相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effects of cooling after rolling and heat treatment on microstructures and mechanical properties of Mo-Ti microalloyed medium carbon steel
Defa Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Improvement of strength, toughness and ductility in ultrafine-grained low-carbon steel processed by warm bi-axial rolling
Tadanobu Inoue et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effects of the precipitation of secondary phases on the erosion-corrosion of 25% Cr duplex stainless steel
Young-Jae Kim et al.
CORROSION SCIENCE (2019)
Effect of prior plastic deformation and deformation rate on the corrosion resistance of AISI 321 austenitic stainless steel
A. A. Tiamiyu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
On the determination of forming limits in thin-walled tubes
J. P. Magrinho et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2019)
Strain-based approach to investigate intergranular stress corrosion crack initiation on a smooth surface of austenitic stainless steel
Tomoyuki Fujii et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of solution treatment on cavitation erosion behavior of high-nitrogen austenitic stainless steel
Yanxin Qiao et al.
WEAR (2019)
Interaction between pitting corrosion and critical flow velocity for erosion-corrosion of 304 stainless steel under jet slurry impingement
L. L. Li et al.
CORROSION SCIENCE (2019)
The importance of toughness in manufacturing
Tony Atkins
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)
Coarsening of nanoscale (Ti,Mo)C precipitates in different ferritic matrixes
Lei Cheng et al.
MATERIALS CHARACTERIZATION (2018)
Improvement of the anti-corrosion property of twinning-induced plasticity steel by twin-induced grain boundary engineering
Kun Wang et al.
MATERIALS LETTERS (2018)
The sequential twinning-transformation induced plasticity effects in a thermomechanically processed high Mn austenitic steel
H. Eskandari Sabzi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Strain hardening and nanocrystallization behaviors in Hadfield steel subjected to surface severe plastic deformation
Chen Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Analysis of mechanical and chemical mechanisms on cavitation erosioncorrosion of steels in salt water using electrochemical methods
Tobias Amann et al.
TRIBOLOGY INTERNATIONAL (2018)
Surface and sub-surface damage of 0.20 wt% C-martensite during three-body abrasion
S. Das Bakshi et al.
WEAR (2018)
A comparative study on the three-body abrasive wear performance of Q&P processing and low-temperature bainitic transformation for a medium-carbon dual-phase steel
H. Y. Dong et al.
WEAR (2018)
Influences of local laser quenching on wear performance of D1 wheel steel
Yuda Chen et al.
WEAR (2018)
Simultaneously improved mechanical properties and corrosion resistance of Mg-Li-Al alloy produced by severe plastic deformation
Takahiro Mineta et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Erosion corrosion of low-alloy wear-resistant steels in alkaline slurry
Feng-ming Song et al.
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2017)
Corrosion fatigue crack initiation and initial propagation mechanism of E690 steel in simulated seawater
Tianliang Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Erosion-enhanced corrosion of stainless steel and carbon steel measured electrochemically under liquid and slurry impingement
Z. B. Zheng et al.
CORROSION SCIENCE (2016)
The effect of subzero treatment on microstructure, fracture toughness, and wear resistance of Vanadis 6 tool steel
Jana Sobotova et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Correlating the abrasion resistance of low alloy steels to the standard mechanical properties: A statistical analysis over a larger data set
Xiaojun Xu et al.
WEAR (2016)
Evolution of (Ti, Mo)C particles in austenite of a Ti-Mo-bearing steel
Zhenqiang Wang et al.
MATERIALS & DESIGN (2016)
A review of dynamic recrystallization phenomena in metallic materials
K. Huang et al.
MATERIALS & DESIGN (2016)
A statistical study on the effect of annealing temperature on pitting corrosion resistance of 2205 duplex stainless steel
M. Gholami et al.
CORROSION SCIENCE (2015)
Effect of microalloying with molybdenum and boron on the microstructure and mechanical properties of ultra-low-C Ti bearing steel
Jun Hu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Thermomechanical processing of low carbon Nb-Ti stabilized microalloyed steel: Microstructure and mechanical properties
Sumit Ghosh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Developing alternative coatings for repair and restoration of pumps for caustic liquor transportation in the aluminum and nickel industry
C. R. C. Lima et al.
SURFACE & COATINGS TECHNOLOGY (2015)
Sliding wear behavior of austernpered ductile iron microalloyed with boron
A. Bedolla-Jacuinde et al.
WEAR (2015)
Erosion-corrosion at different locations of X65 carbon steel elbow
L. Zeng et al.
CORROSION SCIENCE (2014)
Effect of residual stress induced by pulsed-laser irradiation on initiation of chloride stress corrosion cracking in stainless steel
Shuzo Eto et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Wear of nano-structured carbide-free bainitic steels under dry rolling-sliding conditions
A. Leiro et al.
WEAR (2013)
Erosion enhanced corrosion and corrosion enhanced erosion of API X-70 pipeline steel
Md. Aminul Islam et al.
WEAR (2013)
On the comparison of microstructural characteristics and mechanical properties of high-vanadium austenitic manganese steels with the Hadfield steel
E. G. Moghaddam et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Erosion-enhanced corrosion of carbon steel at passive state
B. T. Lu et al.
CORROSION SCIENCE (2011)
Dislocation structure evolution and its effects on cyclic deformation response of AISI 316L stainless steel
M. S. Pham et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Nanocrystallization and α martensite formation in the surface layer of medium-manganese austenitic wear-resistant steel caused by shot peening
T. S. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Erosion-corrosion and surface protection of A356 Al/ZrO2 composites produced by vortex and squeeze casting
M. T. Abou El-Khair et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Improving the erosion-corrosion resistance of AISI 316 austenitic stainless steel by low-temperature plasma surface alloying with N and C
H. Dong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Correlation of microstructure with hardness and wear resistance of stainless steel blend coatings fabricated by atmospheric plasma spraying
Eun Pil Song et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Influence of microstructure and experimental parameters on the erosion-corrosion behavior of Al alloy composites
Y. L. Saraswathi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Synergism of electrochemical and mechanical factors in erosion-corrosion
BT Lu et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2006)
Erosion and erosion-corrosion performance of cast and thermally sprayed nickel-aluminium bronze
RC Barik et al.
WEAR (2005)
Improvement of the work hardening rate of ultrafine grained steels through second phase particles
R Song et al.
SCRIPTA MATERIALIA (2005)
Nominal particle size of multi-sized particulate slurries for evaluation of erosion wear and effect of fine particles
BK Gandhi et al.
WEAR (2004)
Instabilities and ductility of nanocrystalline and ultrafine-grained metals
E Ma
SCRIPTA MATERIALIA (2003)
Erosion- and wear-corrosion behavior of Fe-Mn-Al alloys in NaCl solution
HH Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)
Synergistic effect of cavitation erosion and corrosion of various engineering alloys in 3.5% NaCl solution
CT Kwok et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)