相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Laser powder bed fusion of functionally graded bi-materials: Role of VC on functionalizing AISI H13 tool steel
Morteza Narvan et al.
MATERIALS & DESIGN (2021)
Research on Cu-6.6%Al-3.2%Si Alloy by Dual Wire Arc Additive Manufacturing
Yanhu Wang et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)
Composition equivalents of stainless steels understood via gamma stabilizing efficiency
Shuqi Zhang et al.
SCIENTIFIC REPORTS (2021)
Oxide Evolution During the Solidification of 316L Stainless Steel from Additive Manufacturing Powders with Different Oxygen Contents
Xinliang Yang et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2021)
Non-oxide precipitates in additively manufactured austenitic stainless steel
Manas Vijay Upadhyay et al.
SCIENTIFIC REPORTS (2021)
The potential for grain refinement of Wire-Arc Additive Manufactured (WAAM) Ti-6Al-4V by ZrN and TiN inoculation
J. R. Kennedy et al.
ADDITIVE MANUFACTURING (2021)
Part deflection and residual stresses in laser powder bed fusion of H13 tool steel
Morteza Narvan et al.
MATERIALS & DESIGN (2021)
Revealing the Mechanisms of Grain Nucleation and Formation During Additive Manufacturing
Michael Bermingham et al.
JOM (2020)
In-situ dual wire arc additive manufacturing of NiTi-coating on Ti6Al4V alloys: Microstructure characterization and mechanical properties
Jun Wang et al.
SURFACE & COATINGS TECHNOLOGY (2020)
Influence of laser polishing on surface roughness and microstructural properties of the remelted surface boundary layer of tool steel H11
A. Temmler et al.
MATERIALS & DESIGN (2020)
Wire-Based Additive Manufacturing of Ti-6Al-4V Using Electron Beam Technique
Florian Pixner et al.
MATERIALS (2020)
Welding and additive manufacturing with nanoparticle-enhanced aluminum 7075 wire
Daniel Oropeza et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2020)
Fabrication of multi-element alloys by twin wire arc additive manufacturing combined with in-situ alloying
Zhenwen Yang et al.
MATERIALS RESEARCH LETTERS (2020)
Concurrent geometry- and material-based process identification and optimization for robotic CMT-based wire arc additive manufacturing
Thomas Lehmann et al.
MATERIALS & DESIGN (2020)
Wire and Arc Additive Manufacturing with TiC-Nanoparticle Reinforced AA5183 Alloy
Geir Langelandsvik et al.
17TH INTERNATIONAL CONFERENCE ON ALUMINIUM ALLOYS 2020 (ICAA17) (2020)
Development of Al-TiC Wire Feedstock for Additive Manufacturing by Metal Screw Extrusion
Geir Langelandsvik et al.
METALS (2020)
Influence of post treatment on microstructure, porosity and mechanical properties of additive manufactured H13 tool steel
M. Asberg et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
New Aluminum Alloys Specifically Designed for Laser Powder Bed Fusion: A Review
Alberta Aversa et al.
MATERIALS (2019)
Study on microstructure and tensile properties of high nitrogen Cr-Mn steel processed by CMT wire and arc additive manufacturing
Xiaoyong Zhang et al.
MATERIALS & DESIGN (2019)
The effects of non-metallic inclusions on properties relevant to the performance of steel in structural and mechanical applications
Andre Luiz Vasconcellos da Costa e Silva
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)
Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing
M. J. Bermingham et al.
ACTA MATERIALIA (2019)
Phase constituent control and correlated properties of titanium aluminide intermetallic alloys through dual-wire arc additive manufacturing
Jun Wang et al.
MATERIALS LETTERS (2019)
Heat treatment and properties of a hot work tool steel fabricated by additive manufacturing
Faraz Deirmina et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Wire arc additive manufacturing of hot work tool steel with CMT process
Y. Ali et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2019)
CMT Additive Manufacturing of a High Strength Steel Alloy for Application in Crane Construction
Josef Plangger et al.
