相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Stress-assisted (γ→α′) and strain-induced (γ→ε→α′) phase transformation kinetics laws implemented in a crystal plasticity model for predicting strain path sensitive deformation of austenitic steels
Zhangxi Feng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
A full-field crystal plasticity model including the effects of precipitates: Application to monotonic, load reversal, and low-cycle fatigue behavior of Inconel 718
Adnan Eghtesad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Identification of crystal plasticity model parameters by multi-objective optimization integrating microstructural evolution and mechanical data
Daniel J. Savage et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)
Modelling dynamic recrystallisation in magnesium alloy AZ31
Kenneth J. Tam et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
A crystal plasticity finite element model embedding strain-rate sensitivities inherent to deformation mechanisms: Application to alloy AZ31
William G. Feather et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Finite element analysis using an incremental elasto-visco-plastic self-consistent polycrystal model: FE simulations on Zr and low-carbon steel subjected to bending, stress-relaxation, and unloading
Youngung Jeong et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Modeling cyclic plasticity of additively manufactured alloy Mar-M-509 using a high-performance spectral-based micromechanical model
Adnan Eghtesad et al.
APPLICATIONS IN ENGINEERING SCIENCE (2021)
Microstructure and texture evolution in Mg/Nb layered materials made by accumulative roll bonding
Daniel J. Savage et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
A multi-GPU implementation of a full-field crystal plasticity solver for efficient modeling of high-resolution microstructures
Adnan Eghtesad et al.
COMPUTER PHYSICS COMMUNICATIONS (2020)
Modeling of the thermo-mechanical response and texture evolution of WE43 Mg alloy in the dynamic recrystallization regime using a viscoplastic self-consistent formulation
Miroslav Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
High-performance full-field crystal plasticity with dislocation-based hardening and slip system back-stress laws: Application to modeling deformation of dual-phase steels
Adnan Eghtesad et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Predicting deformation behavior of α-uranium during tension, compression, load reversal, rolling, and sheet forming using elasto-plastic, multi-level crystal plasticity coupled with finite elements
Timothy J. Barrett et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Modelling the temperature and texture effects on the deformation mechanisms of magnesium alloy AZ31
Kenneth J. Tam et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
A comparative study between elasto-plastic self-consistent crystal plasticity and anisotropic yield function with distortional hardening formulations for sheet metal forming
Zhangxi Feng et al.
MECHANICS OF MATERIALS (2020)
Deep drawing simulations using the finite element method embedding a multi-level crystal plasticity constitutive law: Experimental verification and sensitivity analysis
Timothy J. Barrett et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Mechanical response, twinning, and texture evolution of WE43 magnesium-rare earth alloy as a function of strain rate: Experiments and multi-level crystal plasticity modeling
William G. Feather et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Exploring new links between crystal plasticity models and high-energy X-ray diffraction microscopy
Paul A. Shadea et al.
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2019)
An implicit formulation of the elasto-plastic self-consistent polycrystal plasticity model and its implementation in implicit finite elements
Milovan Zecevic et al.
MECHANICS OF MATERIALS (2019)
Modelling recrystallization textures driven by intragranular fluctuations implemented in the viscoplastic self-consistent formulation
Miroslav Zecevic et al.
ACTA MATERIALIA (2019)
A crystallographic extension to the Olson-Cohen model for predicting strain path dependence of martensitic transformation
Milovan Zecevic et al.
ACTA MATERIALIA (2019)
A generalized spherical harmonics-based procedure for the interpolation of partial datasets of orientation distributions to enable crystal mechanics-based simulations
Timothy J. Barrett et al.
MATERIALIA (2019)
A new approach to fluid-structure interaction within graphics hardware accelerated smooth particle hydrodynamics considering heterogeneous particle size distribution
Adnan Eghtesad et al.
COMPUTATIONAL PARTICLE MECHANICS (2018)
Compact reconstruction of orientation distributions using generalized spherical harmonics to advance large-scale crystal plasticity modeling: Verification using cubic, hexagonal, and orthorhombic polycrystals
Adnan Eghtesad et al.
ACTA MATERIALIA (2018)
Graphics processing unit accelerated phase field dislocation dynamics: Application to bi-metallic interfaces
Adnan Eghtesad et al.
ADVANCES IN ENGINEERING SOFTWARE (2018)
Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Modeling of intragranular misorientation and grain fragmentation in polycrystalline materials using the viscoplastic self-consistent formulation
Miroslav Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Explicit modeling of double twinning in AZ31 using crystal plasticity finite elements for predicting the mechanical fields for twin variant selection and fracture analyses
Milan Ardeljan et al.
