相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Pore structure, porosity and compressive strength of highly porous reaction-bonded silicon nitride ceramics with various grain morphologies
Raheleh M. Nikonam et al.
JOURNAL OF MATERIALS SCIENCE (2020)
Ordinary state-based peridynamics for nonlinear hardening plastic materials' deformation and its fracture process
Zhimou Liu et al.
ENGINEERING FRACTURE MECHANICS (2020)
An adaptive thermo-mechanical peridynamic model for fracture analysis in ceramics
Soheil Bazazzadeh et al.
ENGINEERING FRACTURE MECHANICS (2020)
A general peridynamics model for multiphase transport of non-Newtonian compressible fluids in porous media
Amit Katiyar et al.
JOURNAL OF COMPUTATIONAL PHYSICS (2020)
3D printing boehmite gel foams into lightweight porous ceramics with hierarchical pore structure
Xiaoyan Zhang et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2020)
A mechanical-diffusive peridynamics coupling model for meso-scale simulation of chloride penetration in concrete under loadings
Wanjin Li et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
A semi-Lagrangian constitutive correspondence framework for peridynamics
Masoud Behzadinasab et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Mesoscale modeling of light transmission modulation in ceramics
Lukasz Kuna et al.
ACTA MATERIALIA (2020)
Contribution of steel fiber on the dynamic tensile properties of hybrid fiber ultra high toughness cementitious composites using Brazilian test
Xin Zhao et al.
CONSTRUCTION AND BUILDING MATERIALS (2020)
Axisymmetric peridynamic analysis of crack deflection in a single strand ceramic matrix composite
Cody Mitts et al.
ENGINEERING FRACTURE MECHANICS (2020)
Hydromechanical bond-based peridynamic model for pressurized and fluid-driven fracturing processes in fissured porous rocks
Xiao-Ping Zhou et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2020)
Statistical modelling of compressive strength controlled by porosity and pore size distribution for cementitious materials
Dongwei Hou et al.
CEMENT & CONCRETE COMPOSITES (2019)
A micromechanical investigation for the effects of pore size and its distribution on geopolymer foam concrete under uniaxial compression
Thang T. Nguyen et al.
ENGINEERING FRACTURE MECHANICS (2019)
A peridynamic model for brittle damage and fracture in porous materials
Ziguang Chen et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2019)
Effects of pore-crack relative location on crack propagation in porous media using XFEM method
Mohammad Rezanezhad et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2019)
Upscaling the elastic stiffness of foam concrete as a three-phase composite material
M. Ben Youssef et al.
CEMENT AND CONCRETE RESEARCH (2018)
Experimental investigation on the compressive strength of foamed concrete: Effect of curing conditions, cement type, foaming agent and dry density
Devid Falliano et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Finite element analysis of fracture statistics of ceramics: Effects of grain size and pore size distributions
Shingo Ozaki et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2018)
3D meso-scale modelling of foamed concrete based on X-ray Computed Tomography
Tuan Nguyen et al.
CONSTRUCTION AND BUILDING MATERIALS (2018)
Effect of nanoscale phase separation on the fracture behavior of glasses: Toward tough, yet transparent glasses
Longwen Tang et al.
PHYSICAL REVIEW MATERIALS (2018)
A peridynamics formulation for quasi-static fracture and contact in rock
Timon Rabczuk et al.
ENGINEERING GEOLOGY (2017)
Characterization and comparison of capillary pore structures of digital cement pastes
H. Dong et al.
MATERIALS AND STRUCTURES (2017)
Pore Characteristics and Their Effects on the Material Properties of Foamed Concrete Evaluated Using Micro-CT Images and Numerical Approaches
Sang-Yeop Chung et al.
APPLIED SCIENCES-BASEL (2017)
Experimental and numerical investigation of influence of air-voids on the compressive behaviour of foamed concrete
Thang T. Nguyen et al.
MATERIALS & DESIGN (2017)
Experimental study on use of lightweight foam concrete as subgrade bed filler of ballastless track
Jun-jie Huang et al.
CONSTRUCTION AND BUILDING MATERIALS (2017)
Mesoscale Fracture Analysis of Multiphase Cementitious Composites Using Peridynamics
Amin Yaghoobi et al.
