相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。In-situ high-energy X-ray diffraction and crystal plasticity modeling to predict the evolution of texture, twinning, lattice strains and strength during loading and reloading of beryllium
Nicholas C. Ferreri et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2022)
Stress-assisted (γ→α′) and strain-induced (γ→ε→α′) phase transformation kinetics laws implemented in a crystal plasticity model for predicting strain path sensitive deformation of austenitic steels
Zhangxi Feng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Modeling the role of local crystallographic correlations in microstructures of Ti-6A1-4V using a correlated structure visco-plastic self-consistent polycrystal plasticity formulation
Iftekhar A. Riyad et al.
ACTA MATERIALIA (2021)
Modeling of cyclic hardening and evaluation of plastic strain range in the presence of pre-loading and ratcheting
Nobutada Ohno et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Direct observation of the dynamic evolution of precipitates in aluminium alloy 7021 at high strain rates via high energy synchrotron X-rays
W. U. Mirihanage et al.
ACTA MATERIALIA (2021)
Identification of crystal plasticity model parameters by multi-objective optimization integrating microstructural evolution and mechanical data
Daniel J. Savage et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2021)
A crystal plasticity finite element model embedding strain-rate sensitivities inherent to deformation mechanisms: Application to alloy AZ31
William G. Feather et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2021)
Experimental characterization and crystal plasticity modeling of anisotropy, tension-compression asymmetry, and texture evolution of additively manufactured Inconel 718 at room and elevated temperatures
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
A multi-GPU implementation of a full-field crystal plasticity solver for efficient modeling of high-resolution microstructures
Adnan Eghtesad et al.
COMPUTER PHYSICS COMMUNICATIONS (2020)
Inferring Post-Necking Strain Hardening Behavior of Sheets by a Combination of Continuous Bending Under Tension Testing and Finite Element Modeling
C. M. Poulin et al.
EXPERIMENTAL MECHANICS (2020)
Modeling of the thermo-mechanical response and texture evolution of WE43 Mg alloy in the dynamic recrystallization regime using a viscoplastic self-consistent formulation
Miroslav Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Predicting deformation behavior of α-uranium during tension, compression, load reversal, rolling, and sheet forming using elasto-plastic, multi-level crystal plasticity coupled with finite elements
Timothy J. Barrett et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2020)
Experimental studies into the role of cyclic bending during stretching of dual-phase steel sheets
Camille M. Poulin et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2020)
Modeling material behavior during continuous bending under tension for inferring the post-necking strain hardening response of ductile sheet metals: Application to DP 780 steel
Timothy Barrett et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2020)
A comparative study between elasto-plastic self-consistent crystal plasticity and anisotropic yield function with distortional hardening formulations for sheet metal forming
Zhangxi Feng et al.
MECHANICS OF MATERIALS (2020)
Deep drawing simulations using the finite element method embedding a multi-level crystal plasticity constitutive law: Experimental verification and sensitivity analysis
Timothy J. Barrett et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2019)
Mechanical response, twinning, and texture evolution of WE43 magnesium-rare earth alloy as a function of strain rate: Experiments and multi-level crystal plasticity modeling
William G. Feather et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Strengthening of alloy AA6022-T4 by continuous bending under tension
Marko Knezevic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
An implicit formulation of the elasto-plastic self-consistent polycrystal plasticity model and its implementation in implicit finite elements
Milovan Zecevic et al.
MECHANICS OF MATERIALS (2019)
Over five-times improved elongation-to-fracture of dual-phase 1180 steel by continuous-bending-under-tension
Camille M. Poulin et al.
MATERIALS & DESIGN (2019)
A crystallographic extension to the Olson-Cohen model for predicting strain path dependence of martensitic transformation
Milovan Zecevic et al.
ACTA MATERIALIA (2019)
A generalized spherical harmonics-based procedure for the interpolation of partial datasets of orientation distributions to enable crystal mechanics-based simulations
Timothy J. Barrett et al.
MATERIALIA (2019)
Compact reconstruction of orientation distributions using generalized spherical harmonics to advance large-scale crystal plasticity modeling: Verification using cubic, hexagonal, and orthorhombic polycrystals
Adnan Eghtesad et al.
ACTA MATERIALIA (2018)
Multiscale Modeling of Microstructure-Property Relationships of Polycrystalline Metals during Thermo-Mechanical Deformation
Marko Knezevic et al.
