相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Novel approaches based on ultrasound for spray drying of food and bioactive compounds
Rajeshree A. Khaire et al.
DRYING TECHNOLOGY (2021)
Quality Assessment of Honey Powders Obtained by High- and Low-Temperature Spray Drying
Aleksandra Jedlinska et al.
APPLIED SCIENCES-BASEL (2021)
Impact of vacuum spray drying on encapsulation of fish oil: Oxidative stability and encapsulation efficiency
Fernanda de Melo Ramos et al.
FOOD RESEARCH INTERNATIONAL (2021)
Uniform lactose microspheres with high crystallinity fabricated by micro-fluidic spray drying technology combined with post-treatment process
Tiantian Jiang et al.
POWDER TECHNOLOGY (2021)
Nano spray drying of food ingredients; materials, processing and applications
Seid Mahdi Jafari et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2021)
Effect of spray drying on the polyphenolic compounds present in purple sweet potato roots: Identification of new cinnamoylquinic acids
Susana Chamorro et al.
FOOD CHEMISTRY (2021)
Integrating a model predictive control into a spray dryer simulator for a closed-loop control strategy
Sadegh Poozesh et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)
Dehumidified-Air-Assisted Spray Drying of Buckwheat Honey with Maltodextrin and Skim Milk Powder as Carriers
Alicja Baranska et al.
APPLIED SCIENCES-BASEL (2021)
Spray drying for the retention of food bioactive compounds and nutraceuticals-150th anniversary of spray drying
Seid Mahdi Jafari et al.
DRYING TECHNOLOGY (2021)
Approaches for improving the flowability of high-protein dairy powders post spray drying-A review
R. Hazlett et al.
POWDER TECHNOLOGY (2021)
Microencapsulation of Curcumin in Crosslinked Jelly Fig Pectin Using Vacuum Spray Drying Technique for Effective Drug Delivery
Nina Hartini et al.
POLYMERS (2021)
Dehumidified Air-Assisted Spray-Drying of Cloudy Beetroot Juice at Low Temperature
Aleksandra Jedlinska et al.
APPLIED SCIENCES-BASEL (2021)
Development of carrier material for food applications in spray drying technology: An overview
Mohammad Danial Azhar et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Microencapsulation in foam spray drying
Artur Lewandowski et al.
DRYING TECHNOLOGY (2020)
Design study of printer nozzle spray dryer by computational fluid dynamics modeling
Maciej Jaskulski et al.
DRYING TECHNOLOGY (2020)
New perspectives on capturing particle agglomerates in CFD modeling of spray dryers
Hasan Jubaer et al.
DRYING TECHNOLOGY (2020)
Reformulation of spray-dried apple concentrate and honey for the enhancement of drying process performance and the physicochemical properties of powders
Katarzyna Samborska et al.
JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE (2020)
Computational Fluid Dynamics (CFD) Simulations of Spray Drying: Linking Drying Parameters with Experimental Aerosolization Performance
P. Worth Longest et al.
PHARMACEUTICAL RESEARCH (2020)
The development and application of sticky-point models to spray drying processes for the manufacturing of nutritional powder products and infant formulas
F. J. Camino-Sanchez et al.
JOURNAL OF FOOD ENGINEERING (2020)
Interrogation of a new inline multi-bin cyclone for sorting of produced powders of a lab-scale spray dryer
Sadegh Poozesh et al.
POWDER TECHNOLOGY (2020)
Spray Drying for the Encapsulation of Oils-A Review
Nameer Khairullah Mohammed et al.
MOLECULES (2020)
Nanoparticle formation by nanospray drying & its application in nanoencapsulation of food bioactive ingredients
Santosh Chopde et al.
JOURNAL OF AGRICULTURE AND FOOD RESEARCH (2020)
Atomisation technologies used in spray drying in the dairy industry: A review
Jonathan J. O'Sullivan et al.
JOURNAL OF FOOD ENGINEERING (2019)
The application of dehumidified air in rapeseed and honeydew honey spray drying - Process performance and powders properties considerations
Aleksandra Jedlinska et al.