MATERIALS (2017)
Structural behavior of axially loaded precast foamed concrete sandwich panels
Y. H. Mugahed Amran et al.
CONSTRUCTION AND BUILDING MATERIALS (2016)
Computational technology for analysis of 3D meso-structure effects on damage and failure of concrete
Xiaofeng Wang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2016)
Parameter sensitivity analysis of indirect evaporative cooler (IEC) with condensation from primary air
Yi Chen et al.
CUE 2015 - APPLIED ENERGY SYMPOSIUM AND SUMMIT 2015: LOW CARBON CITIES AND URBAN ENERGY SYSTEMS (2016)
Cracking in autoclaved aerated concrete: Experimental investigation and XFEM modeling
D. Ferretti et al.
CEMENT AND CONCRETE RESEARCH (2015)
Experimental chemo-mechanics of early-age fracture properties of cement paste
Christian G. Hoover et al.
CEMENT AND CONCRETE RESEARCH (2015)
A thermodynamically consistent nonlocal damage model for concrete materials with unilateral effects
Wei He et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)
Properties and applications of foamed concrete; a review
Y. H. Mugahed Amran et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
On void structure and strength of foamed concrete made without/with additives
Ameer A. Hilal et al.
CONSTRUCTION AND BUILDING MATERIALS (2015)
3D meso-scale fracture modelling and validation of concrete based on in-situ X-ray Computed Tomography images using damage plasticity model
Yujie Huang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2015)
Fracture toughness of calcium-silicate-hydrate from molecular dynamics simulations
M. Bauchy et al.
JOURNAL OF NON-CRYSTALLINE SOLIDS (2015)
Microstructure-informed modelling of damage evolution in cement paste
Mingzhong Zhang et al.
CONSTRUCTION AND BUILDING MATERIALS (2014)
Sensitivity Analysis of Tool Axis Errors in Large Mill-turn Machine Tools
Panpan Sun et al.
MECHANICAL STRUCTURES AND SMART MATERIALS (2014)
Microcrack-based coupled damage and flow modeling of fracturing evolution in permeable brittle rocks
Y. L. Lu et al.
COMPUTERS AND GEOTECHNICS (2013)
Characterization and simulation of microstructure and thermal properties of foamed concrete
She Wei et al.
CONSTRUCTION AND BUILDING MATERIALS (2013)
Influence of damage on pore size distribution and permeability of rocks
Chloe Arson et al.
INTERNATIONAL JOURNAL FOR NUMERICAL AND ANALYTICAL METHODS IN GEOMECHANICS (2013)
Mechanical properties of foamed concrete exposed to high temperatures
Md Azree Othuman Mydin et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Predicting crack propagation with peridynamics: a comparative study
Abigail Agwai et al.
INTERNATIONAL JOURNAL OF FRACTURE (2011)
Discrete element analysis of the effect of pore size and pore distribution on the mechanical behavior of rock
A. Fakhimi et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2011)
Peridynamic theory for progressive damage prediction in center-cracked composite laminates
B. Kilic et al.
COMPOSITE STRUCTURES (2009)
Stochastic damage model for concrete based on energy equivalent strain
Jie Li et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2009)
Peridynamic states and constitutive modeling
S. A. Silling et al.
JOURNAL OF ELASTICITY (2007)
Air-void characterisation of foam concrete
E. K. Kunhanandan Nambiar et al.
CEMENT AND CONCRETE RESEARCH (2007)
Modelling of cohesive crack growth in concrete structures with the extended finite element method
Joerg F. Unger et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2007)
An energy release rate-based plastic-damage model for concrete
JY Wu et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2006)
Mesoscale analysis of dynamic fragmentation of ceramics under tension
S Maiti et al.
ACTA MATERIALIA (2005)
The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling
G Constantinides et al.
CEMENT AND CONCRETE RESEARCH (2004)
A method for assessment of the freeze-thaw resistance of preformed foam cellular concrete
PJ Tikalsky et al.
CEMENT AND CONCRETE RESEARCH (2004)
Modeling of porous ceramics response to compressive loading
T Sadowski et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2003)
Uniaxial tension test for the determination of fracture parameters of concrete: state of the art
JGM van Mier et al.
ENGINEERING FRACTURE MECHANICS (2002)
The effect of high fly ash content on the compressive strength of foamed concrete
EP Kearsley et al.
CEMENT AND CONCRETE RESEARCH (2001)
Reformulation of elasticity theory for discontinuities and long-range forces
SA Silling
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2000)
分享论文
