☆ 4.7 Article

Xanthate-Based Photoiniferter RAFT Polymerization toward Oxygen-Tolerant and Rapid Living 3D Printing

MACROMOLECULES (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Nanostructure Control in 3D Printed Materials

Valentin A. Bobrin et al.

Summary: A novel approach for fabricating materials with controlled nanoscale morphologies using Digital Light Processing 3D printing technique has been demonstrated. This method utilizes reversible deactivation radical polymerization to control the microphase separation of printing resins, resulting in materials with enhanced mechanical properties.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Photoinduced Dual-Wavelength Approach for 3D Printing and Self-Healing of Thermosetting Materials

Zhiheng Zhang et al.

Summary: In this study, RAFT agents were incorporated into resin formulations to allow for visible light-mediated 3D printing of materials with self-healing capabilities. The self-healing process is based on the reactivation of RAFT agent embedded in the thermosets under UV light, enabling reformation of the polymeric network. Resins containing RAFT agents enable 3D printing of thermosets with self-healing properties, expanding the potential applications in various fields.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2022)

添加到收藏夹

Review Polymer Science

Photo-Iniferter RAFT Polymerization

Matthias Hartlieb

Summary: Light-mediated RAFT polymerization offers advantages such as high spatial and temporal control, versatility with various monomers, and operation under mild conditions. The use of light to drive the RAFT process is possible through multiple pathways, including direct activation of the chain transfer agent in a photo-iniferter process.

MACROMOLECULAR RAPID COMMUNICATIONS (2022)

添加到收藏夹

Article Engineering, Biomedical

The selection of photoinitiators for photopolymerization of biodegradable polymers and its application in digital light processing additive manufacturing

Chia-Chun Wang et al.

Summary: By investigating the application of different photoinitiators in photopolymer resins, it was found that vitamin B2 combined with triethanolamine (B2/TEOA) has a wider light absorbance range and good support for cell proliferation, making it a promising photoinitiator for 3D printing.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Living Polymer Networks Based on a RAFT Cross-Linker: Toward 3D and 4D Printing Applications

Ali Bagheri et al.

Summary: This study focuses on controlled modification of the structure and properties of 3D printed polymers using a novel cross-linker, opening up new possibilities for the fabrication of advanced functional materials in the field of 3D printing.

ACS APPLIED POLYMER MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rapid High-Resolution 3D Printing and Surface Functionalization via Type I Photoinitiated RAFT Polymerization

Kenny Lee et al.

Summary: RAFT-mediated 3D printing with a photoinitiator allows for rapid curing of resins and high printing rates. By incorporating low concentrations of divinyl comonomers into the initial resins, materials containing thiocarbonylthio groups can be produced for diverse applications. Additionally, the inclusion of RAFT agents improves printing resolution and allows for controlled post-printing transformations on object surfaces.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Polymer Science

Effect of Thiocarbonylthio Compounds on Visible-Light-Mediated 3D Printing

Zhiheng Zhang et al.

Summary: The study investigates the impact of different RAFT agents on the 3D printing process, finding that the Z and R groups of RAFT agents affect polymerization kinetics, cure time, and mechanical properties of the printed materials. Additionally, the study reveals that the concentration of trithiocarbonates also influences the mechanical properties of the materials.

MACROMOLECULES (2021)

添加到收藏夹

Article Polymer Science

Photoinduced Free Radical Promoted Cationic RAFT Polymerization toward Living 3D Printing

Bowen Zhao et al.

Summary: A photoinduced polymerization technique is reported in this study, which can achieve controlled molecular weights and narrow dispersity of polymers at different wavelengths, and can also be used for producing 3D printed objects of varying thicknesses utilizing stereolithography.

ACS MACRO LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

PET-RAFT facilitated 3D printable resins with multifunctional RAFT agents

Xiaobing Shi et al.

Summary: This study explores the use of multi-arm RAFT agents in model photoresins for 3D printing, achieving efficient printing under ultra-low intensity green-light. Optimization of printing conditions enhances the storage modulus and glass transition temperature of printed parts, with the ability to control material mechanical properties by changing the concentration and functionality of RAFT agents.