ADVANCED ENGINEERING MATERIALS (2018)
Latent hardening within the elasto-plastic self-consistent polycrystal homogenization to enable the prediction of anisotropy of AA6022-T4 sheets
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Modeling of intragranular misorientation and grain fragmentation in polycrystalline materials using the viscoplastic self-consistent formulation
Miroslav Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Activity of pyramidal I and II <c plus a> slip in Mg alloys as revealed by texture development
Miroslav Zecevic et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2018)
A new visco-plastic self-consistent formulation implicit in dislocation-based hardening within implicit finite elements: Application to high strain rate and impact deformation of tantalum
Miroslav Zecevic et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
OpenMP and MPI implementations of an elasto-viscoplastic fast Fourier transform-based micromechanical solver for fast crystal plasticity modeling
Adnan Eghtesad et al.
ADVANCES IN ENGINEERING SOFTWARE (2018)
Spectral database constitutive representation within a spectral micromechanical solver for computationally efficient polycrystal plasticity modelling
Adnan Eghtesad et al.
COMPUTATIONAL MECHANICS (2018)
Elevated Temperature Effects on the Plastic Anisotropy of an Extruded Mg-4 Wt Pct Li Alloy: Experiments and Polycrystal Modeling
Marcel Risse et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)
A crystal plasticity model incorporating the effects of precipitates in superalloys: Application to tensile, compressive, and cyclic deformation of Inconel 718
Saeede Ghorbanpour et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Coupling elasto-plastic self-consistent crystal plasticity and implicit finite elements: Applications to compression, cyclic tension-compression, and bending to large strains
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2017)
Modeling of Sheet Metal Forming Based on Implicit Embedding of the Elasto-Plastic Self-Consistent Formulation in Shell Elements: Application to Cup Drawing of AA6022-T4
Milovan Zecevic et al.
JOM (2017)
An investigation of the strain dependence of dynamic precipitation in an Al-Zn-Mg-Cu alloy
L. Couturier et al.
SCRIPTA MATERIALIA (2017)
Predicting intragranular misorientation distributions in polycrystalline metals using the viscoplastic self-consistent formulation
Miroslav Zecevic et al.
ACTA MATERIALIA (2017)
Average intragranular misorientation trends in polycrystalline materials predicted by a viscoplastic self-consistent approach
Ricardo A. Lebensohn et al.
ACTA MATERIALIA (2016)
Anisotropic modeling of structural components using embedded crystal plasticity constructive laws within finite elements
Marko Knezevic et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2016)
Latent hardening and plastic anisotropy evolution in AA6060 aluminium alloy
M. Khadyko et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Strain rate and temperature sensitive multi-level crystal plasticity model for large plastic deformation behavior: Application to AZ31 magnesium alloy
Milan Ardeljan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Dual-phase steel sheets under cyclic tension-compression to large strains: Experiments and crystal plasticity modeling
Milovan Zecevic et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2016)
Origin of texture development in orthorhombic uranium
Miroslav Zecevic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Residual Ductility and Microstructural Evolution in Continuous-Bending-under-Tension of AA-6022-T4
Milovan Zecevic et al.
MATERIALS (2016)
In situ X-ray diffraction and crystal plasticity modeling of the deformation behavior of extruded Mg-Li-(Al) alloys: An uncommon tension-compression asymmetry
Martin Lentz et al.
ACTA MATERIALIA (2015)
A dislocation density based elasto-plastic self-consistent model for the prediction of cyclic deformation: Application to AA6022-T4
Milovan Zecevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
Mechanical behavior of Mg subjected to strain path changes: Experiments and modeling
W. Wen et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2015)
High-Pressure Double Torsion as a Severe Plastic Deformation Process: Experimental Procedure and Finite Element Modeling
Mohammad Jahedi et al.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2015)
An elasto-plastic self-consistent model with hardening based on dislocation density, twinning and de-twinning: Application to strain path changes in HCP metals
Milovan Zecevic et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Procedures for reducing large datasets of crystal orientations using generalized spherical harmonics
Marko Knezevic et al.
