相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Development of high-performance roll-to-roll-coated gas-diffusion-electrode-based fuel cells
Scott A. Mauger et al.
JOURNAL OF POWER SOURCES (2021)
Enabling industrial production of electrodes by use of slot-die coating for HT-PEM fuel cells
Merit Bodner et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2019)
Expert assessments of the cost and expected future performance of proton exchange membrane fuel cells for vehicles
Michael M. Whiston et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2019)
Dictating Pt-Based Electrocatalyst Performance in Polymer Electrolyte Fuel Cells, from Formulation to Application
Tim Van Cleve et al.
ACS APPLIED MATERIALS & INTERFACES (2019)
Mechanics of the low-flow limit in slot-die coating with no vacuum
Robert Malakhov et al.
AICHE JOURNAL (2019)
Homogeneity analysis of square meter-sized electrodes for PEM electrolysis and PEM fuel cells
Andrea Burdzik et al.
JOURNAL OF COATINGS TECHNOLOGY AND RESEARCH (2018)
Gravure Coating for Roll-to-Roll Manufacturing of Proton-Exchange-Membrane Fuel Cell Catalyst Layers
Scott A. Mauger et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)
Rheological Investigation on the Microstructure of Fuel Cell Catalyst Inks
Sunilkumar Khandavalli et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Improvement of Lithium-Ion Battery Performance by Two-Layered Slot-Die Coating Operation
Darjen Liu et al.
ENERGY TECHNOLOGY (2017)
A Review of the Operating Limits in Slot Die Coating Processes
Xiaoyu Ding et al.
AICHE JOURNAL (2016)
A 250-mm-width, flexible, and continuous roll-to-roll slot-die coated carbon nanotube/silver nanowire film fabrication and a study on the effect of anti-reflective overcoat
Keehyun Shin et al.
THIN SOLID FILMS (2016)
Improvement of lithium-ion battery performance using a two-layered cathode by simultaneous slot-die coating
Li-Chun Chen et al.
JOURNAL OF ENERGY STORAGE (2016)
Research Update: Large-area deposition, coating, printing, and processing techniques for the upscaling of perovskite solar cell technology
Stefano Razza et al.
APL MATERIALS (2016)
Transient response of two-layer slot coating flows to periodic disturbances
Danmer Maza et al.
AICHE JOURNAL (2015)
A monolithic device for CO2 photoreduction to generate liquid organic substances in a single-compartment reactor
Takeo Arai et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
A one-step roll-to-roll process of stable AgNW/PEDOT:PSS solution using imidazole as a mild base for highly conductive and transparent films: optimizations and mechanisms
Seyul Kim et al.
JOURNAL OF MATERIALS CHEMISTRY C (2015)
Analysis of the Microstructure Formation Process and Its Influence on the Performance of Polymer Electrolyte Fuel-Cell Catalyst Layers
Shinichi Takahashi et al.
CHEMELECTROCHEM (2015)
Non-destructive evaluation of slot-die-coated lithium secondary battery electrodes by in-line laser caliper and IR thermography methods
Debasish Mohanty et al.
ANALYTICAL METHODS (2014)
Ultra-slim flexible glass for roll-to-roll electronic device fabrication
Sean Garner et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2014)
Slot-die processing of lithium-ion battery electrodes-Coating window characterization
Marcel Schmitt et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2013)
Fast printing of thin, large area, ITO free electrochromics on flexible barrier foil
Roar R. Sondergaard et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2013)
Transparent conductive film by large area roll-to-roll processing
Linda Y. L. Wu et al.
THIN SOLID FILMS (2013)
Manufacture and demonstration of organic photovoltaic-powered electrochromic displays using roll coating methods and printable electrolytes
Jacob Jensen et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2012)
Operability window of slot coating using viscocapillary model for Carreau-type coating liquids
Hyun Jung Koh et al.
KOREA-AUSTRALIA RHEOLOGY JOURNAL (2012)
Electrocatalyst approaches and challenges for automotive fuel cells
Mark K. Debe
NATURE (2012)
Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating
Andreas Sandstrom et al.
NATURE COMMUNICATIONS (2012)
ITO-free flexible inverted organic solar cell modules with high fill factor prepared by slot die coating
B. Zimmermann et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions
Nieves Espinosa et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing
Frederik C. Krebs et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells
Lars Blankenburg et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Low-flow limit in slot coating of dilute solutions of high molecular weight polymer
OJ Romero et al.
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS (2004)
Review and analysis of PEM fuel cell design and manufacturing
V Mehta et al.
JOURNAL OF POWER SOURCES (2003)
Low-flow limit in slot coating: Theory and experiments
MS Carvalho et al.
AICHE JOURNAL (2000)