相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Electric current-assisted direct joining of silicon carbide
Huaxin Li et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Joining of Ti-coated monolithic SiC using a SiCw/Ti3SiC2 filler by electric field-assisted sintering
Teng Yu et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
TiAl/IN718 dissimilar brazing with TiZrNiCuCo high-entropy filler metal: phase characterization and fractography
Dariush Kokabi et al.
WELDING IN THE WORLD (2021)
Joining of SiC ceramics using the Ni-Mo filler alloy for heat exchanger applications
Zikang Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2021)
Solid-state joining of SiC using a thin Ti3AlC2, TiC, or Ti filler
Pipit Fitriani et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Almost seamless joining of SiC using an in-situ reaction transition phase of Y3Si2C2
Xiaobing Zhou et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Fabrication of SiCw/Ti3SiC2composites with improved thermal conductivity and mechanical properties using spark plasma sintering
Xiaobing Zhou et al.
JOURNAL OF ADVANCED CERAMICS (2020)
A novel high entropy CoFeCrNiCu alloy filler to braze SiC ceramics
Gang Wang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
Alloying behavior and thermal stability of mechanically alloyed nano AlCoCrFeNiTi high-entropy alloy
Vikas Shivam et al.
JOURNAL OF MATERIALS RESEARCH (2019)
Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior
Guiwu Liu et al.
JOURNAL OF ADVANCED CERAMICS (2019)
The effect of oxide, carbide, nitride and boride additives on properties of pressureless sintered SiC: A review
Mandi Khodaei et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Nano-infiltration and transient eutectic (NITE) phase joining SiC ceramics at 1500°C
Li-Xiang Wu et al.
CERAMICS INTERNATIONAL (2019)
Seamless joining of silicon carbide ceramics through an sacrificial interlayer Of Dy3Si2C2
Peng Wan et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Effect of BNNTs/matrix interface tailoring on toughness and fracture morphology of hierarchical SiCf/SiC composites
Guangxiang Zhu et al.
JOURNAL OF ADVANCED CERAMICS (2019)
Influence of interfacial reaction on reactive wettability of molten Ag-Cu-X wt.%Ti filler metal on SiC ceramic substrate and mechanism analysis
Jian Yang et al.
APPLIED SURFACE SCIENCE (2018)
Microstructure evolution of SiC/SiC joints during ultrasonic-assisted air bonding using a Sn-Zn-Al alloy
Bingzhi Wu et al.
CERAMICS INTERNATIONAL (2018)
Microstructure and properties of SiCf/SiC joint brazed by Y-Al-Si-O glass
Shangwu Fan et al.
CERAMICS INTERNATIONAL (2018)
SiC ceramics joined with an in-situ reaction gradient layer of TiC/Ti3SiC2 and interface stress distribution simulations
Xiaobing Zhou et al.
CERAMICS INTERNATIONAL (2018)
Residual thermal stress of SiC/Ti3SiC2/SiC joints calculation and relaxed by postannealing
Xiaobing Zhou et al.
INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY (2018)
Experimental and numerical studies on the sluggish diffusion in face centered cubic Co-Cr-Cu-Fe-Ni high-entropy alloys
Rui Wang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2018)
Recent progress in the development of SiC composites for nuclear fusion applications
T. Koyanagi et al.
JOURNAL OF NUCLEAR MATERIALS (2018)
CaO-Al2O3 glass-ceramic as a joining material for SiC based components: A microstructural study of the effect of Si-ion irradiation
Valentina Casalegno et al.
JOURNAL OF NUCLEAR MATERIALS (2018)
Joining of SiC monoliths using a thin MAX phase tape and the elimination of joining layer by solid-state diffusion
Pipit Fitriani et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Wetting of SiC by Al-Ti alloys and joining by in-situ formation of interfacial Ti3Si(Al)C-2
Fabrizio Valenza et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2018)
Laser brazing of a nickel-based superalloy using a Ni-Mn-Fe-Co-Cu high entropy alloy filler metal
Denzel Bridges et al.
MATERIALS LETTERS (2018)
Joining of SiCf/SiC using a Ti3AlC2 filler and subsequent elimination of the joining layer
Pipit Fitriani et al.
CERAMICS INTERNATIONAL (2018)
Friction stir welding of a carbon-doped CoCrFeNiMn high-entropy alloy
D. Shaysultanov et al.
MATERIALS CHARACTERIZATION (2018)
Review of flash sintering: materials, mechanisms and modelling
Min Yu et al.
ADVANCES IN APPLIED CERAMICS (2017)
High temperature properties of the monolithic CVD β-SiC materials joined with a pre-sintered MAX phase Ti3SiC2 interlayer via solid-state diffusion bonding
Peter Tatarko et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Thickness-dependent phase evolution and bonding strength of SiC ceramics joints with active Ti interlayer
Hui Yang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Brazing of silicon carbide ceramics with Ni-Si-Ti powder mixtures
W. B. Tian et al.
JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY (2017)
Joining of carbon fiber reinforced carbon composites with Ti3SiC2 tape film by electric field assisted sintering technique
Xiaobing Zhou et al.