JOURNAL OF FOOD ENGINEERING (2019)
Identification of regions in a spray dryer susceptible to forced agglomeration by CFD simulations
Hasan Jubaer et al.
POWDER TECHNOLOGY (2019)
Enhancing the recovery of whey proteins based on application of ultrasound in ultrafiltration and spray drying
Tejaswini Prabhuzantye et al.
ULTRASONICS SONOCHEMISTRY (2019)
The Effect of Low-Temperature Spray Drying with Dehumidified Air on Phenolic Compounds, Antioxidant Activity, and Aroma Compounds of Rapeseed Honey Powders
Katarzyna Samborska et al.
FOOD AND BIOPROCESS TECHNOLOGY (2019)
Development and characterization of physical properties of honey-rich powder
Katarzyna Samborska et al.
FOOD AND BIOPRODUCTS PROCESSING (2019)
Scale-up of pharmaceutical spray drying using scale-up rules: A review
Sadegh Poozesh et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2019)
Are traditional small-scale screening methods reliable to predict pharmaceutical spray drying?
Sadegh Poozesh et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2019)
Mapping energy consumption in food manufacturing
Alia Ladha-Sabur et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2019)
Drying of Maltodextrin solution in a vacuum spray dryer
Fernanda de Melo Ramos et al.
CHEMICAL ENGINEERING RESEARCH & DESIGN (2019)
Effects of Vacuum Freeze-Drying and Vacuum Spray-Drying on Biochemical Properties and Functionalities of Myofibrillar Proteins from Silver Carp
Jianzhen Niu et al.
JOURNAL OF FOOD QUALITY (2019)
Advances in Computational Fluid Mechanics in Cellular Flow Manipulation: A Review
Masoud Arabghahestani et al.
APPLIED SCIENCES-BASEL (2019)
Assessing the Vacuum Spray Drying Effects on the Properties of Orange Essential Oil Microparticles
Fernanda de Melo Ramos et al.
FOOD AND BIOPROCESS TECHNOLOGY (2019)
Spray drying from yesterday to tomorrow: An industrial perspective
Rainer Bellinghausen
DRYING TECHNOLOGY (2019)
Effect of foam spray drying process parameters on powder morphology
Artur Lewandowski et al.
DRYING TECHNOLOGY (2019)
CFD analysis of the dispersed phase behavior for micropowders production via spray drying and ultrasonic atomization
Natalia N. Menshutina et al.
DRYING TECHNOLOGY (2019)
Advances in Spray-Drying Encapsulation of Food Bioactive Ingredients: From Microcapsules to Nanocapsules
Elham Assadpour et al.
ANNUAL REVIEW OF FOOD SCIENCE AND TECHNOLOGY, VOL 10 (2019)
Computational Fluid Dynamics in Drying Process Modelling-a Technical Review
Rani Puthukulangara Ramachandran et al.
FOOD AND BIOPROCESS TECHNOLOGY (2018)
CFD simulations of droplet and particle agglomeration in an industrial counter-current spray dryer
M. Jaskulski et al.
ADVANCED POWDER TECHNOLOGY (2018)
Continuous roll-to-roll coating of cellulose nanocrystals onto paperboard
Rajesh Koppolu et al.
CELLULOSE (2018)
Prolonged drug release properties for orodispersible films by combining hot-melt extrusion and solvent casting methods
Isabell Speer et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2018)
On the particle formation in spray drying process for bio-pharmaceutical applications: Interrogating a new model via computational fluid dynamics
Sadegh Poozesh et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2018)
Nano spray drying for encapsulation of pharmaceuticals
Cordin Arpagaus et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Interdependence of particle properties and bulk powder behavior of indomethacin in quench-cooled molten two-phase solid dispersions
Kristian Semjonov et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Comparative evaluation of powder flow parameters with reference to particle size and shape
Hui Ping Goh et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Simulation of food drying processes by Computational Fluid Dynamics (CFD); recent advances and approaches
Narjes Malekjani et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2018)
Microfluidic cell sorting by stiffness to examine heterogenic responses of cancer cells to chemotherapy
Muhymin Islam et al.
CELL DEATH & DISEASE (2018)
Development of Hot Melt Extruded Solid Dispersion of Tamoxifen Citrate and Resveratrol for Synergistic Effects on Breast Cancer Cells
Nusrat Chowdhury et al.
