相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Characterization of deformation-induced martensite with various AGSs upon Charpy impact loading and correlation with transformation mechanisms
Minghao Huang et al.
MATERIALS CHARACTERIZATION (2022)
Role of martensitic transformation sequences on deformation-induced martensitic transformation at high strain rates: A quasi in-situ study
Minghao Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Fundamentals and application of solid-state phase transformations for advanced high strength steels containing metastable retained austenite
Zongbiao Dai et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2021)
Grain size dependence of twinning behaviors and resultant cryogenic impact toughness in high manganese austenitic steel
Jun Chen et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)
High carbon alloyed design of a hot-rolled high-Mn austenitic steel with excellent mechanical properties for cryogenic application
Jia-kuan Ren et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Evaluation of strain-induced martensite formation and mechanical properties in N-alloyed austenitic stainless steels by in situ tensile tests
C. Quitzke et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effects of Al addition on tensile properties of partially recrystallized austenitic TRIP/TWIP steels
Min Chul Jo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
2.3 GPa cryogenic strength through thermal-induced and deformation-induced body-centered cubic martensite in a novel ferrous medium entropy alloy
Hyeonseok Kwon et al.
SCRIPTA MATERIALIA (2021)
Mechanism of twinning induced plasticity in austenitic lightweight steel driven by compositional complexity
Zen-Hao Lai et al.
ACTA MATERIALIA (2021)
Microstructure tailoring and impact toughness of a newly developed high strength Ti-5Al-3Mo-3V-2Cr-2Zr-1Nb-1Fe alloy
Cong Wu et al.
MATERIALS CHARACTERIZATION (2021)
The essential role of niobium in high manganese austenitic steel for application in liquefied natural gas tanks
Jun Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Making ultrastrong steel tough by grain-boundary delamination
L. Liu et al.
SCIENCE (2020)
Effects of Cr addition on Charpy impact energy in austenitic 0.45C-24Mn-(0,3,6)Cr steels
Seok Gyu Lee et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Deformation-induced martensite in austenitic stainless steels: A review
Mohammad Javad Sohrabi et al.
ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2020)
Superior cryogenic toughness of high-Mn austenitic steel by welding thermal cycles: The role of grain boundary evolution
H. H. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Enhancing strength and cryogenic toughness of high manganese TWIP steel plate by double strengthened structure design
Jia-kuan Ren et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Transformation-induced plasticity (TRIP) in advanced steels: A review
Maryam Soleimani et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
On mechanical properties of novel high-Mn cryogenic steel in terms of SFE and microstructural evolution
Q. Luo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing
Sara Kheiri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Influence of annealing temperature on microstructure, tensile properties and tensile deformation mechanism of metastable austenitic stainless steel repetitively cold-rolled and annealed
Jiaxin Zhang et al.
MATERIALIA (2019)
Hierarchical microstructure design of a bimodal grained twinning-induced plasticity steel with excellent cryogenic mechanical properties
Yu Li et al.
ACTA MATERIALIA (2018)
A general perspective of Fe-Mn-Al-C steels
O. A. Zambrano
JOURNAL OF MATERIALS SCIENCE (2018)
Influence of final rolling temperature on microstructure and mechanical properties in a hot-rolled TWIP steel for cryogenic application
Jun Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Multiple strengthening sources and adiabatic shear banding during high strain-rate deformation of AISI 321 austenitic stainless steel: Effects of grain size and strain rate
A. A. Tiamiyu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Influence of manganese content on ε-/α'-martensitic transformation and tensile properties of low-C high-Mn TRIP steels
Xing Li et al.
MATERIALS & DESIGN (2018)
Study of Deformation Behavior and Microstructural Evolution in Multiphase Steel
Jun Lu et al.
MATERIALS (2018)
The effects of prior austenite grain boundaries and microstructural morphology on the impact toughness of intercritically annealed medium Mn steel
Jeongho Han et al.
ACTA MATERIALIA (2017)
Synchrotron analysis of toughness anomalies in nanostructured bainite
L. C. D. Fielding et al.
ACTA MATERIALIA (2016)
Low cycle fatigue behavior in a medium-carbon carbide-free bainitic steel
J. Kang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Effect of microstructure evolution of the lamellar alpha on impact toughness in a two-phase titanium alloy
Jianwei Xu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Interpretation of cryogenic-temperature Charpy impact toughness by microstructural evolution of dynamically compressed specimens in austenitic 0.4C-(22-26)Mn steels
Hyunmin Kim et al.
ACTA MATERIALIA (2015)
Effects of Mn and Al contents on cryogenic-temperature tensile and Charpy impact properties in four austenitic high-Mn steels
Seok Su Sohn et al.