ACTA MATERIALIA (2018)
A new visco-plastic self-consistent formulation implicit in dislocation-based hardening within implicit finite elements: Application to high strain rate and impact deformation of tantalum
Miroslav Zecevic et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
OpenMP and MPI implementations of an elasto-viscoplastic fast Fourier transform-based micromechanical solver for fast crystal plasticity modeling
Adnan Eghtesad et al.
ADVANCES IN ENGINEERING SOFTWARE (2018)
Spectral database constitutive representation within a spectral micromechanical solver for computationally efficient polycrystal plasticity modelling
Adnan Eghtesad et al.
COMPUTATIONAL MECHANICS (2018)
Elevated Temperature Effects on the Plastic Anisotropy of an Extruded Mg-4 Wt Pct Li Alloy: Experiments and Polycrystal Modeling
Marcel Risse et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Effect of dislocation density-twin interactions on twin growth in AZ31 as revealed by explicit crystal plasticity finite element modeling
Milan Ardeljan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Predicting intragranular misorientation distributions in polycrystalline metals using the viscoplastic self-consistent formulation
Miroslav Zecevic et al.
ACTA MATERIALIA (2017)
Mechanical behavior of low carbon steel subjected to strain path changes: Experiments and modeling
W. Wen et al.
ACTA MATERIALIA (2016)
Average intragranular misorientation trends in polycrystalline materials predicted by a viscoplastic self-consistent approach
Ricardo A. Lebensohn et al.
ACTA MATERIALIA (2016)
The plasticity of highly oriented nano-layered Zr/Nb composites
Milan Ardeljan et al.
ACTA MATERIALIA (2016)
A numerical procedure enabling accurate descriptions of strain rate-sensitive flow of polycrystals within crystal visco-plasticity theory
Marko Knezevic et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2016)
Demonstration of alloying, thermal activation, and latent hardening effects on quasi-static and dynamic polycrystal plasticity of Mg alloy, WE43-T5, plate
J. J. Bhattacharyya et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Transitioning rate sensitivities across multiple length scales: Microstructure-property relationships in the Taylor cylinder impact test on zirconium
Miroslav Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Latent hardening and plastic anisotropy evolution in AA6060 aluminium alloy
M. Khadyko et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: Application to AZ31 magnesium alloy
Milan Ardeljan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Dual-phase steel sheets under cyclic tension-compression to large strains: Experiments and crystal plasticity modeling
Milovan Zecevic et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Modeling discrete twin lamellae in a microstructural framework
Marko Knezevic et al.
SCRIPTA MATERIALIA (2016)
Strain rate and temperature effects on the selection of primary and secondary slip and twinning systems in HCP Zr
Marko Knezevic et al.
ACTA MATERIALIA (2015)
Explicit incorporation of deformation twins into crystal plasticity finite element models
Milan Ardeljan et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)
A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: Application to AA6022-T4
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Mechanical behavior of Mg subjected to strain path changes: Experiments and modeling
W. Wen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
A study of microstructure-driven strain localizations in two-phase polycrystalline HCP/BCC composites using a multi-scale model
Milan Ardeljan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
The Influence of Sample Preparation on the Quantitative Analysis of the Volume Fraction of Martensite Formed in a 304L Trip Steel
Juciane Maria Alves et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2015)
A multiscale simulation framework of the accumulative roll bonding process accounting for texture evolution
A. Prakash et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: Application to strain path changes in HCP metals
Milovan Zecevic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Procedures for reducing large datasets of crystal orientations using generalized spherical harmonics
Marko Knezevic et al.
MECHANICS OF MATERIALS (2015)
Growth Twins and Deformation Twins in Metals
Irene J. Beyerlein et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 44 (2014)
A high-performance computational framework for fast crystal plasticity simulations
Marko Knezevic et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models
Marko Knezevic et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2014)
Stochastic modeling of twin nucleation in polycrystals: An application in hexagonal close-packed metals
Stephen R. Niezgoda et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
On the strength of dislocation interactions and their effect on latent hardening in pure Magnesium
N. Bertin et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
A dislocation density based crystal plasticity finite element model: Application to a two-phase polycrystalline HCP/BCC composites
Milan Ardeljan et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)
Mechanical twinning and detwinning in pure Ti during loading and unloading - An in situ high-energy X-ray diffraction microscopy study
L. Wang et al.
SCRIPTA MATERIALIA (2014)
Key computational modeling issues in Integrated Computational Materials Engineering
Jitesh H. Panchal et al.
