相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Influence of Finish Rolling Temperature and Molybdenum Addition on Strengthening of Low Carbon Niobium Steels-A Computational and Experimental Study
Arnab Chakraborty et al.
STEEL RESEARCH INTERNATIONAL (2021)
Carbide precipitation and coarsening kinetics in low carbon and low alloy steel during quenching and subsequently tempering
D. Ning et al.
MATERIALS CHARACTERIZATION (2021)
New Ms-formula for exact microstructural prediction of modern 3rd generation AHSS chemistries
Simone Kaar et al.
SCRIPTA MATERIALIA (2021)
Third generation of advanced high-strength steels: Processing routes and properties
Tarun Nanda et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS (2019)
ω-Fe particle size and distribution in high-nitrogen martensitic steels
D. H. Ping et al.
JOURNAL OF MATERIALS SCIENCE (2018)
TEM investigations on lath martensite substructure in quenched Fe-0.2C alloys
T. H. Man et al.
MATERIALS CHARACTERIZATION (2018)
Thermomechanical processing of advanced high strength steels
Jingwei Zhao et al.
PROGRESS IN MATERIALS SCIENCE (2018)
Lath formation mechanisms and twinning as lath martensite substructures in an ultra low-carbon iron alloy
D. H. Ping et al.
SCIENTIFIC REPORTS (2018)
Microstructural Evolution and Carbides in Quenched Ultra-low Carbon (Fe-C) Alloys
Dehai Ping et al.
ISIJ INTERNATIONAL (2017)
Microstructural control of FeCrAl alloys using Mo and Nb additions
Zhiqian Sun et al.
MATERIALS CHARACTERIZATION (2017)
Evaluating Strengthening and Impact Toughness Mechanisms for Ferritic and Bainitic Microstructures in Nb, Nb-Mo and Ti-Mo Microalloyed Steels
Gorka Larzabal et al.
METALS (2017)
Effect of substructure on mechanical properties and fracture behavior of lath martensite in 0.1C-1.1Si-1.7Mn steel
Shengci Li et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Effect of Prior Austenite Grain Size Refinement by Thermal Cycling on the Microstructural Features of As-Quenched Lath Martensite
Javier Hidalgo et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2016)
Twin structure of the lath martensite in low carbon steel
Pan Zhang et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Twin structure of the lath martensite in low carbon steel
Pan Zhang et al.
PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL (2016)
Structural characteristics of transition-iron-carbide precipitates formed during the first stage of tempering in 4340 steel
S. W. Thompson
MATERIALS CHARACTERIZATION (2015)
Microstructural heterogeneity and its relationship to the strength of martensite
G. Badinier et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Estimation of martensite feature size in a low-carbon alloy steel by microtexture analysis of boundaries
T. Karthikeyan et al.
MICRON (2015)
Experimental and computational study of cementite precipitation in tempered martensite
S. Zamberger et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2015)
Thermally activated growth of lath martensite in Fe-Cr-Ni-Al stainless steel
M. Villa et al.
MATERIALS SCIENCE AND TECHNOLOGY (2015)
The microstructure of lath martensite in quenched 9Ni steel
C. C. Kinney et al.
ACTA MATERIALIA (2014)
Kinetics of martensite formation in plain carbon steels: critical assessment of possible influence of austenite grain boundaries and autocatalysis
S. M. C. van Bohemen et al.
MATERIALS SCIENCE AND TECHNOLOGY (2014)
Effects of auto-tempering behaviour of martensite on mechanical properties of ultra high strength steel sheets
Hiroshi Matsuda et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2013)
In situ lift-out dedicated techniques using FIB-SEM system for TEM specimen preparation
Dacian Tomus et al.
MICRON (2013)
Quantitative analysis of variant selection in ausformed lath martensite
G. Miyamoto et al.
ACTA MATERIALIA (2012)
Effect of carbon content on variant pairing of martensite in Fe-C alloys
A. Stormvinter et al.
ACTA MATERIALIA (2012)
Effect of Prior Austenite Grain Size on the Morphology and Mechanical Properties of Martensite in Medium Carbon Steel
Y. Prawoto et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Microstructures and hardness of as-quenched martensites (0.1-0.5%C)
Bevis Hutchinson et al.
ACTA MATERIALIA (2011)
Crystallographic Analysis of Martensite in 0.2C-2.0Mn-1.5Si-0.6Cr Steel using EBSD
Pasi P. Suikkanen et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2011)
Relative effects of Mo and B on ferrite and bainite kinetics in strong steels
Sangeeta Khare et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2009)
Austenite grain size and the martensite-start temperature
Hong-Seok Yang et al.
SCRIPTA MATERIALIA (2009)
The role of molybdenum additions and prior deformation on acicular ferrite formation in microalloyed Nb-Ti low-carbon line-pipe steels
Zhenghua Tang et al.
MATERIALS CHARACTERIZATION (2008)
Effect of block size on the strength of lath martensite in low carbon steels
S. Morito et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Effect of nickel and molybdenum additions on weld metal toughness in a submerged arc welded HSLA line-pipe steel
SD Bhole et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Crystallographic features of lath martensite in low-carbon steel
H Kitahara et al.
ACTA MATERIALIA (2006)
The morphology and crystallography of lath martensite in Fe-C alloys
S Morito et al.
ACTA MATERIALIA (2003)
Modelling of phase transformation kinetics by correction of dilatometry results for a ferritic Nb-microalloyed steel
M Gomez et al.
ISIJ INTERNATIONAL (2003)
Ultragrain refinement of plain low carbon steel by cold-rolling and annealing of martensite
R Ueji et al.
ACTA MATERIALIA (2002)
分享论文
