相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Development of mAb-loaded 3D-printed (FDM) implantable devices based on PLGA
E. Carlier et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2021)
Poly(lactic-co-glycolic acid)-based composite bone-substitute materials
Duoyi Zhao et al.
BIOACTIVE MATERIALS (2021)
Recent advances in PLGA-based biomaterials for bone tissue regeneration
Shue Jin et al.
ACTA BIOMATERIALIA (2021)
Metal-Based Nanostructures/PLGA Nanocomposites: Antimicrobial Activity, Cytotoxicity, and Their Biomedical Applications
Ehsan Nazarzadeh Zare et al.
ACS APPLIED MATERIALS & INTERFACES (2020)
Functional Biomaterials for Bone Regeneration: A Lesson in Complex Biology
Angela Rita Armiento et al.
ADVANCED FUNCTIONAL MATERIALS (2020)
Progress in 3D bioprinting technology for tissue/organ regenerative engineering
Ishita Matai et al.
BIOMATERIALS (2020)
Electroactive composite scaffold with locally expressed osteoinductive factor for synergistic bone repair upon electrical stimulation
Liguo Cui et al.
BIOMATERIALS (2020)
Fundamental insights in PLGA degradation from thin film studies
Rainhard Machatschek et al.
JOURNAL OF CONTROLLED RELEASE (2020)
Bone regeneration of minipig mandibular defect by adipose derived mesenchymal stem cells seeded tri-calcium phosphate- poly(D,L-lactide-co-glycolide) scaffolds
Florian Andreas Probst et al.
SCIENTIFIC REPORTS (2020)
Promotion of Osseointegration between Implant and Bone Interface by Titanium Alloy Porous Scaffolds Prepared by 3D Printing
Yuhao Zheng et al.
ACS BIOMATERIALS SCIENCE & ENGINEERING (2020)
Materials design for bone-tissue engineering
Gerry L. Koons et al.
NATURE REVIEWS MATERIALS (2020)
The ultralong-term comparison of osteogenic behavior of three scaffolds with different matrices and degradability between one and two years
Jinhui Huang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2020)
An osteoconductive PLGA scaffold with bioactive β-TCP and anti-inflammatory Mg(OH)2 to improve in vivo bone regeneration
Eun Jin Go et al.
BIOMATERIALS SCIENCE (2020)
Materdicine: Interdiscipline of materials and medicine
Huijing Xiang et al.
VIEW (2020)
PLGA/β-TCP composite scaffold incorporating salvianolic acid B promotes bone fusion by angiogenesis and osteogenesis in a rat spinal fusion model
Sien Lin et al.
BIOMATERIALS (2019)
Experimental study of rhBMP-2 chitosan nano-sustained release carrier-loaded PLGA/nHA scaffolds to construct mandibular tissue-engineered bone
Nan Deng et al.
ARCHIVES OF ORAL BIOLOGY (2019)
Osteogenic magnesium incorporated into PLGA/TCP porous scaffold by 3D printing for repairing challenging bone defect
Yuxiao Lai et al.
BIOMATERIALS (2019)
Biomaterials for tissue repair
Karen L. Christman
SCIENCE (2019)
Novel Strategy to Accelerate Bone Regeneration of Calcium Phosphate Cement by Incorporating 3D Plotted Poly(lactic-co-glycolic acid) Network and Bioactive Wollastonite
Guowen Qian et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Polymer encapsulation of ruthenium complexes for biological and medicinal applications
Elise Villemin et al.
NATURE REVIEWS CHEMISTRY (2019)
3D Bioprinting: from Benches to Translational Applications
Marcel Alexander Heinrich et al.
SMALL (2019)
Influence of Short-Range Scrambling of Monomer Order on the Hydrolysis Behaviors of Sequenced Degradable Polyesters
Jamie A. Nowalk et al.
MACROMOLECULES (2019)
Regulation of an osteon-like concentric microgrooved surface on osteogenesis and osteoclastogenesis
Mengjie Li et al.
