相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。The microstructure evolution and tensile properties of medium-Mn steel heat-treated by a two-step annealing process
D. P. Yang et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)
Microstructure-mechanical property evaluation and deformation mechanism in Al added medium Mn steel processed through intercritical rolling and annealing
Biraj Kumar Sahoo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Enhancement austenite content in medium-Mn steel by introducing cold-rolled deformation and inhibiting subsequent recrystallization
Tianle Li et al.
MATERIALS LETTERS (2021)
The role of austenite stability on the change of fracture mode in a dual-phase medium Mn steel having a lamellar microstructure
T. T. T. Trang et al.
MATERIALS CHARACTERIZATION (2021)
Novel 1.4 GPa-strength medium-Mn steel with uncompromised high ductility
Shu Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Effect of austenitization of cold-rolled 10 wt% Mn steel on microstructure and discontinuous yielding
Dong Hwi Kim et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Mechanical response of a medium manganese steel with encapsulated austenite
Yong Li et al.
SCRIPTA MATERIALIA (2020)
Design of a high strength, high ductility 12 wt% Mn medium manganese steel with hierarchical deformation behaviour
T. W. J. Kwok et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Composition and processing design of medium-Mn steels based on CALPHAD, SFE modeling, and genetic optimization
John S. Aristeidakis et al.
ACTA MATERIALIA (2020)
Effect of Different Heat Treatment Processes on Microstructure Evolution and Tensile Properties of Hot-Rolled Medium-Mn Steel
Chunquan Liu et al.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS (2020)
Strengthening mechanisms of Nb and V microalloying high strength hot-stamped steel
Weijian Chen et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Extra work hardening in room-temperature quenching and partitioning medium Mn steel enabled by intercritical annealing
B. B. He et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Microstructural evolution and mechanical behavior of a novel heterogeneous medium Mn cold-rolled steel
Xiliang Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Austenite stability and deformation-induced transformation mechanism in cold-rolled medium-Mn steel
T. P. Zhou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Reverse transformation from martensite into austenite in a medium-Mn steel
D. P. Yang et al.
SCRIPTA MATERIALIA (2019)
By controlling recrystallization degree: A plain medium Mn steel overcoming Luders deformation and low yield-to-tensile ratio simultaneously
Shu Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Strong and ductile steel via high dislocation density and heterogeneous nano/ultrafine grains
Gang Niu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Stabilizing austenite via a core-shell structure in the medium Mn steels
Xinhao Wan et al.
SCRIPTA MATERIALIA (2019)
Coupling nano-carbide strengthening with transformation induced plasticity effect to achieve over 1.5 GPa strength with 30% ductility in cold-rolled medium-Mn steel
Jiajia Li et al.
VACUUM (2019)
Enhancing austenite stability in a new medium-Mn steel by combining deep cryogenic treatment and intercritical annealing: An experimental and theoretical study
Ning Yan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Effect of Deformation Temperature on the Portevin-Le Chatelier Effect in Medium-Mn Steel
Barbara Grzegorczyk et al.
METALS (2019)
Multi-scale characterization of austenite reversion and martensite recovery in a cold-rolled medium-Mn steel
J. T. Benzing et al.
ACTA MATERIALIA (2019)
Growth mode of austenite during reversion from martensite in Fe-2Mn-1.5Si-0.3C alloy: A transition in kinetics and morphology
Xianguang Zhang et al.
ACTA MATERIALIA (2018)
The influence of silicon additions on the deformation behavior of austenite-ferrite duplex medium manganese steels
Binhan Sun et al.
ACTA MATERIALIA (2018)
Effect of pre-existed austenite on austenite reversion and mechanical behavior of an Fe-0.2C-8Mn-2Al medium Mn steel
Ran Ding et al.
ACTA MATERIALIA (2018)
On the characteristics of Portevin-Le Chatelier bands in cold-rolled 7Mn steel showing transformation induced plasticity
Feng Yang et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Impact of Reversed Austenite on the Impact Toughness of the High-Strength Steel of Low Carbon Medium Manganese
Guanqiao Su et al.
