相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Joining of SiO2glass and 316L stainless steel using Bi-Ag-based active solders
Felix Weber et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Cold joining of fused silica: Bonding pressure and surface roughness effects
Daoyao Ke et al.
MATERIALS LETTERS (2021)
Chemical bonding, thermodynamic stability and mechanical strength of Ni3Ti/α -Al2O3 interfaces by first-principles study
Lu Chen et al.
SCRIPTA MATERIALIA (2021)
Nondestructive evaluation of micro-oxide inclusions in additively manufactured metal parts using nonlinear ultrasonic technique
Seong-Hyun Park et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2021)
Elucidation of void defects by soft reduction in medium carbon steel via EBSD and X-ray computed tomography
Naqash Ali et al.
MATERIALS & DESIGN (2021)
Joining of SiO2 ceramic and TC4 alloy by nanoparticles modified brazing filler metal
Hong Bian et al.
CHINESE JOURNAL OF AERONAUTICS (2020)
Joining of SiO2f/SiO2 composite to Nb using Ag-Cu-In-Ti brazing alloys
Bo Chen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)
Carbothermal reduction reaction enhanced wettability and brazing strength of AgCuTi-SiO2f/SiO2 system
Zhan Sun et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
SiO2-SiO2 die-to-wafer direct bonding interface weakening
Toshiyuki Tabata et al.
MICROELECTRONICS RELIABILITY (2020)
Understanding the influence of Lu, La and Ga active elements on the bonding properties of Sn/SiO2 interfaces from first principle calculations
Weibing Guo et al.
CERAMICS INTERNATIONAL (2020)
Adhesive-free bonding homogenous fused-silica Fabry-Perot optical fiber low pressure sensor in harsh environments by CO2 laser welding
Wang Wenhua et al.
OPTICS COMMUNICATIONS (2019)
Picosecond laser welding of glasses with a large gap by a rapid oscillating scan
Hang Chen et al.
OPTICS LETTERS (2019)
Effects of Ti content on the wetting behavior and chemical reaction in AgCuTi/SiO2 system
Chenglai Xin et al.
VACUUM (2019)
Joining pre-oxidized dense Si3N4 to porous Si3N4 with β-spodumene based glass-ceramic interlayer
Liangbo Sun et al.
APPLIED SURFACE SCIENCE (2019)
Ultrathin adhesive layer between LiNbO3 and SiO2 for bonded LNOI waveguide applications
Ryo Takigawa et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2019)
Glass-Cu joining by anodic bonding and soldering with eutectic Sn-9Zn solder
Lifang Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Microstructure evolution and mechanical properties of porous Si3N4 and dense Si3N4 joints bonded using CaO Li2O-Al2O3 SiO2 glass-ceramic
Jian Fang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Anodic bondable Li-Na-Al-B-Si-O glass-ceramics for Si - ULTCC heterogeneous integration
Guanyu Chen et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Insights into the Osteogenic Differentiation of Mesenchymal Stem Cells on Crystalline and Vitreous Silica
Guohui Shou et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2019)
Reactive brazing of silicon nitride to Invar alloy using Ni foam and AgCuTi intermediate layers
Wei Guo et al.
CERAMICS INTERNATIONAL (2019)
Ultrafast laser welding of ceramics
E. H. Penilla et al.
SCIENCE (2019)
In situ formation of TiB whiskers to reinforce SiO2-BN/Ti6Al4V brazed joints
Jin Ba et al.
CERAMICS INTERNATIONAL (2019)
Wetting of AgCuTi alloys on quartz fiber reinforced composite modified by vertically aligned carbon nanotubes
L. X. Zhang et al.
CARBON (2019)
Ultra-low energy joining: An invisible strong bond at room temperature
Daoyao Ke et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)
Cu/SiO2 hybrid bonding obtained by surface-activated bonding method at room temperature using Si ultrathin films
Jun Utsumi et al.
MICRO AND NANO ENGINEERING (2019)
A review on glass welding by ultra-short laser pulses
Kristian Cvecek et al.
INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2019)
Interfacial microstructures formation mechanism between SiO2 substrate and AgCuTi braze alloys
Chenglai Xin et al.
CERAMICS INTERNATIONAL (2018)
Brazing of SiO2-BN modified with in situ synthesized CNTs to Ti6Al4V alloy by TiZrNiCu brazing alloy
J. Ba et al.
CERAMICS INTERNATIONAL (2018)
Carbon nanotubes-reinforced Ni foam interlayer for brazing SiO2-BN with Ti6A14V alloy using TiZrNiCu brazing alloy
Jin Ba et al.
CERAMICS INTERNATIONAL (2018)
Brazing of SiO2f/SiO2 composite to Invar using a graphene-modified Cu-23Ti braze filler
Z. Sun et al.
CERAMICS INTERNATIONAL (2018)
Room-temperature wafer bonding of LiNbO3 and SiO2 using a modified surface activated bonding method
Ryo Takigawa et al.