AAPS PHARMSCITECH (2018)
Model development and prediction of particle size distribution, density and friability of a comilling operation in a continuous pharmaceutical manufacturing process
Nirupaplava Metta et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2018)
Fabrication of Hierarchical Polymeric Thin Films by Spin Coating Toward Production of Amorphous Solid Dispersion for Buccal Drug Delivery System: Preparation, Characterization, and In Vitro Release Investigations
Esra'a Albarahmieh et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2018)
Effects of skim milk concentrate dry matter and spray drying air temperature on formation of capsules with varying particle size and the survival microbial cultures in a microcapsule matrix
Rebecca Wuerth et al.
DRYING TECHNOLOGY (2018)
Flame spray drying: Droplet and particle flow dynamics
M. Sobulska et al.
DRYING TECHNOLOGY (2017)
Effect of plasticizers on the physico-mechanical properties of pullulan based pharmaceutical oral films
Parameswara Rao Vuddanda et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2017)
Effects of micro wet milling and vacuum spray drying on the physicochemical and antioxidant properties of orange (Citrus unshiu) juice with pulp powder
M. Z. Islam et al.
FOOD AND BIOPRODUCTS PROCESSING (2017)
Enhancement of UVC-light treatment of tangerine and grapefruit juices through ultrasonic atomization
Oscar Antonio-Gutierrez et al.
INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2017)
Understanding the process-product-performance interplay of spray dried drug-polymer systems through complete structural and chemical characterization of single spray dried particles
Sadegh Poozesh et al.
POWDER TECHNOLOGY (2017)
An approach to turn olive mill wastewater into a valuable food by-product based on spray drying in dehumidified air using drying aids
Athanasios N. Chasekioglou et al.
POWDER TECHNOLOGY (2017)
High-throughput, low-loss, low-cost, and label-free cell separation using electrophysiology-activated cell enrichment
Shabnam A. Faraghat et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2017)
Trends of spray drying: A critical review on drying of fruit and vegetable juices
Mohammad Rezaul Islam Shishir et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2017)
Spray drying of probiotics and other food-grade bacteria: A review
Song Huang et al.
TRENDS IN FOOD SCIENCE & TECHNOLOGY (2017)
Predictive CFD modeling of whey protein denaturation in skim milk spray drying powder production
M. Jaskulski et al.
ADVANCED POWDER TECHNOLOGY (2017)
Production of fine lactose particles from organic solvent in laboratory and commercial-scale spray dryers
I. C. Kemp et al.
DRYING TECHNOLOGY (2016)
Modeling spray drying of dairy products - Impact of drying kinetics, reaction kinetics and spray drying conditions on lysine loss
Iris Schmitz-Schug et al.
CHEMICAL ENGINEERING SCIENCE (2016)
Assessment of differences between products obtained in conventional and vacuum spray dryer
Fernanda de Melo Ramos et al.
FOOD SCIENCE AND TECHNOLOGY (2016)
Microencapsulation of Nigella sativa oleoresin by spray drying for food and nutraceutical applications
Amr E. Edris et al.
FOOD CHEMISTRY (2016)
Influence of an ultrasonic nozzle in spray-drying and storage on the properties of blueberry powder and microcapsules
Feyza Tatar Turan et al.
JOURNAL OF THE SCIENCE OF FOOD AND AGRICULTURE (2016)
Nanoscale Infrared, Thermal, and Mechanical Characterization of Telaprevir-Polymer Miscibility in Amorphous Solid Dispersions Prepared by Solvent Evaporation
Na Li et al.
MOLECULAR PHARMACEUTICS (2016)
A state-of-the-art review of pulse combustion: Principles, modeling, applications and R&D issues
Xiangmei Meng et al.
RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)
Assessment of differences between products obtained in conventional and vacuum spray dryer
Fernanda de Melo Ramos et al.
FOOD SCIENCE AND TECHNOLOGY (2016)
Effect of gum arabic concentration and inlet temperature during spray drying on physical and antioxidant properties of honey powder
Yogita Suhag et al.