BIOMATERIALS (2019)
The application of BMP-12-overexpressing mesenchymal stem cells loaded 3D-printed PLGA scaffolds in rabbit rotator cuff repair
Peng Chen et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2019)
Three-dimensional (3D) printed scaffold and material selection for bone repair
Lei Zhang et al.
ACTA BIOMATERIALIA (2019)
Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone
Ali Entezari et al.
ADVANCED HEALTHCARE MATERIALS (2019)
Fabrication and mechanical characterization of 3D printed vertical uniform and gradient scaffolds for bone and osteochondral tissue engineering
Sean M. Bittner et al.
ACTA BIOMATERIALIA (2019)
The long-term behaviors and differences in bone reconstruction of three polymer-based scaffolds with different degradability
Jinhui Huang et al.
JOURNAL OF MATERIALS CHEMISTRY B (2019)
Functionalizing PLGA and PLGA Derivatives for Drug Delivery and Tissue Regeneration Applications
Claudia Martins et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Multilayered Scaffold with a Compact Interfacial Layer Enhances Osteochondral Defect Repair
Shuaijun Jia et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Comparison of the degradation behavior of PLGA scaffolds in micro-channel, shaking, and static conditions
C. H. Ma et al.
BIOMICROFLUIDICS (2018)
Fractal-like hierarchical organization of bone begins at the nanoscale
Natalie Reznikov et al.
SCIENCE (2018)
Dual-functional 3D-printed composite scaffold for inhibiting bacterial infection and promoting bone regeneration in infected bone defect models
Ying Yang et al.
ACTA BIOMATERIALIA (2018)
Topographically Defined, Biodegradable Nanopatterned Patches to Regulate Cell Fate and Acceleration of Bone Regeneration
Min Suk Lee et al.
ACS APPLIED MATERIALS & INTERFACES (2018)
Micropatterned Scaffolds with Immobilized Growth Factor Genes Regenerate Bone and Periodontal Ligament-Like Tissues
Sophia P. Pilipchuk et al.
ADVANCED HEALTHCARE MATERIALS (2018)
Effects of PCL, PEG and PLGA polymers on curcumin release from calcium phosphate matrix for in vitro and in vivo bone regeneration
Susmita Bose et al.
MATERIALS TODAY CHEMISTRY (2018)
Nanotopography-based strategy for the precise manipulation of osteoimmunomodulation in bone regeneration
Zetao Chen et al.
NANOSCALE (2017)
Comparison of 3D-Printed Poly-ε-Caprolactone Scaffolds Functionalized with Tricalcium Phosphate, Hydroxyapatite, Bio-Oss, or Decellularized Bone Matrix
Ethan Nyberg et al.
TISSUE ENGINEERING PART A (2017)
Visualizing Angiogenesis by Multiphoton Microscopy In Vivo in Genetically Modified 3D-PLGA/nHAp Scaffold for Calvarial Critical Bone Defect Repair
Jian Li et al.
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS (2017)
Comparative Efficacies of Collagen-Based 3D Printed PCL/PLGA/β-TCP Composite Block Bone Grafts and Biphasic Calcium Phosphate Bone Substitute for Bone Regeneration
Kyoung-Sub Hwang et al.
MATERIALS (2017)
3D printing PLGA: a quantitative examination of the effects of polymer composition and printing parameters on print resolution
Ting Guo et al.
BIOFABRICATION (2017)
The Horizon of Materiobiology: A Perspective on Material-Guided Cell Behaviors and Tissue Engineering
Yulin Li et al.
CHEMICAL REVIEWS (2017)
Hybrid scaffolds based on PLGA and silk for bone tissue engineering
Faheem A. Sheikh et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2016)
Fabrication of functional PLGA-based electrospun scaffolds and their applications in biomedical engineering
Wen Zhao et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)
Bone-Healing Capacity of PCL/PLGA/Duck Beak Scaffold in Critical Bone Defects in a Rabbit Model
Jae Yeon Lee et al.
