4.6 Article

Encapsulation of coffee silverskin extracts by foam mat drying and comparison with powders obtained by spray drying and freeze-drying

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Engineering, Chemical

Optimization of process parameters for foam mat drying of black rice bran anthocyanin and comparison with spray- and freeze-dried powders

Nattapong Kanha et al.

Summary: The foaming conditions for producing instant powder from black rice bran anthocyanin extracts were optimized using response surface methodology (RSM). The foam with the highest overrun, foam density, and foam stability was obtained with a foaming agent concentration of 0.06% (w/w) and a whipping time of 16.1 min. The foam was then dried at different temperatures, with the best results observed at 80 degrees C. The foam mat-dried powders showed comparable or higher total anthocyanin content and encapsulation efficiency compared to spray- and freeze-dried powders, but had lower solubility and dispersibility.

DRYING TECHNOLOGY (2022)

Article Engineering, Chemical

Valorization of spent coffee grounds: Encapsulation of bioactive compounds by different drying methods

Cintia da Silva Araujo et al.

Summary: This study investigates different drying methods for the microencapsulation of bioactive compounds extracted from espresso spent coffee. The dried products were characterized and compared, and the effects of different drying methods on the properties of the dried products were evaluated. The results show that all drying methods can produce dried products with good physicochemical properties and high levels of phenolic and antioxidant compounds.

DRYING TECHNOLOGY (2022)

Article Engineering, Chemical

Optimization of foam mat drying for instant coffee processing and its effect on drying kinetics and quality characteristics

Katia Silva Maciel et al.

Summary: The study found that higher concentrations of whey protein in cappuccinos lead to shorter drying times and increased stability of the foam, as well as higher retention of bioactive components, lower moisture content, and higher wettability in the powder. The combination of 1.32% maltodextrin and 2.64% whey protein isolate achieved the highest overall desirability rating of 0.6503.

DRYING TECHNOLOGY (2022)

Article Chemistry, Applied

Effect of gum Arabic concentrations on foam properties, drying kinetics and physicochemical properties of foam mat drying of cantaloupe

Tan Suet Li et al.

Summary: The study showed that foam mat drying of cantaloupe puree with 10% GA had better foam density, expansion, and stability, making it suitable for food processing. The Page model accurately described the drying behavior of cantaloupe foam with different GA concentrations at a constant temperature. The moisture content of foam mat dried cantaloupe powder varied within a certain range.

FOOD HYDROCOLLOIDS (2021)

Article Food Science & Technology

Process optimization and ethanol use for obtaining white and red dragon fruit powder by foam mat drying

Leandro Levate Macedo et al.

Summary: This study investigated the production of white and red dragon fruit powder using foam mat drying, optimizing the use of foam agents and stirring time. Ethanol and air temperature were evaluated for their effects on drying kinetics, effective moisture diffusivity, and drying rate. The study identified optimal conditions for foam production and drying, with ethanol pretreatment and higher temperatures leading to the most efficient drying process.

JOURNAL OF FOOD SCIENCE (2021)

Article Energy & Fuels

Encapsulation of red sorghum extract rich in proanthocyanidins: Process formulation and mechanistic model of foam-mat drying at various temperature

Devi Yuni Susanti et al.

Summary: The study focused on determining the WPI percentage for creating the best foam microstructure to accelerate drying and developing a mechanistic model to describe the drying phenomena.

CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2021)

Review Food Science & Technology

Microstructures of encapsulates and their relations with encapsulation efficiency and controlled release of bioactive constituents: A review

Pheakdey Yun et al.

Summary: Encapsulation methods are used to protect heat-sensitive health beneficial constituents, with different microstructures influencing encapsulation efficiency and retention of core materials. Compact microstructures formed under suitable conditions result in higher encapsulation efficiencies and better retention capabilities.

COMPREHENSIVE REVIEWS IN FOOD SCIENCE AND FOOD SAFETY (2021)

Article Food Science & Technology

Convective Drying with Ethanol Pre-treatment of Strawberry Enriched with Isomaltulose

Leandro Levate Macedo et al.

Summary: The study investigated the effects of different treatments on the convective drying of strawberries, revealing that ethanol pre-treatment can reduce drying time and preserve antioxidant properties but may increase sample shrinkage. On the other hand, the enrichment with isomaltulose and pulsed vacuum osmotic dehydration processes can reduce sample shrinkage and hygroscopicity.

FOOD AND BIOPROCESS TECHNOLOGY (2021)

Article Materials Science, Composites

Coffee Silverskin as a Multifunctional Waste Filler for High-Density Polyethylene Green Composites

Aleksander Hejna et al.