ACTA MATERIALIA (2015)
Interpretation of cryogenic-temperature Charpy fracture initiation and propagation energies by microstructural evolution occurring during dynamic compressive test of austenitic Fe-(0.4,1.0)C-18Mn steels
Hyunmin Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Combination of ductility and toughness by the design of fine ferrite/tempered martensite-austenite microstructure in a low carbon medium manganese alloyed steel plate
Jun Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Smaller is less stable: Size effects on twinning vs. transformation of reverted austenite in TRIP-maraging steels
M-M. Wang et al.
ACTA MATERIALIA (2014)
Study of crack propagation mechanisms during Charpy impact toughness tests on both equiaxed and lamellar microstructures of Ti-6Al-4V titanium alloy
Christophe Buirette et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effects of Dynamic Strain Hardening Exponent on Abnormal Cleavage Fracture Occurring During Drop Weight Tear Test of API X70 and X80 Linepipe Steels
Minju Kang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Effects of Mn Addition on Tensile and Charpy Impact Properties in Austenitic Fe-Mn-C-Al-Based Steels for Cryogenic Applications
Junghoon Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Unique serrated flow dependence of critical stress in a hot-rolled Fe-Mn-Al-C steel
Z. H. Cai et al.
SCRIPTA MATERIALIA (2014)
Forming of ellipse heads of large-scale austenitic stainless steel pressure vessel
Hui Wang et al.
11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014 (2014)
Kinetics of deformation processes in high-alloyed cast transformation-induced plasticity/twinning-induced plasticity steels determined by acoustic emission and scanning electron microscopy: Influence of austenite stability on deformation mechanisms
A. Vinogradov et al.
ACTA MATERIALIA (2013)
Strengthening and Toughening of a Heavy Plate Steel for Shipbuilding with Yield Strength of Approximately 690 MPa
Dongsheng Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2013)
Characterization of oxides of stainless steel UNS S30400 formed in offshore environment
M. Cindra Fonseca et al.
CORROSION SCIENCE (2012)
Toughness variations in nanostructured bainitic steels
Behzad Avishan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Microstructural characteristics and impact fracture behavior of a high-strength low-alloy steel treated by intercritical heat treatment
J. Kang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
被撤回的出版物: Simulation of impact energy in functionally graded steels (Retracted article. See vol. 214, 2022)
Ali Nazari et al.
COMPUTATIONAL MATERIALS SCIENCE (2011)
Correlation of austenite stability and ductile-to-brittle transition behavior of high-nitrogen 18Cr-10Mn austenitic steels
Byoungchul Hwang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Effect of microstructure on retained austenite stability and work hardening of TRIP steels
J. Chiang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
The conflicts between strength and toughness
Robert O. Ritchie
NATURE MATERIALS (2011)
Effect of grain size on strain-induced martensitic transformation start temperature in an ultrafine grained metastable austenitic steel
Yeon-Seung Jung et al.
METALS AND MATERIALS INTERNATIONAL (2011)
Fatigue properties of transformation-induced plasticity and dual-phase steels for auto-body lightweight: Experiment, modeling and application
Z. G. Hu et al.
MATERIALS & DESIGN (2010)
Strain-rate effects on the mechanical behavior of the AISI 300 series of austenitic stainless steel under cryogenic environments
Woong Sup Park et al.
MATERIALS & DESIGN (2010)
Effect of annealing temperature on the notch impact toughness of a laser melting deposited titanium alloy Ti-4Al-1.5Mn
X. J. Tian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
The effect of grain size and grain orientation on deformation twinning in a Fe-22 wt.% Mn-0.6 wt.% C TWIP steel
I. Gutierrez-Urrutia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effects of deformation-induced martensite and grain size on ductile-to-brittle transition behavior of austenitic 18Cr-10Mn-N stainless steels
Byoungchul Hwang et al.
METALS AND MATERIALS INTERNATIONAL (2010)
Effects of grain size on the properties of a low nickel austenitic stainless steel
A Di Schino et al.
JOURNAL OF MATERIALS SCIENCE (2003)
Grain size effects in the charpy impact energy of a thermally embrittled RPV steel
JR Tarpani et al.
JOURNAL OF MATERIALS SCIENCE (2003)
Relationship between stress-induced martensitic transformation and impact toughness in low carbon austenitic steels
MX Zhang et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Stress-induced martensitic transformation and impact toughness of cast irons and high-carbon Fe-Ni-C steel
MX Zhang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2001)
Driving force for γ→ε martensitic transformation and stacking fault energy of γ in Fe-Mn binary system
YK Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2000)
分享论文