CARBON (2016)
Joining of CVD-SiC coated and uncoated fibre reinforced ceramic matrix composites with pre-sintered Ti3SiC2 MAX phase using Spark Plasma Sintering
Peter Tatarko et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2016)
Joining of Cf/SiC composite with AuNi(Cu)-Cr brazing fillers and interfacial reactions
Bo Chen et al.
WELDING IN THE WORLD (2016)
Interfacial microstructure and mechanical properties of ZrB2-SiC-C ceramic and GH99 superalloy joints brazed with a Ti-modified FeCoNiCrCu high-entropy alloy
L. X. Zhang et al.
MATERIALS & DESIGN (2016)
Alloying behavior and novel properties of CoCrFeNiMn high-entropy alloy fabricated by mechanical alloying and spark plasma sintering
Wei Ji et al.
INTERMETALLICS (2015)
Microstructure and Property of AlN Joint Brazed with Au-Pd-Co-Ni-V Brazing Filler
Bo Chen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2015)
Fast joining SiC ceramics with Ti3SiC2 tape film by electric field-assisted sintering technology
Xiaobing Zhou et al.
JOURNAL OF NUCLEAR MATERIALS (2015)
Continuous SiC fiber, CVI SiC matrix composites for nuclear applications: Properties and irradiation effects
Yutai Katoh et al.
JOURNAL OF NUCLEAR MATERIALS (2014)
Rapid Bonding of Ti3SiC2 and Ti3AlC2 by Pulsed Electrical Current Heating
Lu Shen et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2014)
Joining of C/SiC composites by spark plasma sintering technique
Stefano Rizzo et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
Joining of β-SiC by spark plasma sintering
Salvatore Grasso et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2014)
(Fe,Cr)7C3/Fe surface gradient composite: Microstructure, microhardness, and wear resistance
Fangxia Ye et al.
MATERIALS CHEMISTRY AND PHYSICS (2014)
Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys
K. -Y. Tsai et al.
ACTA MATERIALIA (2013)
Microstructure and properties of Al2CrFeCoCuTiNix high-entropy alloys prepared by laser cladding
Xing-Wu Qiu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
Fabrication of C/SiC composites by combining liquid infiltration process and spark plasma sintering technique
Alba Centeno et al.
CERAMICS INTERNATIONAL (2012)
Survey on wetting of SiC by molten metals
G. W. Liu et al.
CERAMICS INTERNATIONAL (2010)
Synthesis and properties of multiprincipal component AlCoCrFeNiSix alloys
J. M. Zhu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Joining of sintered silicon carbide using ternary Ag-Cu-Ti active brazing alloy
Y. Liu et al.
CERAMICS INTERNATIONAL (2009)
Effect of pulsed DC current on atomic diffusion of Nb-C diffusion couple
Takayuki Kondo et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Influence of pulsed DC current and electric field on growth of carbide ceramics during spark plasma sintering
Takayuki Kondo et al.
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN (2008)
Directional electromigration-enhanced interdiffususion in the Cu-Ni system
Jinfeng Zhao et al.
JOURNAL OF APPLIED PHYSICS (2007)
Handbook of SiC properties for fuel performance modeling
Lance L. Snead et al.
JOURNAL OF NUCLEAR MATERIALS (2007)
Novel microstructure and properties of multicomponent CoCrCuFeNiTix alloys
X. F. Wang et al.
INTERMETALLICS (2007)
Microstructure and dry-sliding wear resistance of PTA clad (Cr, Fe)7C3/γ-Fe ceramal composite coating
Yuan-Fu Liu et al.
APPLIED SURFACE SCIENCE (2006)
The effect of electric field and pressure on the synthesis and consolidation of materials: A review of the spark plasma sintering method
ZA Munir et al.
JOURNAL OF MATERIALS SCIENCE (2006)
Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element
A Takeuchi et al.
MATERIALS TRANSACTIONS (2005)
Fundamental investigations on the spark plasma sintering/synthesis process III. Current effect on reactivity
U Anselmi-Tamburini et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Fabrication and mechanical evaluation of SiC-TiC nanocomposites by SPS
YM Luo et al.
MATERIALS LETTERS (2004)
Evidence of electron-stimulated self-diffusion in GaN crystals
Y Mera et al.
PHYSICA B-CONDENSED MATTER (2003)
Enhanced growth of intermetallic phases in the Ni-Ti system by current effects
JE Garay et al.
ACTA MATERIALIA (2003)
Calculations of mixing enthalpy and mismatch entropy for ternary amorphous alloys
A Takeuchi et al.
MATERIALS TRANSACTIONS JIM (2000)