相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Microstructural features effect on the evolution of cyclic damage for polycrystalline metals using a multiscale approach
Moussa Bouchedjra et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2021)
Complex interactions between precipitation, grain growth and recrystallization in a severely deformed Al-Zn-Mg-Cu alloy and on the mechanical behavior
Amandine Duchaussoy et al.
MATERIALIA (2021)
A full-field crystal-plasticity analysis of bimodal polycrystals
B. Flipon et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Microscopic heterogeneity of plastic strain and lattice rotation in partially recrystallized copper polycrystals
Fengxiang Lin et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2020)
Crystal plasticity modeling of the cyclic behavior of polycrystalline aggregates under non-symmetric uniaxial loading: Global and local analyses
Harris Farooq et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2020)
Deformation mechanisms and strain rate sensitivity of bimodal and ultrafine-grained copper
J. Bach et al.
ACTA MATERIALIA (2020)
Hetero-deformation induced (HDI) hardening does not increase linearly with strain gradient
Y. F. Wang et al.
SCRIPTA MATERIALIA (2020)
Extra-strengthening in a harmonic structure designed pure titanium due to preferential recrystallization phenomenon through thermomechanical treatment
Bhupendra Sharma et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Towards understanding the structure-property relationships of heterogeneous-structured materials
Jianguo Li et al.
SCRIPTA MATERIALIA (2020)
Elucidating the Effect of Bimodal Grain Size Distribution on Plasticity and Fracture Behavior of Polycrystalline Materials
Fabrice Barbe et al.
JOURNAL OF MULTISCALE MODELLING (2020)
Dislocation mechanism based size-dependent crystal plasticity modeling and simulation of gradient nano-grained copper
Xiaochong Lu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2019)
Representative volume element size determination for viscoplastic properties in polycrystalline materials
S. Yang et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2019)
Structure and mechanical behavior of ultrafine-grained aluminum-iron alloy stabilized by nanoscaled intermetallic particles
Amandine Duchaussoy et al.
ACTA MATERIALIA (2019)
Perspective on hetero-deformation induced (HDI) hardening and back stress
Yuntian Zhu et al.
MATERIALS RESEARCH LETTERS (2019)
A 3D crystal plasticity model of monotonic and cyclic simple shear deformation for commercial-purity polycrystalline Ti with a harmonic structure
Xiang Wang et al.
MECHANICS OF MATERIALS (2019)
Anneal hardening and elevated temperature strain rate sensitivity of nanostructured metals: Their relation to intergranular dislocation accommodation
O. Renk et al.
ACTA MATERIALIA (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Optimal polyhedral description of 3D polycrystals: Method and application to statistical and synchrotron X-ray diffraction data
Romain Quey et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
A reduced micromorphic single crystal plasticity model at finite deformations. Application to strain localization and void growth in ductile metals
Chao Ling et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2018)
Superior strength and ductility of 316L stainless steel with heterogeneous lamella structure
Jiansheng Li et al.
JOURNAL OF MATERIALS SCIENCE (2018)
Tensile properties of spark plasma sintered AISI 316L stainless steel with unimodal and bimodal grain size distributions
B. Flipon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Numerical analysis of the effect of surface roughness on mechanical fields in polycrystalline aggregates
Yoann Guilhem et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2018)
Additional hardening in harmonic structured materials by strain partitioning and back stress
Hyung Keun Park et al.
MATERIALS RESEARCH LETTERS (2018)
Conventional vs harmonic-structured beta-Ti-25Nb-25Zr alloys: A comparative study of deformation mechanisms
F. Mompiou et al.
ACTA MATERIALIA (2018)
Annealing of strain-induced martensite to obtain micro/nanometre grains in austenitic stainless
H. Wu et al.
MATERIALS SCIENCE AND TECHNOLOGY (2017)
Achieving high strength and high ductility in 304 stainless steel through bi-modal microstructure prepared by post-ECAP annealing
Z. J. Zheng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Fatigue behavior of a harmonic structure designed austenitic stainless steel under uniaxial stress loading
Zhe Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Towards strength-ductility synergy through the design of heterogeneous nanostructures in metals
Evan Ma et al.
MATERIALS TODAY (2017)
Heterogeneous materials: a new class of materials with unprecedented mechanical properties
Xiaolei Wu et al.
MATERIALS RESEARCH LETTERS (2017)
Elaboration of Austenitic Stainless Steel Samples with Bimodal Grain Size Distributions and Investigation of their Mechanical Behavior
B. Flipon et al.
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2017) (2017)
Impact of the nanostructuration on the corrosion resistance and hardness of irradiated 316 austenitic stainless steels
E. Hug et al.
APPLIED SURFACE SCIENCE (2017)
Coupling Diffraction Contrast Tomography with the Finite Element Method
Henry Proudhon et al.
