☆ 4.7 Article

Improvement of mechanical properties of in situ Mg-Si composites via Cu addition and hot working

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Synergistic Effects of Cerium-Based Rare Earth Addition and Hot Deformation on the Microstructure and Mechanical Properties of Mg-0.5Zn-0.5Zr Magnesium Alloy

Hooman Abedi et al.

Summary: The addition of RE can effectively refine the microstructure of the alloy, but high RE content may lead to less effective grain refinement and the appearance of coarse dendritic microstructure. Extrusion results in fragmentation and dispersion of intermetallics, as well as significant grain refinement due to recrystallization processes.

METALS AND MATERIALS INTERNATIONAL (2022)

添加到收藏夹

Review Engineering, Civil

Superplasticity of high-entropy alloys: a review

Reza Motallebi et al.

Summary: High-entropy alloys (HEAs) are a new class of engineering materials with unique mechanical and functional properties. Superplastic forming of HEAs might be a viable route for actual applications of these alloys. This monograph summarized the superplastic behaviors of HEAs and medium-entropy alloys (MEAs), along with reviewing the basics of high-entropy alloys and fine-grained superplasticity.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhanced mechanical properties of AZ91 magnesium alloy by inoculation and hot deformation

Mohammad Sajad Mehranpour et al.

Summary: The study focused on enhancing the mechanical properties of AZ91 magnesium alloy through the addition of a newly developed Al-5Ti-2B master alloy and subsequent hot extrusion process for structural refinement. The results showed that the grain refinement achieved through the addition of the master alloy and hot extrusion process led to an improvement in mechanical properties, with a superior strength-ductility trade-off compared to the as-cast counterparts. This was attributed to the disappearance of the grain boundary beta-Mg17Al12 phase and the formation of a recrystallized and homogeneous microstructure in the extruded alloys.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties enhancement of Mg-4Si in-situ composites by friction stir processing

R. Taghiabadi et al.

Summary: Friction stir processing significantly improves the mechanical properties of Mg-4Si composite, with specific traverse and rotation speeds yielding the best results. The alloy's performance enhancement is mainly attributed to the effective refinement and even distribution of Mg2Si particles, the formation of ultrafine grains, and the elimination of casting defects.

MATERIALS SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Role of Antibacterial Metallic Elements in Simultaneously Improving the Corrosion Resistance and Antibacterial Activity of Magnesium Alloys

Zhensheng Lin et al.

Summary: Magnesium-based biodegradable alloys show excellent mechanical properties and bioactivity in orthopedic applications, but their fast degradation rate may hinder the healing process. Alloying with antibacterial elements or coatings can enhance corrosion resistance without compromising antibacterial activity.

MATERIALS & DESIGN (2021)

添加到收藏夹

Review Engineering, Civil

Recent advances in the kinetics of normal/abnormal grain growth: a review

Fateme Najafkhani et al.

Summary: This overview article presents recent progress in the kinetics of grain coarsening and abnormal grain growth (AGG), summarizing factors affecting grain growth kinetics and critical values for various engineering alloys, as well as discussing the mechanisms and kinetics of AGG.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Civil

Enhanced tensile properties of as-cast Mg-10Al magnesium alloy via strontium addition and hot working

Fereshte Ghorbani et al.

Summary: The study focused on grain refinement and enhancement of tensile properties of a Mg-10Al magnesium alloy ingot through strontium addition (up to 1 wt%) and hot working (extrusion process). Addition of 0.05 wt% Sr led to grain refinement and the best strength-ductility combination. Extruded alloys exhibited significantly higher strength and ductility compared to as-cast ingots, with UTS of around 406 MPa and total elongation of about 24% achieved for the alloy with 0.05 wt% Sr.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Civil

Synergistic effects of alloying, homogenization, and hot extrusion on the mechanical properties of as-cast Mg-Al-Ca magnesium alloys

Zahra Nasiri et al.

Summary: The synergistic effects of partial replacement of Al with Ca, homogenization heat treatment, and hot extrusion on the microstructure and mechanical properties of Mg-(7-x)Al-xCa magnesium alloys were studied. Homogenization resulted in eutectic constituents spheroidization and tensile ductility improvement, while hot extrusion led to fragmentation and dispersion of particles, formation of fine microstructures, and profound enhancements of tensile properties. The extruded AX43 alloy showed significantly better product of strength and ductility compared to the as-cast counterpart.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhanced mechanical properties of as-cast Mg-Al-Ca magnesium alloys by friction stir processing

Zahra Nasiri et al.

