期刊
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
卷 130, 期 -, 页码 124-135出版社
JOURNAL MATER SCI TECHNOL
DOI: 10.1016/j.jmst.2022.03.037
关键词
Deep geological disposal; Container material; Groundwater; Corrosion behavior; Electrochemical measurement
资金
- National Natural Science Foundation of China [U1867216, 52173304, 51701222]
This study comparatively investigated the corrosion behavior of NiCu low alloy steel and Q235 low carbon steel in the simulated Beishan groundwater. The results showed that the corrosion resistance of NiCu steel was higher than that of Q235 steel, and the long-term corrosion mass loss of NiCu steel was significantly lower than that of Q235 steel, confirming the beneficial effects of NiCu alloying on improving the corrosion resistance of steel.
The corrosion behavior of NiCu low alloy steel and Q235 low carbon steel as the candidate materials for geological disposal containers of high-level radioactive waste in the simulated Beishan groundwater was comparatively studied by weight loss test, electrochemical measurements, scanning electron microscope (SEM), electron probe microanalysis (EPMA), X-ray diffraction (XRD), Raman spectrum and X-ray photoelectron spectroscopy (XPS). The electrochemical results showed that the corrosion potential of NiCu steel and Q235 steel gradually increased with the immersion time. Simultaneously, the cathodic process transited from hydrogen evolution reaction (HER) control to the rust reduction control, while the anodic process was always dominated by the active dissolution of iron. By comparison, both the cathodic resistance and the anodic dissolution resistance of NiCu steel corrosion were apparently higher than that of Q235 steel. The results of rust layer characterization indicated that Ni and Cu elements could be enriched in the inner rust layer of NiCu steel and the rust layer was more compact. As the main corrosion products, the content of alpha-FeOOH in the rust layer of NiCu steel was obviously increased more than that of Q235 steel. Fe 6 (OH) 12 SO 4 stably existed in the corrosion products of NiCu steel because Ni(II) or Cu(II) could substitute Fe(II) of Fe 6 (OH) 12 SO 4 and increased its oxidation resistance. Moreover, Ni and Cu could also make Fe 3 O 4 ionic selective by doping. After the long-term immersion, the corrosion mass loss of NiCu steel was significantly lower than Q235 steel, which further confirmed the benefits of Ni and Cu alloying on improving the steel corrosion resistance. (c) 2022 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据