaviors of complex alloys
T. Yang et al.
SCIENCE (2018)
Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0.3CoCrFeNi high entropy alloy
B. Gwalani et al.
MATERIALS & DESIGN (2017)
Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy
Y. L. Zhao et al.
ACTA MATERIALIA (2017)
The effect of carbon on the microstructures, mechanical properties, and deformation mechanisms of thermo-mechanically treated Fe40.4Ni11.3Mn34.8Al17.5Cr6 high entropy alloys
Zhangwei Wang et al.
ACTA MATERIALIA (2017)
Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature range
Yiping Lu et al.
ACTA MATERIALIA (2017)
A precipitation-hardened high-entropy alloy with outstanding tensile properties
J. Y. He et al.
ACTA MATERIALIA (2016)
Ductile CoCrFeNiMox high entropy alloys strengthened by hard intermetallic phases
W. H. Liu et al.
ACTA MATERIALIA (2016)
Precipitation behavior and its effects on tensile properties of FeCoNiCr high-entropy alloys
J. Y. He et al.
INTERMETALLICS (2016)
Stability of ordered L12 and B2 precipitates in face centered cubic based high entropy alloys - Al0.3CoFeCrNi and Al0.3CuFeCrNi2
B. Gwalani et al.
SCRIPTA MATERIALIA (2016)
A new class of high strength high temperature Cobalt based γ-γ′ Co-Mo-Al alloys stabilized with Ta addition
S. K. Makineni et al.
ACTA MATERIALIA (2015)
Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures
Z. Wu et al.
ACTA MATERIALIA (2014)
Nanoindentation characterized initial creep behavior of a high-entropy-based alloy CoFeNi
Zhijun Wang et al.
INTERMETALLICS (2014)
Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys
Z. Wu et al.
INTERMETALLICS (2014)
A fracture-resistant high-entropy alloy for cryogenic applications
Bernd Gludovatz et al.
SCIENCE (2014)
The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy
F. Otto et al.
ACTA MATERIALIA (2013)
Tensile properties of high- and medium-entropy alloys
A. Gali et al.
INTERMETALLICS (2013)
Effect of Mo additions on microstructure and tensile behavior of a Co-Al-W-Ta-B alloy at room temperature
G. Feng et al.
SCRIPTA MATERIALIA (2012)
Tensile property and deformation behavior of a directionally solidified Ni-base superalloy
Zhaokuang Chu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Microband-induced plasticity in a high Mn-Al-C light steel
Je Doo Yoo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
分享论文