MECHANICS OF MATERIALS (2015)
An Overview of High-Performance Aircraft Structural Al Alloy-AA7085
T. Ram Prabhu
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2015)
Observations on the Nonlinear Unloading Behavior of Advanced High Strength Steels
Erik J. Pavlina et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Material-based design of the extrusion of bimetallic tubes
Marko Knezevic et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Crystal plasticity modeling of the effect of precipitate states on the work hardening and plastic anisotropy in an Al-Mg-Si alloy
N. Anjabin et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Effective method for fitting complex constitutive equations
A. Smith et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
A texture-based representative volume element crystal plasticity model for predicting Bauschinger effect during cyclic loading
Ling Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Texture evolution and enhanced grain refinement under high-pressure-double-torsion
Mohammad Jahedi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Evaluating the significance of hardening behavior and unloading modulus under strain reversal in sheet springback prediction
Shun-lai Zang et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2013)
Long range internal stresses in single-phase crystalline materials
M. E. Kassner et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Advanced Issues in springback
Robert H. Wagoner et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
A crystallographic dislocation model for describing hardening of polycrystals during strain path changes. Application to low carbon steels
K. Kitayama et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
A polycrystal plasticity model for predicting mechanical response and texture evolution during strain-path changes: Application to beryllium
Marko Knezevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Integration of self-consistent polycrystal plasticity with dislocation density based hardening laws within an implicit finite element framework: Application to low-symmetry metals
Marko Knezevic et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2013)
In situ TEM observations of reverse dislocation motion upon unloading in tensile-deformed UFG aluminium
Frederic Mompiou et al.
ACTA MATERIALIA (2012)
Dislocation dynamics simulations of the Bauschinger effect in metallic thin films
Caizhi Zhou et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
A slip system-based kinematic hardening model application to in situ neutron diffraction of cyclic deformation of austenitic stainless steel
J. A. Wollmershauser et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
An elasto-viscoplastic formulation based on fast Fourier transforms for the prediction of micromechanical fields in polycrystalline materials
Ricardo A. Lebensohn et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Multiscale modeling of plasticity based on embedding the viscoplastic self-consistent formulation in implicit finite elements
Javier Segurado et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Experimental evaluation and constitutive modeling of non-proportional deformation for asymmetric steels
Rahul K. Verma et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
Deformation twinning in AZ31: Influence on strain hardening and texture evolution
Marko Knezevic et al.
ACTA MATERIALIA (2010)
Mechanical and microstructural single-crystal Bauschinger effects: Observation of reversible plasticity in copper during bending
Eralp Demir et al.
ACTA MATERIALIA (2010)
Modeling lattice strain evolution at finite strains and experimental verification for copper and stainless steel using in situ neutron diffraction
C. J. Neil et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
Crystal plasticity simulations using discrete Fourier transforms
Marko Knezevic et al.
ACTA MATERIALIA (2009)
Tension-compression asymmetry of phosphor bronze for electronic parts and its effect on bending behavior
Toshihiko Kuwabara et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Analytical modelling of intragranular backstresses due to deformation induced dislocation microstructures
M. Sauzay
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
A review of some plasticity and viscoplasticity constitutive theories
J. L. Chaboche
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Delineation of first-order closures for plastic properties requiring explicit consideration of strain hardening and crystallographic texture evolution
Marko Knezevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Computationally efficient database and spectral interpolation for fully plastic Taylor-type crystal plasticity calculations of face-centered cubic polycrystals
Marko Knezevic et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
A dislocation-based constitutive law for pure Zr including temperature effects
I. J. Beyerlein et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Fast computation of first-order elastic-plastic closures for polycrystalline cubic-orthorhombic microstructures
Marko Knezevic et al.
COMPUTATIONAL MATERIALS SCIENCE (2007)
Spectral calibration of crystal plasticity models
SR Kalidindi et al.
ACTA MATERIALIA (2006)
Physical analyses of crystal plasticity by DD simulations
B Devincre et al.
SCRIPTA MATERIALIA (2006)
On pre-straining and the evolution of material anisotropy in sheet metals
PD Wu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
Continuous, large strain, tension/compression testing of sheet material
RK Boger et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
Artificial aging and shear deformation behaviour of 6022 aluminium alloy
JJ Gracio et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2004)
Plastic flow for non-monotonic loading conditions of an aluminum alloy sheet sample
F Barlat et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2003)
Elastic-plastic behavior of steel sheets under in-plane cyclic tension-compression at large strain
F Yoshida et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2002)
Modeling the Bauschinger effect for sheet metals, part I: theory
BK Chun et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2002)
Work-hardening/softening behaviour of BCC polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress-strain behaviour of an if steel during two-stage strain paths
B Peeters et al.
ACTA MATERIALIA (2001)
Rate-independent crystalline and polycrystalline plasticity, application to FCC materials
R Knockaert et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2000)
分享论文