JOURNAL OF FOOD MEASUREMENT AND CHARACTERIZATION (2016)
Evaluation of ultrasonic nozzle with spray-drying as a novel method for the microencapsulation of blueberry's bioactive compounds
Feyza Tatar Turan et al.
INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2015)
Effects of icosapent ethyl on lipoprotein particle concentration and size in statin-treated patients with persistent high triglycerides (the ANCHOR Study)
Christie M. Ballantyne et al.
JOURNAL OF CLINICAL LIPIDOLOGY (2015)
On the Use of tert-Butanol/ Water Cosolvent Systems in Production and Freeze-Drying of Poly-epsilon-Caprolactone Nanoparticles
Tereza Zelenkova et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2015)
Miscibility of Itraconazole-Hydroxypropyl Methylcellulose Blends: Insights with High Resolution Analytical Methodologies
Hitesh S. Purohit et al.
MOLECULAR PHARMACEUTICS (2015)
Evaluation of nano spray drying as a method for drying and formulation of therapeutic peptides and proteins
Yusuf A. Haggag et al.
FRONTIERS IN PHARMACOLOGY (2015)
Energy Consumption and Product Quality Interactions in Flame Spray Drying
M. Piatkowski et al.
DRYING TECHNOLOGY (2015)
Pulse Combustion Spray Drying of Egg White: Energy Efficiency and Product Quality
Zhonghua Wu et al.
FOOD AND BIOPROCESS TECHNOLOGY (2015)
Ultrasonic spray drying vs high vacuum and microwaves technology for blueberries
N. Candia-Munoz et al.
Proceedings of the 2015 ICU International Congress on Ultrasonics (2015)
Spray-Drying Microencapsulation of Anthocyanins by Natural Biopolymers: A Review
Sahar Akhavan Mahdavi et al.
DRYING TECHNOLOGY (2014)
Nanospray technology for an in situ gelling nanoparticulate powder as a wound dressing
Felicetta De Cicco et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2014)
Continuous separation of blood cells in spiral microfluidic devices
Nivedita Nivedita et al.
BIOMICROFLUIDICS (2013)
Miniaturized screening of polymers for amorphous drug stabilization (SPADS): Rapid assessment of solid dispersion systems
Nicole Wyttenbach et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2013)
Aerosolization characteristics of dry powder inhaler formulations for the excipient enhanced growth (EEG) application: Effect of spray drying process conditions on aerosol performance
Yoen-Ju Son et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2013)
A Novel Laboratory-Scale Spray Dryer to Produce Nanoparticles
Cordin Arpagaus
DRYING TECHNOLOGY (2012)
Microfluidic approaches for cancer cell detection, characterization, and separation
Jian Chen et al.
LAB ON A CHIP (2012)
Effect of particle shape and size on flow properties of lactose powders
Xiaowei Fu et al.
PARTICUOLOGY (2012)
A resettable dynamic microarray device
Kosuke Iwai et al.
BIOMEDICAL MICRODEVICES (2011)
The nano spray dryer B-90
Desmond Heng et al.
EXPERT OPINION ON DRUG DELIVERY (2011)
New insights into respirable protein powder preparation using a nano spray dryer
K. Buerki et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)
Nano spray drying: A novel method for preparing protein nanoparticles for protein therapy
Sie Huey Lee et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2011)
Using ultrasonic vacuum spray dryer to produce highly viable dry probiotics
David Semyonov et al.
LWT-FOOD SCIENCE AND TECHNOLOGY (2011)
An overview of the recent advances in spray-drying
Arun S. Mujumdar et al.
DAIRY SCIENCE & TECHNOLOGY (2010)
Analysis of Gas Admixing Foam Spray-Drying Process
Ireneusz Zbicinski et al.
DRYING TECHNOLOGY (2010)
A new technique for spray drying orange juice concentrate
Athanasia M. Goula et al.
INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2010)
Nanoparticles by spray drying using innovative new technology: The Buchi Nano Spray Dryer B-90
Xiang Li et al.
JOURNAL OF CONTROLLED RELEASE (2010)
Effect of Spray Nozzle Design on Fish Oil-Whey Protein Microcapsule Properties
Jerrad Legako et al.