METALS (2019)
Microstructure and Mechanical Properties of Medium Carbon Steel Deposits Obtained via Wire and Arc Additive Manufacturing Using Metal-Cored Wire
Zidong Lin et al.
METALS (2019)
Laser beam melting and heat-treatment of 1.2343 (AISI H11) tool steel - microstructure and mechanical properties
Florian Huber et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Study on Short-Circuiting GMAW Pool Behavior and Microstructure of the Weld with Different Waveform Control Methods
Tao Chen et al.
METALS (2019)
Flux-Cored Wire for Additive Manufacturing of Parts with Gradient Structure
V. G. Burov et al.
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019 (2019)
Metal Alloys for Fusion-Based Additive Manufacturing
Duyao Zhang et al.
ADVANCED ENGINEERING MATERIALS (2018)
General investigations on processing tool steel X40CrMoV5-1 with selective laser melting
Julian Krell et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
The double-wire feed and plasma arc additive manufacturing process for deposition in Cr-Ni stainless steel
Yuehai Feng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Design and cracking susceptibility of additively manufactured Al-Cu-Mg alloys with tandem wires and pulsed arc
Jianglong Gu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Oxide inclusions in laser additive manufactured stainless steel and their effects on impact toughness and stress corrosion cracking behavior
Xiaoyuan Lou et al.
JOURNAL OF NUCLEAR MATERIALS (2018)
Microstructure and mechanical behavior of hot-work tool steels processed by Selective Laser Melting
Riccardo Casati et al.
MATERIALS CHARACTERIZATION (2018)
Effect of trace lanthanum hexaboride and boron additions on microstructure, tensile properties and anisotropy of Ti-6Al-4V produced by additive manufacturing
M. J. Bermingham et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Characterization of wire arc additively manufactured titanium aluminide functionally graded material: Microstructure, mechanical properties and oxidation behaviour
Jun Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Processing of AISI H11 Tool Steel Powder Modified with Carbon Black Nanoparticles for the Additive Manufacturing of Forging Tools with Tailored Mechanical Properties by Means of Laser Metal Deposition (LMD)
Oliver Hentschel et al.
METALS (2018)
Investigation of Heat Treatment Strategies for Additively-Manufactured Tools of X37CrMoV5-1
Daniel Junker et al.
METALS (2018)
Grain refinement of wire arc additively manufactured titanium by the addition of silicon
S. Mereddy et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Laser direct deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness, and residual stresses
Neil S. Bailey et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
3D printing of high-strength aluminium alloys
John H. Martin et al.
NATURE (2017)
The effect of inter-layer cold working and post-deposition heat treatment on porosity in additively manufactured aluminum alloys
Jianglong Gu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2016)
Effect of environmental oxygen content on the oxide inclusion in laser solid formed AISI 420 stainless steel
Menghua Song et al.
MATERIALS & DESIGN (2016)
Controlling the microstructure and properties of wire arc additive manufactured Ti-6Al-4V with trace boron additions
M. J. Bermingham et al.
ACTA MATERIALIA (2015)
Wire-feed additive manufacturing of metal components: technologies, developments and future interests
Donghong Ding et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Characterization of In-Situ Alloyed and Additively Manufactured Titanium Aluminides
Yan Ma et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2014)
Causes of failure and repairing options for dies and molds: A review
S. Jhavar et al.
ENGINEERING FAILURE ANALYSIS (2013)
Modeling of bead section profile and overlapping beads with experimental validation for robotic GMAW-based rapid manufacturing
Jun Xiong et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2013)
Analysis of the failure mechanism of a gripping tool steel component operated in an industrial tube draw bench
George Pantazopoulos et al.
ENGINEERING FAILURE ANALYSIS (2011)
Overlapping model of beads and curve fitting of bead section for rapid manufacturing by robotic MAG welding process
Yong Cao et al.
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING (2011)
Characteristics of laser aided direct metal/material deposition process for tool steel
J Choi et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
A comparison of tool-repair methods using CO2 laser surfacing and arc surfacing
J Grum et al.
APPLIED SURFACE SCIENCE (2003)
分享论文
