相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Fretting-corrosion in hip taper modular junctions: The influence of topography and pH levels - An in-vitro study
Dmitry Royhman et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
A Crevice Corrosion Model for Biomedical Trunnion Geometries and Surfaces Feature
Angela Bermudez-Castaneda et al.
MATERIALS (2021)
Taper junctions in modular hip joint replacements: What affects their stability?
Ulrike Mueller et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2021)
Are Damage Modes Related to Microstructure and Material Loss in Severely Damaged CoCrMo Femoral Heads?
Stephanie M. McCarthy et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2021)
Micromotion at the head-stem taper junction of total hip prostheses is influenced by prosthesis design-, patient- and surgeon-related factors
Adrian Falkenberg et al.
JOURNAL OF BIOMECHANICS (2020)
Contact conditions for total hip head-neck modular taper junctions with microgrooved stem tapers
Maren Bechstedt et al.
JOURNAL OF BIOMECHANICS (2020)
Design, Material, and Seating Load Effects on In Vitro Fretting Corrosion Performance of Modular Head-Neck Tapers
Eric S. Ouellette et al.
JOURNAL OF ARTHROPLASTY (2019)
Variation in Taper Surface Roughness for a Single Design Effects the Wear Rate in Total Hip Arthroplasty
Robert K. Whittaker et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2017)
Same Same but Different? 12/14 Stem and Head Tapers in Total Hip Arthroplasty
Ulrike Mueller et al.
JOURNAL OF ARTHROPLASTY (2017)
Do Stem Taper Microgrooves Influence Taper Corrosion in Total Hip Arthroplasty? A Matched Cohort Retrieval Study
Christina M. Arnholt et al.
JOURNAL OF ARTHROPLASTY (2017)
Does a micro-grooved trunnion stem surface finish improve fixation and reduce fretting wear at the taper junction of total hip replacements? A finite element evaluation
Ariyan Ashkanfar et al.
JOURNAL OF BIOMECHANICS (2017)
Otto Aufranc Award: Large Heads Do Not Increase Damage at the Head-neck Taper of Metal-on-polyethylene Total Hip Arthroplasties
Georgios K. Triantafyllopoulos et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2016)
Flexural Rigidity, Taper Angle, and Contact Length Affect Fretting of the Femoral Stem Trunnion in Total Hip Arthroplasty
Ying-Ying J. Kao et al.
JOURNAL OF ARTHROPLASTY (2016)
Fretting and Corrosion in Modular Shoulder Arthroplasty: A Retrieval Analysis
Johannes A. Eckert et al.
BIOMED RESEARCH INTERNATIONAL (2016)
Corrosion and Fretting of a Modular Hip System: A Retrieval Analysis of 60 Rejuvenate Stems
Ivan De Martino et al.
JOURNAL OF ARTHROPLASTY (2015)
Shorter, rough trunnion surfaces are associated with higher taper wear rates than longer, smooth trunnion surfaces in a contemporary large head metal-on-metal total hip arthroplasty system
Timothy M. Brock et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2015)
Influence of stem type on material loss at the metal-on-metal pinnacle taper junction
Harry S. Hothi et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE (2015)
The effect of frictional torque and bending moment on corrosion at the taper interface AN IN VITRO STUDY
A. Panagiotidou et al.
BONE & JOINT JOURNAL (2015)
Direct in vivo inflammatory cell-induced corrosion of CoCrMo alloy orthopedic implant surfaces
Jeremy L. Gilbert et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2015)
Taper Design Affects Failure of Large-head Metal-on-metal Total Hip Replacements
Nader A. Nassif et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2014)
What is the Trouble With Trunnions?
Christina I. Esposito et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2014)
The Reliability of a Scoring System for Corrosion and Fretting, and Its Relationship to Material Loss of Tapered, Modular Junctions of Retrieved Hip Implants
Harry S. Hothi et al.
JOURNAL OF ARTHROPLASTY (2014)
Do Ceramic Femoral Heads Reduce Taper Fretting Corrosion in Hip Arthroplasty? A Retrieval Study
Steven M. Kurtz et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2013)
Is Increased Modularity Associated With Increased Fretting and Corrosion Damage in Metal-On-Metal Total Hip Arthroplasty Devices? A Retrieval Study
Genymphas B. Higgs et al.
JOURNAL OF ARTHROPLASTY (2013)
Wear patterns of taper connections in retrieved large diameter metal-on-metal bearings
Nicholas Bishop et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2013)
Enhanced Wear and Corrosion in Modular Tapers in Total Hip Replacement Is Associated With the Contact Area and Surface Topography
Anna Panagiotidou et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2013)
Material Loss at the Taper Junction of Retrieved Large Head Metal-on-Metal Total Hip Replacements
Ashley K. Matthies et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2013)
Influence of assembly procedure and material combination on the strength of the taper connection at the head-neck junction of modular hip endoprostheses
Annelie Rehmer et al.
CLINICAL BIOMECHANICS (2012)
Taper junction failure in large-diameter metal-on-metal bearings
D. J. Langton et al.
BONE & JOINT RESEARCH (2012)
Wear analysis of unicondylar mobile bearing and fixed bearing knee systems: A knee simulator study
J. Philippe Kretzer et al.
ACTA BIOMATERIALIA (2011)
High failure rates with a large-diameter hybrid metal-on-metal total hip replacement CLINICAL, RADIOLOGICAL AND RETRIEVAL ANALYSIS
B. J. R. F. Bolland et al.
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME (2011)
Biotribology of alternative bearing materials for unicompartmental knee arthroplasty
Thomas M. Grupp et al.
ACTA BIOMATERIALIA (2010)
Determination of Low Wear Rates in Metal-On-Metal Hip Joint Replacements Based on Ultra Trace Element Analysis in Simulator Studies
J. P. Kretzer et al.
TRIBOLOGY LETTERS (2010)
Metal release and corrosion effects of modular neck total hip arthroplasty
J. Philippe Kretzer et al.
INTERNATIONAL ORTHOPAEDICS (2009)
Validation of ultratrace analysis of Co, Cr, Mo and Ni in whole blood, serum and urine using ICP-SMS
Michael Krachler et al.
JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY (2009)
In Vivo Severe Corrosion and Hydrogen Embrittlement of Retrieved Modular Body Titanium Alloy Hip-Implants
Danieli C. Rodrigues et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2009)
Special modes of corrosion under physiological and simulated physiological conditions
S. Virtanen et al.
ACTA BIOMATERIALIA (2008)
Effect of impact assembly on the fretting corrosion of modular hip tapers
ML Mroczkowski et al.
JOURNAL OF ORTHOPAEDIC RESEARCH (2006)
The influence of design, materials and kinematics on the in vitro wear of total knee replacements
HMJ McEwen et al.
JOURNAL OF BIOMECHANICS (2005)
Effect of hydrogen peroxide on titanium surfaces:: In situ imaging and step-polarization impedance spectroscopy of commercially pure titanium and titanium, 6-aluminum, 4-vanadium
JP Bearinger et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2003)
Metrology to quantify wear and creep of polyethylene tibial knee inserts
OK Muratoglu et al.
CLINICAL ORTHOPAEDICS AND RELATED RESEARCH (2003)
In vitro corrosion testing of modular hip tapers
JR Goldberg et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2003)
Effect of surface roughness of self-mated alumina on friction and wear in isooctane-lubricated reciprocating sliding contact
U Dulias et al.
WEAR (2002)