MATERIALS CHEMISTRY FRONTIERS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Designing with Light: Advanced 2D, 3D, and 4D Materials

Kenward Jung et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Toxicology

Biocompatibility and cytotoxicity of novel photoinitiator π-conjugated dithienophosphole derivatives and their triggered polymers

Shuhui Wang et al.

TOXICOLOGY IN VITRO (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Photopolymerizable Biomaterials and Light-Based 3D Printing Strategies for Biomedical Applications

Claire Yu et al.

CHEMICAL REVIEWS (2020)

添加到收藏夹

Review Polymer Science

Reversible-deactivation radical polymerization (Controlled/living radical polymerization): From discovery to materials design and applications

Nathaniel Corrigan et al.

PROGRESS IN POLYMER SCIENCE (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Progress and Perspectives Beyond Traditional RAFT Polymerization

Mitchell D. Nothling et al.

ADVANCED SCIENCE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Oxygen Tolerant PET-RAFT Facilitated 3D Printing of Polymeric Materials under Visible LEDs

Ali Bagheri et al.

ACS APPLIED POLYMER MATERIALS (2020)

添加到收藏夹

Review Engineering, Biomedical

Photo-curing 3D printing technique and its challenges

Haoyuan Quan et al.

BIOACTIVE MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Versatile 3D and 4D Printing System through Photocontrolled RAFT Polymerization

Zhiheng Zhang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2019)

添加到收藏夹

Article Polymer Science

Investigation into the Direct Photolysis Process of Photo-Induced RAFT Polymerization by ESR Spin Trapping

Jiajia Li et al.

POLYMERS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Photopolymerization in 3D Printing

Ali Bagheri et al.

ACS APPLIED POLYMER MATERIALS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Novel Materials for 3D Printing by Photopolymerization

Michael Layani et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Polymer Science

Visible Light-Induced Living Radical Polymerization of Butyl Acrylate: Photocatalyst-Free, Ultrafast, and Oxygen Tolerance

Jiajia Li et al.

MACROMOLECULAR RAPID COMMUNICATIONS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Living Additive Manufacturing: Transformation of Parent Gels into Diversely Functionalized Daughter Gels Made Possible by Visible Light Photoredox Catalysis

Mao Chen et al.

ACS CENTRAL SCIENCE (2017)

添加到收藏夹

Article Polymer Science

Raft Polymerization of N,N-Dimethylacrylamide from Magnetic Poly(2-hydroxyethyl methacrylate) Microspheres to Suppress Nonspecific Protein Adsorption

Xueteng Cao et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Light-Controlled Radical Polymerization: Mechanisms, Methods, and Applications

Mao Chen et al.

CHEMICAL REVIEWS (2016)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Reduced glutathione prevents camphorquinone-induced apoptosis in human oral keratinocytes

Joachim Volk et al.

DENTAL MATERIALS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel one-component polymeric benzophenone photoinitiator containing poly (ethylene glycol) as hydrogen donor

Kemin Wang et al.

MATERIALS CHEMISTRY AND PHYSICS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Photo-controlled Growth of Telechelic Polymers and End-linked Polymer Gels

Huaxing Zhou et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2013)

添加到收藏夹

Article Polymer Science

Synthesis of block and graft copolymers of styrene by raft polymerization, using dodecyl-based trithiocarbonates as initiators and chain transfer agents

Kannukaran Ponnusamy et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2013)

添加到收藏夹

Article Engineering, Electrical & Electronic

Fabrication and characterization of SRN/SU-8 bimorph cantilevers for temperature sensing

Tom Larsen et al.

MICROELECTRONIC ENGINEERING (2011)

添加到收藏夹

Article Chemistry, Organic

Selective one-pot synthesis of trithiocarbonates, xanthates, and dithiocarbamates for use in RAFT/MADIX living radical polymerizations

MR Wood et al.

ORGANIC LETTERS (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.