BIOMED RESEARCH INTERNATIONAL (2016)
Layering PLGA-based electrospun membranes and cell sheets for engineering cartilage-bone transition
P. -A. Mouthuy et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2016)
Evaluation of 3D printed PCL/PLGA/β-TCP versus collagen membranes for guided bone regeneration in a beagle implant model
J-Y Won et al.
BIOMEDICAL MATERIALS (2016)
Biomaterials for Bone Regenerative Engineering
Xiaohua Yu et al.
ADVANCED HEALTHCARE MATERIALS (2015)
An Overview of Poly(lactic-co-glycolic) Acid (PLGA)-Based Biomaterials for Bone Tissue Engineering
Piergiorgio Gentile et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2014)
Prolonged presence of VEGF promotes vascularization in 3D bioprinted scaffolds with defined architecture
Michelle T. Poldervaart et al.
JOURNAL OF CONTROLLED RELEASE (2014)
Three-Dimensional Printing of rhBMP-2-Loaded Scaffolds with Long-Term Delivery for Enhanced Bone Regeneration in a Rabbit Diaphyseal Defect
Jin-Hyung Shim et al.
TISSUE ENGINEERING PART A (2014)
Efficacy of rhBMP-2 loaded PCL/PLGA/β-TCP guided bone regeneration membrane fabricated by 3D printing technology for reconstruction of calvaria defects in rabbit
Jin-Hyung Shim et al.
BIOMEDICAL MATERIALS (2014)
PLGA/TCP composite scaffold incorporating bioactive phytomolecule icaritin for enhancement of bone defect repair in rabbits
S. -H. Chen et al.
ACTA BIOMATERIALIA (2013)
Fabrication of mineralized electrospun PLGA and PLGA/gelatin nanofibers and their potential in bone tissue engineering
Z. X. Meng et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)
Porosity and mechanically optimized PLGA based in situ hardening systems
W. Schloegl et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2012)
Rapid-prototyped PLGA/β-TCP/hydroxyapatite nanocomposite scaffolds in a rabbit femoral defect model
Jinku Kim et al.
BIOFABRICATION (2012)
Solid Free-Form Fabrication of Tissue-Engineering Scaffolds with a Poly(lactic-co-glycolic acid) Grafted Hyaluronic Acid Conjugate Encapsulating an Intact Bone Morphogenetic Protein-2/Poly(ethylene glycol) Complex
Jung Kyu Park et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Decellularized PLGA-based scaffolds and their osteogenic potential with bone marrow stromal cells
Yu Jin Hong et al.
MACROMOLECULAR RESEARCH (2011)
High Doses of Bone Morphogenetic Protein 2 Induce Structurally Abnormal Bone and Inflammation In Vivo
Janette N. Zara et al.
TISSUE ENGINEERING PART A (2011)
A bFGF-releasing silk/PLGA-based biohybrid scaffold for ligament/tendon tissue engineering using mesenchymal progenitor cells
Sambit Sahoo et al.
BIOMATERIALS (2010)
The return of a forgotten polymer-Polycaprolactone in the 21st century
Maria Ann Woodruff et al.
PROGRESS IN POLYMER SCIENCE (2010)
Histological evaluation of osteogenesis of 3D-printed poly-lactic-co-glycolic acid (PLGA) scaffolds in a rabbit model
Zigang Ge et al.
BIOMEDICAL MATERIALS (2009)
Blended PCL/PLGA scaffold fabrication using multi-head deposition system
Jong Young Kim et al.
MICROELECTRONIC ENGINEERING (2009)
A review of rapid prototyping techniques for tissue engineering purposes
Sanna M. Peltola et al.
ANNALS OF MEDICINE (2008)
Drop-on-demand printing of cells and materials for designer tissue constructs
Thomas Boland et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2007)
How autocatalysis accelerates drug release from PLGA-based microparticles: A quantitative treatment
J Siepmann et al.
BIOMACROMOLECULES (2005)
Fused deposition modeling of novel scaffold architectures for tissue engineering applications
I Zein et al.
BIOMATERIALS (2002)
Osteoinduction, osteoconduction and osseointegration
T Albrektsson et al.
EUROPEAN SPINE JOURNAL (2001)
分享论文