Summary: This study aimed to investigate the effects of coffee silverskin as a lignocellulosic waste filler in developing high-density polyethylene (HDPE) composites. The filler demonstrated reinforcing effects on the HDPE matrix and significantly improved the thermooxidative resistance of the composites. Additionally, the addition of silverskin changed the properties of polyethylene even at low concentrations, showing potential benefits for wood polymer composites and natural fiber composites development.

JOURNAL OF COMPOSITES SCIENCE (2021)

Article Engineering, Chemical

Foam mat drying of papaya using microwaves: Machine learning modeling

Ovais S. Qadri et al.

JOURNAL OF FOOD PROCESS ENGINEERING (2020)

Article Food Science & Technology

Physicochemical, rheological, microbiological and sensory properties of newly developed coffee flavored kefir

Wallaf Costa Vimercati et al.

LWT-FOOD SCIENCE AND TECHNOLOGY (2020)

Article Horticulture

Optimization of Process Parameters for Foam-Mat Drying of Peaches

Arshdeep Singh Brar et al.

INTERNATIONAL JOURNAL OF FRUIT SCIENCE (2020)

Article Food Science & Technology

Optimization of the foam mat drying process for production of cocoa powder enriched with peppermint extract

Maja Benkovic et al.

LWT-FOOD SCIENCE AND TECHNOLOGY (2019)

Article Agriculture, Multidisciplinary

Comparison of blueberry powder produced via foam-mat freeze-drying versus spray-drying: evaluation of foam and powder properties

Sandi Darniadi et al.

JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE (2018)

Article Food Science & Technology

Microencapsulation by spray drying of a lycopene-rich tomato concentrate: Characterization and stability

Andre L. R. Souza et al.

LWT-FOOD SCIENCE AND TECHNOLOGY (2018)

Article Environmental Sciences

Coffea canephora silverskin from different geographical origins: A comparative study

Silvia M. F. Bessada et al.

SCIENCE OF THE TOTAL ENVIRONMENT (2018)

Article Engineering, Chemical

Encapsulation of carotenoid extracts from pequi (Caryocar brasiliense Camb) by emulsification (O/W) and foam-mat drying

Marcos Roberto Moacir Ribeiro Pinto et al.

POWDER TECHNOLOGY (2018)

Review Food Science & Technology

Foam-mat drying technology: A review

Z. Hardy et al.

CRITICAL REVIEWS IN FOOD SCIENCE AND NUTRITION (2017)

Article Food Science & Technology

Effects of foam mat drying on physicochemical and microstructural properties of yacon juice powder

Talita Szlapak Franco et al.

LWT-FOOD SCIENCE AND TECHNOLOGY (2016)

Article Food Science & Technology

Insights on the health benefits of the bioactive compounds of coffee silverskin extract

Beatriz Fernandez-Gomez et al.

JOURNAL OF FUNCTIONAL FOODS (2016)

Article Food Science & Technology

Egg albumin-folic acid nanocomplexes: Performance as a functional ingredient and biological activity

Carolina Arzeni et al.

JOURNAL OF FUNCTIONAL FOODS (2015)

Review Food Science & Technology

FOAM MAT DRYING OF FOOD MATERIALS: A REVIEW

A. Sangamithra et al.

JOURNAL OF FOOD PROCESSING AND PRESERVATION (2015)

Article Food Science & Technology

Selection of the Solvent and Extraction Conditions for Maximum Recovery of Antioxidant Phenolic Compounds from Coffee Silverskin

Lina F. Ballesteros et al.

FOOD AND BIOPROCESS TECHNOLOGY (2014)

Article Agricultural Engineering

Optimization of antioxidants extraction from coffee silverskin, a roasting by-product, having in view a sustainable process

Anabela S. G. Costa et al.

INDUSTRIAL CROPS AND PRODUCTS (2014)

Review Food Science & Technology

Colour Measurement and Analysis in Fresh and Processed Foods: A Review

Pankaj B. Pathare et al.

FOOD AND BIOPROCESS TECHNOLOGY (2013)

Article Engineering, Chemical

DEGRADATION KINETICS AND COLOR STABILITY OF SPRAY-DRIED ENCAPSULATED ANTHOCYANINS FROM HIBISCUS SABDARIFFA L.

Zuhaili Idham et al.

JOURNAL OF FOOD PROCESS ENGINEERING (2012)

Review Food Science & Technology

Production, Composition, and Application of Coffee and Its Industrial Residues

Solange I. Mussatto et al.

FOOD AND BIOPROCESS TECHNOLOGY (2011)

Article Engineering, Chemical

Wetting, disintegration and dissolution of agglomerated water soluble powders

L. Forny et al.

POWDER TECHNOLOGY (2011)

Article Engineering, Chemical

Production of instant soymilk powders by ultrafiltration, spray drying and fluidized bed agglomeration

Nakarin Jinapong et al.

JOURNAL OF FOOD ENGINEERING (2008)