ADVANCED ENGINEERING MATERIALS (2016)
Failure of metals III: Fracture and fatigue of nanostructured metallic materials
Andre Pineau et al.
ACTA MATERIALIA (2016)
Mechanical properties of copper/bronze laminates: Role of interfaces
Xiaolong Ma et al.
ACTA MATERIALIA (2016)
Micromorphic crystal plasticity versus discrete dislocation dynamics analysis of multilayer pile-up hardening in a narrow channel
Hyung-Jun Chang et al.
ARCHIVE OF APPLIED MECHANICS (2016)
The role of complexions in metallic nano-grain stability and deformation
Timothy J. Rupert
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2016)
A multi-scale approach to investigate the nonlinear subsurface behavior and strain localization of X38CrMoV5-1 martensitic tool steel: Experiment and numerical analysis
A. Zouaghi et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
Plastic deformation mechanisms of ultrafine-grained copper in the temperature range of 4.2-300K
N. V. Isaev et al.
LOW TEMPERATURE PHYSICS (2016)
Effect of bimodal harmonic structure design on the deformation behaviour and mechanical properties of Co-Cr-Mo alloy
Sanjay Kumar Vajpai et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Influence of spark plasma sintering conditions on the sintering and functional properties of an ultra-fine grained 316L stainless steel obtained from ball-milled powder
C. Keller et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Identification of crystal plasticity parameters using DIC measurements and weighted FEMU
Adrien Guery et al.
MECHANICS OF MATERIALS (2016)
Amorphous intergranular films act as ultra-efficient point defect sinks during collision cascades
Joseph E. Ludy et al.
SCRIPTA MATERIALIA (2016)
Three-dimensionally gradient harmonic structure design: an integrated approach for high performance structural materials
Sanjay Kumar Vajpai et al.
MATERIALS RESEARCH LETTERS (2016)
Modelling of microstructural effects on the mechanical behavior of ultrafine-grained Nickel using crystal plasticity finite element model
Van-Tung Phan et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2015)
Investigation of deformation micro-mechanisms in nickel consolidated from a bimodal powder by spark plasma sintering
D. Tingaud et al.
MATERIALS CHARACTERIZATION (2015)
Representation of a microstructure with bimodal grain size distribution through crystal plasticity and cohesive interface modeling
Andrew C. Magee et al.
MECHANICS OF MATERIALS (2015)
Heterogeneous lamella structure unites ultrafine-grain strength with coarse-grain ductility
Xiaolei Wu et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2015)
The Development of High Performance Ti-6Al-4V Alloy via a Unique Microstructural Design with Bimodal Grain Size Distribution
Sanjay Kumar Vajpai et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2015)
Damage nucleation from repeated dislocation absorption at a grain boundary
Zhiliang Pan et al.
COMPUTATIONAL MATERIALS SCIENCE (2014)
Micromechanical investigation of the influence of defects in high cycle fatigue
R. Guerchais et al.
INTERNATIONAL JOURNAL OF FATIGUE (2014)
Grain size dependence of the strength of metals: The Hall-Petch effect does not scale as the inverse square root of grain size
D. J. Dunstan et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2014)
Functional properties of a spark plasma sintered ultrafine-grained 316L steel
Gael Marnier et al.
MATERIALS & DESIGN (2014)
Improvement of mechanical properties in SUS304L steel through the control of bimodal microstructure characteristics
Zhe Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Segregation Stabilizes Nanocrystalline Bulk Steel with Near Theoretical Strength
Yujiao Li et al.
PHYSICAL REVIEW LETTERS (2014)
Effects of grain size distribution and stress heterogeneity on yield stress of polycrystals: A numerical approach
F. Lavergne et al.
COMPUTATIONAL MATERIALS SCIENCE (2013)
Modeling of latent hardening produced by complex loading paths in FCC alloys
C. Gerard et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2013)
Lattice strain measurements using synchrotron diffraction to calibrate a micromechanical modeling in a ferrite-cementite steel
V. Taupin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Obtaining Copper with Harmonic Structure for the Optimal Balance of Structure-Performance Relationship
Dmitry Orlov et al.
MATERIALS TRANSACTIONS (2013)
Modelling Polycrystalline Materials: An Overview of Three-Dimensional Grain-Scale Mechanical Models
I. Benedetti et al.
JOURNAL OF MULTISCALE MODELLING (2013)
Effects of tensile test parameters on the mechanical properties of a bimodal Al-Mg alloy
Andrew Magee et al.