JAPANESE JOURNAL OF APPLIED PHYSICS (2018)
Active brazed Invar-SiO2f/SiO2 joint using a low-expansion composite interlayer
Z. Sun et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Glass-Copper anodic bonding through activated Sn-0.6Al solder
Guangjie Feng et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Study on the mechanism of Si-glass-Si two step anodic bonding process
Lifang Hu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2018)
The effect of crystal structure of SiO2 on the wettability of AgCuTi-SiO2f/SiO2 system
Q. Ma et al.
VACUUM (2018)
Joining of SiO2f/SiO2 composite to Al2O3 ceramic using AgCu-Ti brazing filler metal
Shi-Biao Wu et al.
WELDING IN THE WORLD (2017)
Anodic bonding of titanium alloy with bioactive glass
Eduardo Mioduski Szesz et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2017)
Microstructure evolution during air bonding of Al2O3 to Al2O3 joints using bismuth-borate-zinc glass
Wei Guo et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2017)
Effects of active element Ti on interfacial microstructure and bonding strength of SiO2/SiO2 joints soldered using Sn3.5Ag4Ti(Ce,Ga) alloy filler
L. X. Cheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Laser welding of fused silica glass with sapphire using a non-stoichiometric, fresnoitic Ba2TiSi2O8•3 SiO2 thin film as an absorber
A. de Pablos-Martin et al.
OPTICS AND LASER TECHNOLOGY (2017)
Interfacial microstructure and improved wetting mechanism of SiO2f/SiO2 brazed with Nb by plasma treatment
Jinghuang Lin et al.
VACUUM (2017)
Interfacial microstructure and mechanical property of brazed copper/SiO2 ceramic joint
Y. Y. Song et al.
VACUUM (2017)
Joining of SiO2f/SiO2 composite to Ti-6Al-4V using Ag-Cu-In-Ti brazing fillers, the joint strengths, and microstructures
Chen Bo et al.
WELDING IN THE WORLD (2017)
Room Temperature SiC-SiO2 Wafer Bonding Enhanced by Using an Intermediate Si Nano Layer
F. Mu et al.
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY (2017)
The relation between residual stress, interfacial structure and the joint property in the SiO2f/SiO2-Nb joints
Qiang Ma et al.
SCIENTIFIC REPORTS (2017)
Control interfacial microstructure and improve mechanical properties of TC4-SiO2f/SiO2 joint by AgCuTi with Cu foam as interlayer
Jing Huang Lin et al.
CERAMICS INTERNATIONAL (2016)
Characterisation of weld zone reactions in dissimilar glass-to-aluminium pulsed picosecond laser welds
Octav P. Ciuca et al.
MATERIALS CHARACTERIZATION (2016)
Regulating the surface structure of SiO2f/SiO2 composite for assisting in brazing with Nb
Qiang Ma et al.
MATERIALS LETTERS (2016)
Delamination of bonding Interface between benzocyclobutene (BCB) and silicon dioxide/silicon nitride
Fan Bu et al.
MICROELECTRONICS RELIABILITY (2016)
Microstructure and mechanical response of the SiO2f/SiO2 composite and Invar alloy joints brazed with an AgCuTi alloy
Z. Sun et al.
MATERIALS & DESIGN (2016)
Combined Surface Activated Bonding Technique for Hydrophilic SiO2-SiO2 and Cu-Cu Bonding
Ran He et al.
SEMICONDUCTOR WAFER BONDING: SCIENCE, TECHNOLOGY AND APPLICATIONS 14 (2016)
Toward laser welding of glasses without optical contacting
S. Richter et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2015)
Effective cleaning process and its influence on surface roughness in anodic bonding for semiconductor device packaging
Robin Joyce et al.
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2015)
Avoiding the requirement for pre-existing optical contact during picosecond laser glass-to-lass welding
Jianyong Chen et al.
OPTICS EXPRESS (2015)
Gap bridging in joining of glass using ultra short laser pulses
Kristian Cvecek et al.
OPTICS EXPRESS (2015)
Wafer level hermetic sealing of MEMS devices with vertical feedthroughs using anodic bonding
Mustafa Mert Torunbalci et al.
SENSORS AND ACTUATORS A-PHYSICAL (2015)
Brazing of SiO2f/SiO2 composite modified with few-layer graphene and Invar using AgCuTi alloy
Z. Sun et al.
MATERIALS & DESIGN (2015)
A new method for fast anodic bonding in microsystem technology
Kulwant Singh et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2014)
Microstructure of Aluminum/Glass Joint Bonded by Ultrasonic Wire Welding
Chihiro Iwamoto
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Gas bubble formation in fused silica generated by ultra-short laser pulses
Kristian Cvecek et al.
OPTICS EXPRESS (2014)
Friction spot welding of PMMA with PMMA/silica and PMMA/silica-g-PMMA nanocomposites functionalized via ATRP
Wiebke S. Junior et al.