COMPUTER-AIDED DESIGN (2013)
Long range internal stresses in single-phase crystalline materials
M. E. Kassner et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
A crystallographic dislocation model for describing hardening of polycrystals during strain path changes. Application to low carbon steels
K. Kitayama et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
A polycrystal plasticity model for predicting mechanical response and texture evolution during strain-path changes: Application to beryllium
Marko Knezevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
GSAS-II: the genesis of a modern open-source all purpose crystallography software package
Brian H. Toby et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2013)
Integration of self-consistent polycrystal plasticity with dislocation density based hardening laws within an implicit finite element framework: Application to low-symmetry metals
Marko Knezevic et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
Twinning and de-twinning in beryllium during strain path changes
D. W. Brown et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Modeling bending of α-titanium with embedded polycrystal plasticity in implicit finite elements
Marko Knezevic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
A slip system-based kinematic hardening model application to in situ neutron diffraction of cyclic deformation of austenitic stainless steel
J. A. Wollmershauser et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Role of twinning and slip during compressive deformation of beryllium as a function of strain rate
D. W. Brown et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials
Ricardo A. Lebensohn et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Multiscale modeling of plasticity based on embedding the viscoplastic self-consistent formulation in implicit finite elements
Javier Segurado et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
A constitutive model of twinning and detwinning for hexagonal close packed polycrystals
H. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Modelling the plastic behaviour of metals under complex loading conditions
E. F. Rauch et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2011)
Deformation twinning in AZ31: Influence on strain hardening and texture evolution
Marko Knezevic et al.
ACTA MATERIALIA (2010)
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
F. Roters et al.
ACTA MATERIALIA (2010)
Detwinning of High-Purity Zirconium: In-Situ Neutron Diffraction Experiments
G. Proust et al.
EXPERIMENTAL MECHANICS (2010)
Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction
C. J. Neil et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
Influence of strain rate on mechanical properties and deformation texture of hot-pressed and rolled beryllium
T. A. Sisneros et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Rietveld texture analysis from TOF neutron diffraction data
H. -R. Wenk et al.
POWDER DIFFRACTION (2010)
Crystal plasticity simulations using discrete Fourier transforms
Marko Knezevic et al.
ACTA MATERIALIA (2009)
Grain size and orientation distributions: Application to yielding of α-titanium
Bradley S. Fromm et al.
ACTA MATERIALIA (2009)
Reorientation and stress relaxation due to twinning:: Modeling and experimental characterization for Mg
B. Clausen et al.
ACTA MATERIALIA (2008)
Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystals
Marko Knezevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
A dislocation-based constitutive law for pure Zr including temperature effects
I. J. Beyerlein et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Modeling the temperature dependent effect of twinning on the behavior of magnesium alloy AZ31B sheet
A. Jain et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Modeling texture, twinning and hardening evolution during deformation of hexagonal materials
G. Proust et al.
ACTA MATERIALIA (2007)
Simulation of earing during deep drawing of magnesium alloy AZ31
Tom Walde et al.
ACTA MATERIALIA (2007)
Development of crystallographic texture during high rate deformation of rolled and hot-pressed beryllium
DW Brown et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Application of a substructure-based hardening model to copper under loading path changes
S Mahesh et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Texture analysis with the new HIPPO TOF diffractometer
HR Wenk et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT (2003)
A neutron diffraction and modeling study of uniaxial deformation in polycrystalline beryllium
DW Brown et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)
SMARTS - a spectrometer for strain measurement in engineering materials
MAM Bourke et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2002)
Cryogenically cooled bent double-Laue monochromator for high-energy undulator X-rays (50-200 keV)
SD Shastri et al.
JOURNAL OF SYNCHROTRON RADIATION (2002)
Mechanical response of zirconium -: I.: Derivation of a polycrystal constitutive law and finite element analysis
CN Tomé et al.
ACTA MATERIALIA (2001)
Work-hardening/softening behaviour of BCC polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress-strain behaviour of an if steel during two-stage strain paths
B Peeters et al.
ACTA MATERIALIA (2001)
Overview -: Residual stress part 1 -: Measurement techniques
PJ Withers et al.
MATERIALS SCIENCE AND TECHNOLOGY (2001)
分享论文