JOURNAL OF FOOD SCIENCE (2010)
Spray Drying Technique. I: Hardware and Process Parameters
Krzysztof Cal et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2010)
EXPERIMENTAL VACUUM SPRAY DRYING OF PROBIOTIC FOODS INCLUDED WITH LACTIC ACID BACTERIA
Yutaka Kitamura et al.
JOURNAL OF FOOD PROCESSING AND PRESERVATION (2009)
Magnetic iron oxide nanoparticles: Synthesis, stabilization, vectorization, physicochemical characterizations, and biological applications
Sophie Laurent et al.
CHEMICAL REVIEWS (2008)
Pulse-Combustion Drying: Status and Potentials
T. Kudra
DRYING TECHNOLOGY (2008)
Effect of maltodextrin addition during spray drying of tomato pulp in dehumidified air: I. Drying kinetics and product recovery
Athanasia M. Goula et al.
DRYING TECHNOLOGY (2008)
Quality by design - Spray drying of insulin intended for inhalation
Morten Jonas Maltesen et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2008)
Continuous inertial focusing, ordering, and separation of particles in microchannels
Dino Di Carlo et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2007)
Production of spherical and uniform-sized particles using a laboratory ink-jet spray dryer
Kamlesh C. Patel et al.
ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING (2007)
Molecular and thermodynamic aspects of solubility advantage from solid dispersions
Shyam Sunder Bansal et al.
MOLECULAR PHARMACEUTICS (2007)
Improvement of the dissolution rate of nitrendipine using a new pulse combustion drying method
Liang Wang et al.
CHEMICAL & PHARMACEUTICAL BULLETIN (2007)
Applications of spray-drying in microencapsulation of food ingredients: An overview
Adem Gharsallaoui et al.
FOOD RESEARCH INTERNATIONAL (2007)
Monodisperse droplet generators as potential atomizers for spray drying technology
Winston Duo Wu et al.
DRYING TECHNOLOGY (2007)
Water sorption and glass transition properties of spray dried lactose hydrolysed skim milk powder
Ashok K. Shrestha et al.
LWT-FOOD SCIENCE AND TECHNOLOGY (2007)
Role of powder particle size on the encapsulation efficiency of oils during spray drying
Seid Mahdi Jafari et al.
DRYING TECHNOLOGY (2007)
Drying of foamed biological materials: Opportunities and challenges
C. Ratti et al.
DRYING TECHNOLOGY (2006)
Hygienic design requirements for spray drying operations
K Masters et al.
DRYING TECHNOLOGY (2006)
A glass transition temperature approach for the prediction of the surface stickiness of a drying droplet during spray drying
B Adhikari et al.
POWDER TECHNOLOGY (2005)
Spray-drying of alpha-amylase - The effect of process variables on the enzyme inactivation
K Samborska et al.
DRYING TECHNOLOGY (2005)
Spray-drying of cactus pear juice (Opuntia streptacantha): Effect on the physicochemical properties of powder and reconstituted product
GR Rodriguez-Hernandez et al.
DRYING TECHNOLOGY (2005)
Energy consumption of industrial spray dryers
CGJ Baker et al.
DRYING TECHNOLOGY (2005)
Spray drying of tomato pulp in dehumidified air: I. The effect on product recovery
AM Goula et al.
JOURNAL OF FOOD ENGINEERING (2005)
Spray drying of tomato pulp in dehumidified air: II. The effect on powder properties
AM Goula et al.
JOURNAL OF FOOD ENGINEERING (2005)
Ultrasonic atomisation into reduced pressure atmosphere - envisaging aseptic spray-drying for microencapsulation
S Freitas et al.
JOURNAL OF CONTROLLED RELEASE (2004)
Equipment, technology, perspectives and modeling of pulse combustion drying
I Zbicinski
CHEMICAL ENGINEERING JOURNAL (2002)
Modelling of particulate drying in theory and practice
IC Kemp et al.
DRYING TECHNOLOGY (2002)
Validation of a stochastic Lagrangian modelling approach for inter-particle collisions in homogeneous isotropic turbulence
M Sommerfeld
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2001)
分享论文