POLYMER (2014)
Joining of SiO2-BN ceramic to Nb using a CNT-reinforced brazing alloy
Jun Lei Qi et al.
RSC ADVANCES (2014)
Ultrafast lasers-reliable tools for advanced materials processing
Koji Sugioka et al.
LIGHT-SCIENCE & APPLICATIONS (2014)
Ultrastable bonding of glass with femtosecond laser bursts
Felix Zimmermann et al.
APPLIED OPTICS (2013)
Interfacial microstructure and strengthening mechanism of BN-doped metal brazed Ti/SiO2-BN joints
Z. W. Yang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2013)
Microstructure and mechanical properties of active brazed SiO2-BN ceramic modified by electron-beam evaporated Ti
Z. W. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Interlayer design to control interfacial microstructure and improve mechanical properties of active brazed Invar/SiO2-BN joint
Z. W. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Crack-free conditions in welding of glass by ultrashort laser pulse
Isamu Miyamoto et al.
OPTICS EXPRESS (2013)
Interfacial microstructure and mechanical property of SiO2-BN ceramics and Invar joint brazed with Ag-Cu-Ti active filler metal
Z. W. Yang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
BCB-to-oxide bonding technology for 3D integration
S. L. Lin et al.
MICROELECTRONICS RELIABILITY (2012)
Surface and interface characterization of oxygen plasma activated anodic bonding of glass-ceramics to stainless steel
Dehua Xiong et al.
MICROELECTRONICS RELIABILITY (2012)
Research Progress of SiO2 Matrix Composite Materials for Radomes
Xianxin Li et al.
FRONTIERS OF ADVANCED MATERIALS AND ENGINEERING TECHNOLOGY, PTS 1-3 (2012)
Interfacial microstructure and mechanical properties of joining electroless nickel plated quartz fibers reinforced silica composite to Invar
Zhao Lei et al.
MATERIALS & DESIGN (2011)
Interface evolution of SiO2 glass ceramic and Ti-6Al-4V alloy joint brazed with Ag-Cu-Ti alloy
D. Liu et al.
MATERIALS SCIENCE AND TECHNOLOGY (2011)
Si nanoadhesion layer for enhanced SiO2-SiN wafer bonding
Ryuichi Kondou et al.
SCRIPTA MATERIALIA (2011)
Sample preparation method for glass welding by ultrashort laser pulses yields higher seam strength
K. Cvecek et al.
APPLIED OPTICS (2011)
Effects of processing parameters on microstructure and mechanical behavior of SiO2/Ti-6Al-4V joint brazed with AgCu/Ni interlayer
J. C. Feng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Anodic bonding of glass-ceramics to stainless steel coated with intermediate SiO2 layer
Dehua Xiong et al.
MICROELECTRONIC ENGINEERING (2010)
Photochemical welding of silica microspheres to silicone rubber by ArF excimer laser
Masayuki Okoshi et al.
APPLIED SURFACE SCIENCE (2009)
Joining of engineering ceramics
J. A. Fernie et al.
INTERNATIONAL MATERIALS REVIEWS (2009)
Microstructure and fracture behavior of SiO2 glass ceramic and TC4 alloy joint brazed with TiZrNiCu alloy
Liu Duo et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2009)
Low-temperature, strong SiO2-SiO2 covalent wafer bonding for III-V compound semiconductors-to-silicon photonic integrated circuits
Di Liang et al.
JOURNAL OF ELECTRONIC MATERIALS (2008)
Field-assisted diffusion bonding and bond characterization of glass to aluminum
C. R. Liu et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Femtosecond laser modification of glass
D. M. Krol
JOURNAL OF NON-CRYSTALLINE SOLIDS (2008)
Vacuum brazing of SiO2 glass ceramic and Ti-6Al-4V alloy using AgCuTi filler foil
H. B. Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Interface microstructure and mechanical properties of the brazed SiO2 glass ceramic and 30Cr3 high-tensile steel joint
L. X. Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Modeling the formation of spontaneous wafer direct bonding under low temperature
Zirong Tang et al.
MICROELECTRONIC ENGINEERING (2008)
Silicon photonics
Bahrain Jalali et al.
JOURNAL OF LIGHTWAVE TECHNOLOGY (2006)
Welding of transparent materials using femtosecond laser pulses
T Tamaki et al.
JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS & EXPRESS LETTERS (2005)
Bonding properties of metals anodically bonded to glass
D Briand et al.
SENSORS AND ACTUATORS A-PHYSICAL (2004)
Microwave joining of 48% alumina-32% zirconia-20% silica ceramics
A Ahmed et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Finer features for functional microdevices - Micromachines can be created with higher resolution using two-photon absorption.
S Kawata et al.
NATURE (2001)
Multilayered interface in Ti/Macor® machinable glass-ceramic joints
A Guedes et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
分享论文
