4.7 Article

Simplified sulfur-iodine cycle process to hydrogen blast furnace: Techno-economic and CO2 mitigation analysis

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Thermodynamics

Techno-economic and environmental impact analysis of tuyere injection of hot reducing gas from low-rank coal gasification in blast furnace

Jinsu Kim et al.

Summary: This study evaluates the techno-economic and environmental impact of injecting hot reducing gas from low-rank coal gasification in a blast furnace. By introducing rich syngas, coke use can be reduced without adverse effects on the blast furnace, leading to economic benefits and a significant reduction in CO2 emissions.

ENERGY (2022)

Article Engineering, Environmental

Heat, economic and multi-path safety (HEMPS) management on co-generation of hydrogen and sulfuric acid through modified sulfur-iodine cycle

JunKyu Park et al.

Summary: This research proposes a new framework for heat, safety, and economic management in the polygeneration system of hydrogen and sulfuric co-production. The results indicate a minimum temperature difference of 25 degrees Celsius for heat integration, with a expected reduction of 3% in capital and operating costs. A novel method for determining safety pipe numbers was also suggested, leading to a 35% total cost reduction.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2022)

Article Green & Sustainable Science & Technology

Mathematical simulation and life cycle assessment of blast furnace operation with hydrogen injection under constant pulverized coal

Jue Tang et al.

Summary: The study showed that injecting H-2 into the blast furnace leads to stable operation, increased productivity, reduced environmental impacts, especially a significant decrease in CO2 emissions.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Thermodynamics

An integrative process of blast furnace and SOEC for hydrogen utilization: Techno-economic and environmental impact assessment

Jinsu Kim et al.

Summary: The steel sector is exploring sustainable strategies to reduce CO2 emissions, including using renewable H-2 on blast furnaces. Research on utilizing SOEC process for H-2 injection, with techno-economic analysis, shows potential for reducing CO2 emissions and economic viability in the future.

ENERGY CONVERSION AND MANAGEMENT (2021)

Article Chemistry, Physical

Process optimization and safety assessment on a pilot-scale Bunsen process in sulfur-iodine cycle

JunKyu Park et al.

Summary: This study investigates the optimal conditions and equipment specifications for the Bunsen reaction in the sulfur-iodine cycle, focusing on maximizing HI yield and minimizing impurities in HIx. The study also considers reaction safety and dispersion of gases and solutions in case of leakage accidents. The results show increased HI production and reduced H2SO4 impurities after optimization.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)

Article Environmental Sciences

Source apportionment of pulping wastewater and application of mechanical vapor recompression: Environmental and economic analyses

Jun Xu et al.

Summary: The study introduced the equal-standard pollution load model into the pulp and paper field to analyze pollution sources, identifying screw press and concentrating as major pollution unit operations. Results suggested MVR technology significantly reduces pollution load and operational costs.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2021)

Article Chemistry, Multidisciplinary

Catholyte-free electroreduction of CO2 for sustainable production of CO: concept, process development, techno-economic analysis, and CO2 reduction assessment

Jaeseo Lee et al.

Summary: The study focuses on examining CO production performance using CF-ECO2R, which shows higher energy conversion efficiency and lower cell voltage compared to traditional methods. The developed mathematical model and techno-economic analyses suggest that the technology is feasible, economically competitive, and has the potential to reduce CO2 emissions significantly. Operating voltage of CF-ECO2R and regional factors strongly impact the cost and CO2 emissions of the system.

GREEN CHEMISTRY (2021)

Review Thermodynamics

A review and comparative evaluation of thermochemical water splitting cycles for hydrogen production

Farid Safari et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

Article Chemistry, Multidisciplinary

Techno-economic analysis of methanol production from joint feedstock of coke oven gas and basic oxygen furnace gas from steel-making

Jeong-Keun Lee et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2019)

Article Materials Science, Multidisciplinary

Increased Use of Natural Gas in Blast Furnace Ironmaking: Mass and Energy Balance Calculations

Megha Jampani et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2019)

Article Engineering, Chemical

Study of Alternative Reactor-Separator Network in Bunsen Process of Sulfur-Iodine Cycle for Hydrogen Production

JunKyu Park et al.

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN (2019)

Article Chemistry, Applied

Estimating Precommercial Heterogeneous Catalyst Price: A Simple Step-Based Method

Frederick G. Baddour et al.

ORGANIC PROCESS RESEARCH & DEVELOPMENT (2018)

Article Chemistry, Physical

Current R&D status of thermochemical water splitting iodine-sulfur process in Japan Atomic Energy Agency

S. Kasahara et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)

Article Green & Sustainable Science & Technology

Modeling and simulation of hydrogen injection into a blast furnace to reduce carbon dioxide emissions

Can Yilmaz et al.

JOURNAL OF CLEANER PRODUCTION (2017)

Article Multidisciplinary Sciences

Life Cycle Assessment of Metals: A Scientific Synthesis

Philip Nuss et al.

PLOS ONE (2014)

Article Chemistry, Physical

Hydrogen production by flue gas through sulfur-iodine thermochemical process: Economic and energy evaluation

Raffaele Liberatore et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Article Chemistry, Physical

A sulfur-iodine flowsheet using precipitation, electrodialysis, and membrane separation to produce hydrogen

Youngjoon Shin et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2012)

Article Metallurgy & Metallurgical Engineering

Simulation of Blast Furnace Operation with Intensive Hydrogen Injection

Hiroshi Nogami et al.

ISIJ INTERNATIONAL (2012)

Article Chemistry, Physical

An evaluation of hydrogen production from the perspective of using blast furnace gas and coke oven gas as feedstocks

Wei-Hsin Chen et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

Article Metallurgy & Metallurgical Engineering

Development of green suspension ironmaking technology based on hydrogen reduction of iron oxide concentrate: rate measurements

M. E. Choi et al.

IRONMAKING & STEELMAKING (2010)

Article Chemistry, Physical

Global warming potential of the sulfur-iodine process using life cycle assessment methodology

William C. Lattin et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2009)

Article Engineering, Chemical

Effects of process parameters of the IS process on total thermal efficiency to produce hydrogen from water

S Kasahara et al.

JOURNAL OF CHEMICAL ENGINEERING OF JAPAN (2003)