Summary: Friction stir processing leads to significant grain refinement and enhancement of mechanical properties in magnesium alloys. Calcium-containing alloys show more intense grain refinement due to the presence of thermally-stable Al-Ca intermetallics. The AX43 alloy with a grain size of 1.7µm exhibits the best tensile properties.

MATERIALS LETTERS (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

High strain rate superplasticity via friction stir processing (FSP): A review

Hamed Mirzadeh

Summary: This overview article summarizes the high strain rate superplasticity achieved through friction stir processing (FSP), emphasizing the importance of microstructural characteristics for superplastic forming operations. It also discusses the effects of main processing parameters on heat input and grain size, as well as recent progress in the application of FSP for processing superplastic materials.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of microalloying by Ca on the microstructure and mechanical properties of as-cast and wrought Mg-Mg2Si composites

Mehrab Lotfpour et al.

Summary: The study investigated the effects of calcium addition and hot extrusion process on the microstructure modification and mechanical properties enhancement of Mg-3Si metal matrix composite. It was found that calcium addition modified the Mg2Si phase and refined the matrix grains, while hot extrusion induced extreme grain refinement and break up of the eutectic structure, leading to remarkable improvements in tensile properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural effects on mechanical properties and degradation behavior of Mg-Cu alloy

Xudong Yan et al.

Summary: The study found that magnesium-copper alloys with low copper content and solid solution treatment exhibit better mechanical properties and corrosion resistance, while alloys with higher copper content are prone to corrosion. The decrease in Mg2Cu phase content in the solid solution treated alloys leads to improved corrosion resistance and better biocompatibility.

MATERIALIA (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A facile new modified method for the preparation of a new cerium-doped lanthanium cuperate perovskite energy storage system using nanotechnology

Mervette El Batouti et al.

Summary: A defect crystalline structure perovskite cerium-doped lanthanum cuprate sample was prepared with high ferroelectric characteristics and efficient energy storage capacity, recommending its use in energy storage systems.

NEW JOURNAL OF CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Physical

Development of titanium particulate reinforced AZ31 magnesium matrix composites via friction stir processing

Isaac Dinaharan et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Chemistry, Physical

Effect of Zn addition on the microstructure and mechanical properties of Mg-0.5Ca-0.5RE magnesium alloy

Mahbod Golrang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tailoring the mechanical properties of Mg-Zn magnesium alloy by calcium addition and hot extrusion process

Z. Zareian et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Latest research advances on magnesium and magnesium alloys worldwide

Jiangfeng Song et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Enhanced mechanical properties of as-cast AZ91 magnesium alloy by combined RE-Sr addition and hot extrusion

Aria Afsharnaderi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of die parameters on the grain size, mechanical properties and fracture mechanism of extruded AZ31 magnesium alloys

Onder Ayer

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Si content and Ca modification on microstructure and thermal expansion property of Mg-Si alloys

Tian Guo et al.

MATERIALS CHEMISTRY AND PHYSICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical Behavior of As-Cast and Extruded Mg-Si-Ni-Ca Magnesium Alloys

Omid Marjani et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Structure and mechanical behavior ofin situdeveloped Mg2Si phase in magnesium and aluminum alloys - a review

Prem Prakash Seth et al.

RSC ADVANCES (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Magnesium extrusion alloys: a review of developments and prospects

Zhuoran Zeng et al.

INTERNATIONAL MATERIALS REVIEWS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Fine tuning the mechanical properties of dual phase steel via thermomechanical processing of cold rolling and intercritical annealing

Sheida Nikkhah et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Homogenization-induced age-hardening behavior and room temperature mechanical properties of Mg-4Zn-0.5Ca-0.16Mn (wt%) alloy

Partha Duley et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Chemistry, Physical

Constitutive analysis of wrought Mg-Gd magnesium alloys during hot compression at elevated temperatures

Mohammad Hossein Barezban et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Si and Ni on microstructure and mechanical properties of in-situ magnesium-based composites in the as-cast and extruded conditions

Amir Reza Salasel et al.

MATERIALS CHEMISTRY AND PHYSICS (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of Grain Size on Mechanical Properties and Work-Hardening Behavior of AISI 304 Austenitic Stainless Steel

Meysam Naghizadeh et al.