JOM (2018)
Review of Manganese Processing for Production of TRIP/TWIP Steels, Part 1: Current Practice and Processing Fundamentals
R. Elliott et al.
JOM (2018)
Dynamic Strain Aging Phenomena and Tensile Response of Medium-Mn TRIP Steel
Daniel M. Field et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
An ultrahigh strength and enhanced ductility cold-rolled medium-Mn steel treated by intercritical annealing
Xuan Li et al.
SCRIPTA MATERIALIA (2018)
Ductile and intergranular brittle fracture in a two-step quenching and partitioning steel
Zhiping Xiong et al.
SCRIPTA MATERIALIA (2018)
Microstructure Evolution during Reverse Transformation of Austenite from Tempered Martensite in Low Alloy Steel
Tomoya Shinozaki et al.
ISIJ INTERNATIONAL (2017)
A strong and ductile 7Mn steel manufactured by warm rolling and exhibiting both transformation and twinning induced plasticity
Bin Hu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2017)
Correlation between strain rate sensitivity and characteristics of Portevin-LeChatelier bands in a twinning-induced plasticity steel
Xiangde Bian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Effects of hot/cold deformation on the microstructures and mechanical properties of ultra-low carbon medium manganese quenching-partitioning-tempering steels
Yu Li et al.
ACTA MATERIALIA (2017)
Experimental investigation on a novel medium Mn steel combining transformation-induced plasticity and twinning-induced plasticity effects
B. B. He et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Mechanical properties and deformation behavior in hot-rolled 0.2C-1.5/3A1-8.5Mn-Fe TRIP steel: The discontinuous TRIP effect
Z. C. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Austenite stability and its effect on the toughness of a high strength ultra-low carbon medium manganese steel plate
Y. Zou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Dissolution and precipitation behaviour in steels microalloyed with niobium during thermomechanical processing
P. Gong et al.
ACTA MATERIALIA (2015)
Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content
Z. H. Cai et al.
ACTA MATERIALIA (2015)
Kinetics of Solute Partitioning During Intercritical Annealing of a Medium-Mn Steel
H. Kamoutsi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
The effects of the heating rate on the reverse transformation mechanism and the phase stability of reverted austenite in medium Mn steels
Jeongho Han et al.
ACTA MATERIALIA (2014)
Stability of retained austenite in multi-phase microstructure during austempering and its effect on the ductility of a low carbon steel
Z. J. Xie et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Annealing Temperature Dependence of the Tensile Behavior of 10 pct Mn Multi-phase TWIP-TRIP Steel
Sangwon Lee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2014)
Inheritance of Dislocations and Crystallographic Texture during Martensitic Reversion into Austenite
Nobuo Nakada et al.
ISIJ INTERNATIONAL (2013)
The effect of morphology on the stability of retained austenite in a quenched and partitioned steel
X. C. Xiong et al.
SCRIPTA MATERIALIA (2013)
High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels
R. Blonde et al.
ACTA MATERIALIA (2012)
A Criterion for the Change from Fast to Slow Regime of Cementite Dissolution in Fe–C–Mn Steels
M. Gouné et al.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2012)
Deformation behavior of ferrite-austenite duplex lightweight Fe-Mn-Al-C steel
Chang-Hyo Seo et al.
SCRIPTA MATERIALIA (2012)
Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability
C. Herrera et al.
ACTA MATERIALIA (2011)
High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships
O. Bouaziz et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2011)
Processing Opportunities for New Advanced High-Strength Sheet Steels
David K. Matlock et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Enhanced work-hardening behavior and mechanical properties in ultrafine-grained steels with large-fractioned metastable austenite
Jie Shi et al.
SCRIPTA MATERIALIA (2010)
Deformation behavior of TRIP and DP steels in tension at different temperatures over a wide range of strain rates
S. Curtze et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
The Portevin-Le Chatelier (PLC) effect and shear band formation in an AA5754 alloy
Herdawandi Halim et al.
ACTA MATERIALIA (2007)
Variant selection of reversed austenite in lath martensite
Nobuo Nakada et al.
ISIJ INTERNATIONAL (2007)
Effect of strain rate on the strain-induced γ→α′-martensite transformation and mechanical properties of austenitic stainless steels
J Talonen et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)