ACTA MATERIALIA (2012)
Micromechanical local approach to brittle failure in bainite high resolution polycrystals: A short presentation
C. N. N'Guyen et al.
COMPUTATIONAL MATERIALS SCIENCE (2012)
Modelling the plastic deformation of nanostructured metals with bimodal grain size distribution
Linli Zhu et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Finite element analysis of the free surface effects on the mechanical behavior of thin nickel polycrystals
C. Keller et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2012)
Large-scale 3D random polycrystals for the finite element method: Generation, meshing and remeshing
R. Quey et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2011)
A numerical modelling of 3D polycrystal-to-polycrystal diffusive phase transformations involving crystal plasticity
F. Barbe et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
Microstructural size effects on mechanical properties of high purity nickel
C. Keller et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
Comparison of radiation-induced segregation in ultrafine-grained and conventional 316 austenitic stainless steels
A. Etienne et al.
ULTRAMICROSCOPY (2011)
On particle size effects: An internal length mean field approach using field dislocation mechanics
V. Taupin et al.
ACTA MATERIALIA (2010)
Size effects in generalised continuum crystal plasticity for two-phase laminates
N. M. Cordero et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2010)
Microstructure and mechanical characteristics of bulk polycrystalline Ni consolidated from blends of powders with different particle size
G. Dirras et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Atomistic simulation of a dislocation shear loop interacting with grain boundaries in nanocrystalline aluminium
E. Bitzek et al.
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2009)
Three-dimensional characterization of strain localization bands in high-resolution elastoplastic polycrystals
Fabrice Barbe et al.
MECHANICS RESEARCH COMMUNICATIONS (2009)
3D simulations of microstructure and comparison with experimental microstructure coming from OIM analysis
L. St-Pierre et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2008)
Irradiation behavior of nanostructured 316 austenitic stainless steel
B. Radiguet et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Some links between Cosserat, strain gradient crystal plasticity and the statistical theory of dislocations
S. Forest
PHILOSOPHICAL MAGAZINE (2008)
Optimizing the strength and ductility of fine structured 2024 Al alloy by nano-precipitation
S. Cheng et al.
ACTA MATERIALIA (2007)
Toward a quantitative understanding of mechanical behavior of nanocrystalline metals
M. Dao et al.
ACTA MATERIALIA (2007)
Impact of the grain size distribution on the yield stress of heterogeneous materials
S. Berbenni et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2007)
Effects of grain size on dislocation organization and internal stresses developed under tensile loading in fcc metals
X. Feaugas et al.
PHILOSOPHICAL MAGAZINE (2007)
Cooperative grain boundary sliding in nanocrystalline materials
A. V. Sergueeva et al.
PHILOSOPHICAL MAGAZINE (2006)
Modeling the constitutive response of bimodal metals
S. P. Joshi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Effects of grain size distribution on the mechanical response of nanocrystalline metals: Part II
B. Zhu et al.
ACTA MATERIALIA (2006)
Mechanical properties of nanocrystalline materials
MA Meyers et al.
PROGRESS IN MATERIALS SCIENCE (2006)
Nucleation and propagation of dislocations in nanocrystalline fcc metals
H Van Swygenhoven et al.
ACTA MATERIALIA (2006)
Eight routes to improve the tensile ductility of bulk nanostructured metals and alloys
E Ma
JOM (2006)
Influence of grain size on deformation mechanisms: An extension to nanocrystalline materials
YT Zhu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Evaluation of finite element based analysis of 3D multicrystalline aggregates plasticity - Application to crystal plasticity model identification and the study of stress and strain fields near grain boundaries
O Diard et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2005)
Ultrahigh strength and high electrical conductivity in copper
L Lu et al.
SCIENCE (2004)
Non-local crystal plasticity model with intrinsic SSD and GND effects
LP Evers et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2004)
Scale dependent crystal plasticity framework with dislocation density and grain boundary effects
LP Evers et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2004)
Grain-size effects on tensile behavior of nickel and AlSi 316L stainless steel
X Feaugas et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)
Modeling the evolution of crystallographic dislocation density in crystal plasticity
A Arsenlis et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)
Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: FE model
F Barbe et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2001)
Intergranular and intragranular behavior of polycrystalline aggregates. Part 2: Results
F Barbe et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2001)
Cosserat modelling of size effects in the mechanical behaviour of polycrystals and multi-phase materials
S Forest et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2000)
分享论文