STEEL RESEARCH INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A new intermetallic phase formation in Mg-Si-Ni magnesium-based in-situ formed alloys

Nima Barri et al.

VACUUM (2019)

添加到收藏夹

Article Chemistry, Applied

Extraction of eco-friendly and biodegradable surfactant for inhibition of copper corrosion during acid pickling

Mervette Elbatouti et al.

ADSORPTION SCIENCE & TECHNOLOGY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of the Mg-Zn-Cu/SiCp composite in the as-cast and as-extruded conditions

Afshin Nafari et al.

JOURNAL OF MATERIALS RESEARCH (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unraveling the effects of Zn addition and hot extrusion process on the microstructure and mechanical properties of as-cast Mg-2Al magnesium alloy

Marjan Razzaghi et al.

VACUUM (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluating the Effect of Hot-Rolling Reduction on the Mechanical Properties of In Situ Formed Aluminum-Magnesium-Silicon (Al-Mg2Si) Composites

Rashadoddin Zamani et al.

ADVANCED ENGINEERING MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Influence of Nd addition on microstructures and mechanical properties of a hot-extruded Mg-6.0Zn-0.5Zr (wt.%) alloy

Shuhui Lv et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent progress of reinforcement materials: a comprehensive overview of composite materials

Dipen Kumar Rajak et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancement of the microstructure and elevated temperature mechanical properties of as-cast Mg-Al2Ca-Mg2Ca in-situ composite by hot extrusion

F. Khorasani et al.

MATERIALS CHARACTERIZATION (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical properties of a hot deformed Al-Mg2Si in-situ composite

Rashadoddin Zamani et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural modification and its effect on strengthening mechanism and yield asymmetry of in-situ TiC-TiB2/ AZ91 magnesium matrix composite

B. N. Sahoo et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of hybrid extrusion and solution treatment on the microstructure and degradation behavior of Mg-0.1Cu alloy

Xudong Yan et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of hybrid extrusion and solution treatment on the microstructure and degradation behavior of Mg-0.1Cu alloy

Xudong Yan et al.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Elucidating the effect of intermetallic compounds on the behavior of Mg-Gd-Al-Zn magnesium alloys at elevated temperatures

Bita Pourbahari et al.

JOURNAL OF MATERIALS RESEARCH (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of Cu addition on the microstructure and mechanical properties of as-cast and heat treated Mg-6Zn-4Al magnesium alloy

Shaozhen Zhu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Recent research and developments on wrought magnesium alloys

Sihang You et al.

JOURNAL OF MAGNESIUM AND ALLOYS (2017)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of Cu addition on microstructure and mechanical properties of as-cast Mg-6Zn magnesium alloy

Yu Zhang et al.

CHINA FOUNDRY (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

The microstructure and creep characteristics of cast Mg-3Si and Mg-3Si-1Gd alloys

Z. Tanhaee et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Biodegradable Mg-Cu alloys with enhanced osteogenesis, angiogenesis, and long-lasting antibacterial effects

Chen Liu et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

Room temperature mechanical properties of Mg-Cu-Al alloys synthesized using powder metallurgy method

Muhammad Rashad et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of Cu addition on microstructure and mechanical properties of as-cast magnesium alloy ZK60

Hong-mei Zhu et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hot tensile deformation and fracture behaviors of AZ31 magnesium alloy

Jiao Deng et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Morphology modification of Mg2Si by Sr addition in Mg-4%Si alloy

Tang Shou-qiu et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)

添加到收藏夹

Article Engineering, Industrial

Modification of Mg2Si morphology in Mg-Si alloys with Bi

E. J. Guo et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effects of Cu and Mn on mechanical properties and damping capacity of Mg-Cu-Mn alloy

Zhang Zhen-yan et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2008)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural formation in a hypereutectic Mg-Si alloy

YC Pan et al.

MATERIALS CHARACTERIZATION (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Modification of Mg2Si in Mg-Si alloys with yttrium

QC Jiang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent magnesium alloy development for elevated temperature applications

AA Luo

INTERNATIONAL MATERIALS REVIEWS (2004)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of a thixocast Mg-Cu-Y alloy

JM Kim et al.

SCRIPTA MATERIALIA (2003)

添加到收藏夹

Article Chemistry, Physical

Damping properties of a sintered Mg-Cu-Mn alloy

K Nishiyama et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.